Ciencia e Ingeniería en Alimentos y Biotecnología
URI permanente para esta comunidadhttp://repositorio.uta.edu.ec/handle/123456789/412
Examinar
5 resultados
Resultados de la búsqueda
Item type:Ítem, Evaluación de la biodegradación y propiedades mecánicas de diferentes formulaciones de bioplástico obtenidas a partir del aprovechamiento de colágeno residual y almidón de papa (Solanum tuberosum)(Universidad Técnica de Ambato. Facultad de Ciencia e Ingeniería en Alimentos y Biotecnología. Carrera de Biotecnología, 2024-08) ;Miquinga Lasluisa, Cinthya AlejandraFlores Tapia, Nelly EstherPlastic pollution is one of the most critical problems we face, as the population continues to prefer this material for its versatility in daily life. However, the accumulation of plastics causes serious problems in terrestrial and marine ecosystems, affecting all beings that inhabit them. In addition, poor waste management has similar repercussions. This study focused on evaluating the biodegradation and mechanical properties of a bioplastic made from biopolymers recovered from organic waste, such as starch and collagen. For the production of bioplastics, collagen and starch were extracted by thermal hydrolysis and the wet method. Different formulations were used, varying the concentrations of starch and collagen, and two plasticizers were used: polyvinyl alcohol and glycerin. The aim was to develop a rapidly degrading material with optimal mechanical strength characteristics. It was determined that the most efficient collagen extraction was achieved at 120 minutes, with the highest yield. The presence of glycerin increased the flexibility of the sheets, while polyvinyl alcohol gave them more rigidity. The sample with a 1:1 ratio of flesh collagen showed higher tensile strength compared to the others. In biodegradation tests, faster decay was observed in water than on land; On land, the sheets with flesh collagen degraded more quickly. Therefore, it can be deduced that sheets made with flesh collagen and wet blue have optimal characteristics for the manufacture of bioplastics.Item type:Ítem, Caracterización de la nanoestructura superficial, la absorción espectrofotométrica y las propiedades elásticas macroscópicas de películas compuestas de almidón de maíz (Zea mays L.) y colágeno(Universidad Técnica de Ambato. Facultad de Ciencia e Ingeniería en Alimentos y Biotecnología. Carrera de Biotecnología, 2024-08) ;Caluña Panimboza, Erika EstefaniaCasado Rojo, SantiagoIn view of the growing global concern about plastic pollution, the United Nations seeks to significantly reduce waste generation by 2030 by promoting the production of bioplastics as a highly viable solution. The objective of this research was to characterize the surface nanostructure and physicochemical properties of films composed of corn starch (Zea mays L.) and collagen. For this purpose, films composed of corn starch and collagen were prepared at different concentrations. The addition of 1 percent (mass over volume) collagen to films composed of 5 percent starch and 1 percent glycerol significantly improved the mechanical and optical properties. ATR-FTIR tests revealed good molecular integration, and UV Visible spectrophotometry indicated a decrease in opacity in films with higher collagen content. Optical and atomic force microscopy (AFM) images demonstrated a dense, structured and homogeneous fibrous network in the collagen-containing films. Moisture and solubility analysis showed an increase at higher collagen concentrations, due to its hygroscopic nature. Elastic properties indicated that the formulation with 1 percent collagen offered the best balance between tensile strength (TS), elongation at break (EB) and elastic modulus (EM). The improvement in mechanical properties, coupled with nanoscopic characterization, offers an in-depth understanding of how components and structure affect material performance, opening new possibilities for designing bioplastics with specific propertiesItem type:Ítem, Desarrollo de un bioplástico a partir de harina de maíz negro (Zea mays L.)