Estudio de peligro sísmico determinista para las estructuras de Ambato sector la Universal ubicado entre las calles Bolivariana, Hipócrates, Jenofonte, Horacio, Real Audiencia y Pitágoras
No Thumbnail Available
Date
2019
Authors
Journal Title
Journal ISSN
Volume Title
Publisher
Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica. Carrera de Ingeniería Civil
Abstract
The present experimental work has been made with the purpose to evaluate the seismic
danger existing at the area “La Universal” from Ambato city, through the method
deterministic seismic danger.
For the develop of the investigation the tectonic regime was define based on the area in
analysis, was selected faults nearest and active to the study area, also was made the
Standard Penetration Test (SPT), this test was done on five points of the area with the
purpose to get kind of existing soil and through this information it was calculated the
cutting wave speed (Vs30) to determinate the soil profile with the table provides by
NEC-2015. Similarly, through the method of Wells- Coppersmith was calculate the
Magnitude of the Moment Weight (Mw) for all failure selected, and through prediction
equations of soil movement, we proceeded to calculate acceleration spectra for each
fault, using an envelope, from that was determined a specific spectrum for the area, the
same that is compared with NEC-2015. The determine spectrum generates greater
accelerations with regard stablished spectrum in the NEC-2015 in a period 0.15 to 0.4
seconds, that established that structures will be affected, It determines that the spectrum
influences to the structures that are in the area, through the investigation, was
determined that structures under five floors, have more seismic threat.
Description
El presente trabajo experimental se realizó con la finalidad de evaluar el peligro sísmico
existente para el sector LA UNIVERSAL de la ciudad de Ambato, mediante el método
de peligrosidad sísmica determinístico.
Para el desarrollo de la investigación se definió el régimen tectónico en base a la zona
en análisis, se seleccionó las fallas más cercanas y activas a la zona de estudio, además
se realizó el Ensayo de Penetración Estándar (SPT), este ensayo se ejecutó en 5 puntos
del sector con la finalidad de obtener el tipo de suelo existente en el mismo, y mediante
estos datos obtenidos se calculó la velocidad de onda de corte (Vs30) para establecer el
tipo de perfil del suelo mediante la tabla que nos proporciona la NEC-2015. De igual
forma mediante el método de Wells – Coppersmith se calculó la Magnitud de Momento
(Mw) para cada falla seleccionada, y mediante Ecuaciones de Predicción de
Movimiento del Suelo se procedió a calcular espectros de aceleración para cada falla,
utilizando una envolvente, de la cual se precede a determinar un espectro específico
determinista para el sector, el mismo que es comparado con la NEC-2015. El espectro
determinista obtenido genera mayores aceleraciones con respecto al espectro
establecido en la NEC-2015 en un periodo 0.15 a 0.4 segundos, lo que se establece que
las estructuras que se encuentra dentro de este periodo se ven afectadas
significativamente. Lo cual se determina que él espectro determinista influye a las
estructuras que se encuentra en esta zona, ya que mediante la investigación realizada se
establece que estructuras menores a 5 pisos son las que tienen mayor amenaza sísmica.
Keywords
FALLA INVERSA, ANÁLISIS DE PELIGROSIDAD, TERREMOTOS LIGADOS, TERREMOTOS TECTÓNICOS, TERREMOTOS VOLCÁNICOS, FALLAS GEOLÓGICAS, FALLA INVERSA, PELIGROSIDAD SÍSMICA, SISMICIDAD, ECUACIONES DE ATENUACIÓN, PLACAS DE COLISIÓN, BORDES CONVERGENTES