Metodología para efectuar ensayos de adherencia en barras de anclaje empleadas para la estabilización de taludes en suelos no cohesivos
No Thumbnail Available
Date
2018
Authors
Journal Title
Journal ISSN
Volume Title
Publisher
Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica. Carrera de Ingeniería Civil
Abstract
For the execution of the project, first of all, a documentary - bibliographic investigation
has been carried out, where the regulations that regulate the execution of the test and
the technical specifications with which the equipment was assembled have been found,
in such a way that truthful results are obtained on the Anchor status.
The calibration of the equipment was carried out, testing anchors in a test bench, which
helped to identify all the variables that would be presented during the test, a process
that contributed significantly in the elaboration of the methodology, in which the
procedure is detailed from the calculation that is made to determine the load with
which the operation of the anchor must be evaluated by measuring its adherence, and
also describes the way in which the equipment and all its components must be installed
and operated.
Finally, through the installation of 6 anchor bolts in a sector of the Lateral Passage of
Ambato that has layers of non-cohesive soils, it has been possible to verify the proper
functioning of the equipment when carrying out the corresponding tests.
When there are several areas where slope stabilization has been done with the use of
anchor bolts, with the present project we want to provide for the verification of their
optimal functioning and to make available a manual tool to control future work run in
the locality.
Description
Para la ejecución del proyecto en primer lugar se ha efectuado una investigación
documental – bibliográfica, donde se ha encontrado la normativa que regula la
ejecución del ensayo y las especificaciones técnicas con las que se ensambló el equipo,
de manera que se obtengan resultados veraces sobre el estado del anclaje.
Se efectuó la calibración del equipo, ensayando anclajes en un banco de pruebas, lo
cual ayudó a identificar todas las variables que se presentarían durante el ensayo,
proceso que aportó de manera significativa en la elaboración de la metodología, en la
cual se detalla el procedimiento desde el cálculo que se efectúa para determinar la
carga con la que se debe evaluar el funcionamiento del anclaje mediante la medición
de su adherencia , y también se describe la forma con la que se debe instalar y manejar
el equipo y todos sus componentes.
Por último, mediante la instalación de 6 pernos de anclaje en un sector del Paso Lateral
de Ambato que posee estratos de suelos no cohesivos, se ha podido comprobar el buen
funcionamiento del equipo al efectuar los correspondientes ensayos.
Al existir varias zonas donde se ha realizado estabilización de taludes con el empleo
de pernos de anclaje, con el presente proyecto se quiere aportar para la verificación del
óptimo funcionamiento de los mismos y poner a disposición una herramienta manual
de control de los futuros trabajos que se ejecuten en la localidad.
Keywords
ANCLAJE, SUELOS, ENSAYOS DE LABORATORIO