Estudio del factor de riesgo químico en el ambiente laboral que genera la pintura electrostática en la fábrica de asientos construcciones Valencia
Date
2025
Authors
Journal Title
Journal ISSN
Volume Title
Publisher
Ingeniería Civil y Mecánica. Carrera Ingeniería Mecánica
Abstract
The technical project that was developed about the study of the chemical risk factor that exists in the work environment generated by electrostatic painting in the Valencia seat factory, analyzed the risks of contamination by fine pollutants such as PM 2.5 and PM 10 particles. Problems can be identified in certain sectors where the painting process is carried out, in addition to a shortage of personal protective equipment affecting the health of workers. The topic was chosen because it represents an analytical study of hazardous chemical agents that present a high exposure. In addition, compliance with technical standards for occupational health and safety can be verified in the company that gave us the opportunity to carry it out in its facilities. This project focused on measuring pollutants found in the work environment using the Temtop LKC-1000S device that allowed the measurements to be taken. Quantitative and qualitative approaches were used, including questionnaires that were directed towards operators in order to evaluate and analyze health risks. Analysis of the collected data revealed that there are critical areas in the factory with particle concentrations that exceed the limits established by regulations. Furthermore, existing problems in the work areas were identified. Based on all these detected problems, a plan was developed for corrective measures that can be implemented in companies, such as possible restructuring in certain areas, as well as the implementation of appropriate occupational health and safety protocols
Description
El proyecto experimental que se desarrolló acerca del estudio del factor del riesgo químico que existe en el ambiente laboral que se genera por la pintura electrostática en la fábrica de asientos construcciones Valencia, se analizó los riesgos de contaminación por contaminantes finos como partículas PM 2,5 Y PM 10. Se puede identificar problemas en ciertos sectores donde se realiza el proceso de pintura, además de escasez en equipos de protección personal afectando la salud de los trabajadores, el tema se lo eligió porque representa un estudio de análisis acerca de agentes químicos peligrosos que presentan una alta exposición además que se puede verificar el cumplimiento de normas técnicas de seguridad y salud ocupacional, en la empresa que nos dio una oportunidad de realizarlo en sus instalaciones. Este proyecto se centró en una medición de contaminantes, que se encuentran en el ambiente laboral utilizando el dispositivo Temtop LKC-1000S que permitió realizar las mediciones. Se emplearon enfoques cuantitativos y cualitativos incluyendo cuestionarios que fueron dirigidos hacia operarios para poder evaluar y analizar riesgos a la salud. El análisis de los datos que se recolectan reveló que existen áreas críticas en la fábrica con concentraciones de partículas que exceden los límites que se establecen en las normativas. Además, se puede identificar problemas existentes en las zonas de trabajo. Con todos estos problemas detectados se pudo realizar un plan acerca de medidas correctivas que pueden implementarse en empresas como posibles reestructuraciones en ciertas áreas además de la implementación de protocolos adecuados de seguridad y salud ocupacional.
Keywords
RIESGO QUÍMICO, PINTURA ELECTROSTÁTICA, PARTÍCULAS POR MILLON, SALUD OCUPACIONAL, CONTAMINANTES