Diseño de la red de distribución de agua potable de los barrios nororientales pertenecientes al cantón Cevallos, provincia de Tungurahua
Date
2023-02
Authors
Journal Title
Journal ISSN
Volume Title
Publisher
Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil
Abstract
The present technical project was carried out with the purpose of improving the
distribution and supply of drinking water in the northeastern neighborhoods belonging
to the Cevallos canton, it began with a survey of the study site, then the topographical
survey of the sector was carried out with the Trimble total station. M3, with this to
know all the physical, geographical and geological characteristics of the land.
To know how many inhabitants are immersed in this study, data from the INEC, were
used, after analyzing the data obtained, the following parameters were calculated,
which are: contribution areas, meshes, knots, period of design, growth rate,
endowment, flows, pressure among others, for the determination of the diameters of
the pipes that will be used in the design, the material that was chosen is PVC with a
spigot/bell union which works under pressure, because it is In a rural sector, the INEN
Standards, were used together with the Standard of the Secretary of Water, in the same
way to know the information of the sector, the Land Management Plan of the canton
was used. Cevallos.
The water distribution system works entirely by gravity due to the shape of the surface,
also because it consists of a storage tank in the upper part of the land, to complete the
design, the hydraulic simulation software was used for its respective verification of
results.
Finally, plans were made, price analysis, and a reference budget that will serve at the
time of project execution.
Description
El presente proyecto técnico se realizó con el propósito de mejorar la distribución y
suministro de agua potable de los barrios nororientales pertenecientes al cantón
Cevallos, se inició con un reconocimiento del lugar de estudio, después se realizó el
levantamiento topográfico del sector con la estación total Trimble M3, para conocer
todas las características físicas, geográficas y geológicas del terreno.
Para conocer cuántos habitantes están inmersos en este estudio se utilizaron datos del
INEC, después de analizar los datos obtenidos se procedió a calcular los siguientes
parámetros los cuales son: áreas de aportación, mallas, nudos, periodo de diseño, tasa
de crecimiento, dotación, caudales, presión entre otros. Para la determinación de los
diámetros de las tuberías; el material que se escogió es PVC de unión espigo/campana
la cual trabaja a presión, por ser un sector rural se utilizó las Normas del INEN,
juntamente con la Norma de la Secretaria del Agua, de igual forma para conocer la
información del sector se utilizó el Plan de Ordenamiento Territorial del cantón
Cevallos.
El sistema de distribución de agua trabaja en su totalidad a gravedad por la forma de
la superficie, también porque consta de un tanque de almacenamiento en la parte
superior del terreno, para completar el diseño se utilizó el software de simulación
hidráulica para su respectiva comprobación de resultandos.
Finalmente se realizó un conjunto de planos, análisis de precios, y un presupuesto
referencial que servirá al momento de la ejecución del proyecto.
Keywords
AGUA POTABLE, RED DE DISTRIBUCIÓN, TUBERIA PVC, PRECIOS UNITARIOS, ZONA RURAL