Sistema electrónico para la automatización de la planta de agua potable del Centro Parroquial de Isinliví del cantón Sigchos

Abstract

The objective of this research project was the construction of an electronic system for the automation of the drinking water plant of the Isinliví parish center in the Sigchos canton. It was identified that the Isinliví parish of the Sigchos canton has a drinking water plant located approximately 5 kilometers away from the parish center, however, it does not have a water quality control system, therefore, it is necessary to develop a project that allows improving the conditions of drinking water, which is focused on the automation of chlorination and also on the monitoring of industrial variables. In the project, an automatic electronic system was developed that allows the correct dosage of chlorine in the drinking water reservoir tank of the Isinliví parish, therefore, a control with solenoid valves and acquisition of electrical signals from all sensors was developed to allow dosing in a controlled manner the sodium hypochlorite, all this process is carried out depending on the values obtained by the sensors. The LoRa communication protocol was used in which it will consist of a transmitting node and a receiving node, for this, the receiving node located in the parish center which allows uploading the data to the local web server and through a graphical interface visualize in time real all the parameters sent from the sensors. In addition, the transmitter node consists of an LCD screen which shows the parameters of the sensors. Thus allowing the correct dosage of drinking water with a high level of purification that prevents the spread of diseases derived from ingesting contaminated water, in addition to facilitating the control and optimal operation of the plant since with this prototype it allows monitoring the industrial variables in the parish council.