(Universidad Técnica de Ambato. Facultad de Ciencia e Ingeniería en Alimentos y Biotecnología. Carrera de Alimentos, 2024-02) ;Vargas Vivanco, María BelénMoreno Toasa, Gabriel AlejandroThe present research project aims to develop from black corn flour (Zea mays L.) to offer to the industry innovative bioproducts based on the reduction of the environmental impact in situ that synthetic plastics do not. The experimental design determined that it is possible to produce bioplastics and that they have good physical, mechanical, optical and biodegradation characteristics to similar conventional synthetic plastics (black plant transplant sleeves) based on low density polyethylene (LDPE). The results obtained in the different analyses show that the bioplastics have a thickness of 0.5 mm, moisture content of 15 percent, resistance to deformation of 26 N, water vapor permeability of approximately 1 gram, millimeters, hours to minus one, centimeters to minus 2, pascals to minus 1, solubility of 18 percent, water resistance of 48 hours, high luminosity and brightness, transparency of 26 percent and high biodegradation in less than 30 days. On the other hand, the development of bioplastics from black corn flour on an industrial scale does not require special machinery, due to the use of plastic molds, and temperature for drying. Finally, bioplastics are shown to be an ecological alternative to reduce the excessive plastic waste pollution existing on our planet.Item type:Ítem, Biomateriales obtenidos por fermentación para su aplicación como envase y empaque de productos cárnicos crudos(Universidad Técnica de Ambato. Facultad de Ciencia e Ingeniería en Alimentos y Biotecnología. Carrera de Ingeniería en Alimentos, 2022-03) ;Sampedro González, Tatiana SamanthaChico Terán, Mayra FernandaPlastic pollution is bringing major environmental problems in different areas. Among the main demanders of synthetic plastic is the industry of containers and packaging used for food packaging. There has been a great interest from researchers and industries to replace common plastic with bioplastics and biomaterials derived from renewable resources. The objective of this research is to perform a bibliographic review of the biomaterials obtained by fermentation for their application as containers and packaging for raw meat products. Biomaterials certified as biodegradable and biobased can be obtained directly from residual biomass from agroindustrial processes through fermentation by microorganisms, thus economizing the production process. The major representatives of bio-based and biodegradable biopolymers are PLA (polylactic acid) and PHB (polyhydroxybutyrate) because they have physical, chemical and mechanical properties similar to the synthetic plastics used in the packaging of raw meat. These biomaterials are obtained by fermentation by bacteria using different carbon sources such as corn, molasses or sugar cane bagasse, whey, fruit peel, among others. These foods are perishable and easily spoiled due to their high water and nutrient content. The use of PLA and PHB films is a viable alternative to respond to one of the biggest challenges in the food industry, which is the extension of shelf life while maintaining the microbiological and sensory quality of meats, since these packages can provide antioxidant and antimicrobial properties to the product.Item type:Ítem, Caracterización de bacterias productoras de polihidroxialcanoatos (PHA) utilizando azúcares presentes en residuos agroindustriales(Universidad Técnica de Ambato. Facultad de Ciencia e Ingeniería en Alimentos. Carrera de Ingeniería Bioquímica, 2018-11) ;Llumigusín Jácome, Darwin RobertoLópez Hernández, Orestes DaríoThe low-cost production of polyhydroxyalkanoates has been a current challenge for the biological world. The present work has identified a strain that has not yet been reported with production capacity of said biopolymer, Citrobacter freundii. This pathogenic bacterium commonly present in water, soil or even in the intestines of animals, can metabolize different sugars such as lactose, citrate or alcohols such as glycerol. In this study, the substrates for said bacteria have been: lactose and xylose (sugars present in agroindustry residues as in the whey of milk or in the bagasse of rice, corn etc., respectively). The specific growth rates are: 0.6009 and 0.6175h-1 respectively and the consumption of sugar for 24 hours, has been around 5 grams for every liter. The concentrations of PHA accumulated were evaluated at 48 and 72 hours, being at 48 hours, the highest peaks, reaching between 25 to 28 grams for every liter. One way to verify that this species produces the biopolymer, was identifying the gene PHA synthase in its genome, which is responsible for producing said biopolymer, analysis made in silico,obtaining 80 percent of the gene to be compared that corresponds to the PHA synthase.
