Ingeniería en Sistemas, Electrónica e Industrial

URI permanente para esta comunidadhttp://repositorio.uta.edu.ec/handle/123456789/1

Examinar

Resultados de la búsqueda

Mostrando 1 - 10 de 10
  • Item type:Ítem,
    Metodología Six Sigma para la reducción de desperdicios y residuos en el proceso de envasado en la empresa Pura Crema
    (Universidad Técnica de Ambato. Facultad de Ingeniería en Sistemas Electrónica e Industrial. Carrera de Ingeniería Industrial., 2026-01)
    Silva Torres, Sebastián Euclides
    ;
    Morales Perrazo, Luis Alberto
    ;
    Universidad Técnica de Ambato. Facultad de Ingeniería en Sistemas Electrónica e Industrial. Carrera de Ingeniería Industrial.
    Waste in packaging processes within the food industry generates inefficiencies and economic losses, mainly due to filling variations, packaging failures, equipment instability, and operational errors. These factors increase waste and affect product quality; therefore, this study aimed to reduce the waste generated in the yogurt packaging process at the company Pura Crema, located in the San Pedro de Pelileo canton, Tungurahua province. A quantitative methodology was applied through the implementation of the DMAIC cycle within a Six Sigma project, supported by tools such as ABC analysis, statistical control charts, Failure Mode and Effects Analysis (FMEA), cause-and-effect diagrams, and the 5W and 2H technique. This approach made it possible to prioritize defects and accurately assess the capability of the yogurt packaging process. The results revealed that the critical CTQs are the filling level and bottle deformation in the packaging process. Although the process is stable, its inability to ensure uniform filling and properly formed containers increases the number of defects. The root cause analysis showed that these deviations stem from a lack of process standardization, personnel distraction, and instability in temperature control during the blowing stage, thereby limiting the process capability to remain within the established quality parameters. Finally, it is concluded that the process presents a Sigma Level of 0.67 for the overflow defect, equivalent to 250,000 PPM, which implies significant economic losses. Therefore, the main opportunity for improvement lies in the implementation of standardized protocols and operational controls that allow progress toward a competitive Sigma level and mitigate process variability.
  • Item type:Ítem,
    Control de calidad en la línea de producción de cuero de la empresa Curtiduría Promepell S.A.
    (2025-07)
    Moposita Jijón María del Cisne
    ;
    Escobar Naranjo Juan Camilo
    ;
    Universidad Técnica de Ambato. Facultad de Ingeniería en Sistemas, Electrónica e Industrial. Carrera de Ingeniería Industrial
    The present study is based on the analysis of the quality of the leather production line of the company Promepell S.A., located in the province of Tungurahua. For this purpose, a quantitative and descriptive methodology was used, which included data collection through check sheets, statistical analysis of the process, evaluation of the capacity through Cp indexes, as well as R&R studies to determine the reliability of the measurement system. During the diagnosis, the main defects affecting the quality of the finished leather were identified as: thickness irregularities, incorrect shades and grain looseness. These defects not only occur with high frequency, but are also repeated on a constant monthly basis, according to internal records and validation by the management team. Process capability indices revealed that several critical steps, such as trimming and finishing, have Cp levels of less than 1, reflecting excessive variability that compromises product conformity. As a result, an improvement programme is proposed based on actions such as parameter standardisation, incorporation of digital measurement technology, partial process automation and continuous staff training. In conclusion, the research shows that poor quality control has a direct impact on the company's competitiveness. The implementation of systematic improvements will not only reduce defects and increase efficiency, but also strengthen the positioning of Promepell S.A. in the regional leather industry, characterised by its demanding quality standards.
  • Item type:Ítem,
    Optimización del sistema de gestión de almacenes en la empresa textil Texcodi
    (Universidad Técnica de Ambato. Facultad de Ingeniería en Sistemas, Electrónica e Industrial. Carrera de Ingeniería Industrial, 2025-02)
    Medina Riofrio Jonathan Daniel
    ;
    Ortiz Sailema Christian Ismael
    The project addresses the optimization of the warehouse management system at TEXCODI, a textile company facing logistical inefficiencies due to problems such as lack of inventory control, inadequate distribution of areas, lack of logistical indicators, and the existence of obsolete inventory. These issues lead to delays in deliveries, accumulation of obsolete inventories, and economic losses. Using the IPISI methodology (Infrastructure, Processes, Inventories, Safety, and Indicators) and the 5W1H analysis, a comprehensive diagnosis of current operations was conducted. Critical areas were identified, such as the cutting, sewing, and packaging zones, where staff movement times generate operational inefficiency. Moreover, the lack of an automated system limits inventory visibility and traceability. The central proposal includes the reorganization of the warehouse to optimize accessibility and workflow, as well as the implementation of automated software that allows real-time monitoring of inventory status and demand forecasting. The results of the proposals reflect a possible 20% reduction in operation times, an improvement in inventory accuracy, and a 15% decrease in logistics costs.
  • Item type:Ítem,
    Análisis estadístico de la calidad en los procesos de inyección de plástico de la empresa Ecuatoriana de Matricería Ecuamatriz Cía. Ltda.
    (Universidad Técnica de Ambato. Facultad de Ingeniería en Sistemas, Electrónica e Industrial. Carrera de Ingeniería Industrial, 2024-08)
    Pazmiño Lizano, Miguel Ricardo
    ;
    Morales Perrazo, Luis Alberto
    The suboptimal quality control in the plastic injection process engenders a 3% loss due to defects such as incomplete, marbled, and deformed parts at ECUAMATRIZ Cía. Ltda. This directly translates into diminished product reliability and potentially dissatisfied clientele. To address this impact, a statistical analysis of quality in this process was developed. A quantitative and descriptive approach based on Six Sigma and DMAIC (Define, Measure, Analyze, Improve, and Control) was employed. For definition, data was collected through records and Pareto diagrams. For measurement, 100% sampling, R&R studies, and control charts were utilized. The analysis identified root causes using Ishikawa diagrams and the 5 Whys method. For improvement and control, the FMEA matrix was implemented, determining the most significant root cause and developing proposals with experienced personnel. The analysis of P control charts for attributes revealed unstable processes for marbling (5.5%), incomplete parts (0%), and deformation (2.7%), with sigma levels of 1.99, 2.06, and 2.64 respectively, evidencing deficient statistical control and high variability. The root causes were identified as lack of preventive maintenance, absence of records and control of critical parameters (temperature, pressure, injection speed, among others), lack of cleaning procedures, and insufficient personnel training. It was concluded that the plastic injection process exhibits a low level of quality and control, operating below globally required standards, representing an annual loss of 1.98% in terms of defects, reprocessing, and waste.
  • Item type:Ítem,
    Variabilidad estadística en la producción del cuero de la empresa Curtiembre Quisapincha
    (Universidad Técnica de Ambato. Facultad de Ingeniería en Sistemas, Electrónica e Industrial. Carrera de Ingeniería Industrial, 2024-08)
    Chuquiana Tamaquiza, Edison Israel
    ;
    Morales Perrazo, Luis Alberto
    The scarce quality control in the tanning industry represents a problem for small and medium-sized companies. In this sense, the research focused on determining the statistical variability present in the leather production processes in the company CURTIEMBRE QUISAPINCHA. The study was carried out using the Six Sigma and DMAIC (Define, Measure, Analyze, Improve and Control) methodologies. In the define phase, data collection techniques such as observation sheets and Pareto diagrams were used. In the measure phase, process variability was determined by using tools such as R&R tests, control charts and capability indices. The analysis was determined by means of the 5-whys and Ishikawa diagrams and finally, in the improvement stage, the 5W-2H tool and the 6 quality m's were used to establish a quality control proposal. The results obtained showed that the defects of "tears or breakage", "different thickness", "scratches" and "holes", are the main problems that cause variability in production, due to causes such as lack of technological innovation, little or inefficient training in the use of machinery or work methods, personnel turnover, for this same reason the sigma level of the company is 2.53, being this value below the desired sigma level (6σ) for the leather industrial sector. It is concluded that the company with the sigma levels mentioned above generates an average of 155,000 defects per million produced, which we are seeking to reduce to 3.4 defects per million opportunities and place the company as world class.
  • Item type:Ítem,
    Análisis de la variabilidad en los procesos productivos en la empresa de calzado Pool Sport mediante la metodología Six Sigma
    (Universidad Técnica de Ambato. Facultad de Ingeniería en Sistemas, Electrónica e Industrial. Carrera de Ingeniería Industrial, 2024-08)
    Montenegro Rodríguez, Bryan Santiago
    ;
    López Flores, Mauricio Xavier
    The research project focuses on analyzing the variability present in the production processes at POOL SPORT, with the objective of proposing an action program to reduce defects using Six Sigma tools and methodologies. These are presented in a list designed to identify the main improvement alternatives, aimed at addressing critical issues, thereby reducing defects in the operational area, decreasing variability, improving the quality of the final product, and increasing customer satisfaction. Through bibliographic-documentary research, field research, and applied research, all the information and data were collected, including the historical sales data for the period (July - December 2023). An ABC analysis was performed, allowing the identification of the most profitable product. Based on this model, information was gathered, followed by the creation of process diagrams to understand the current situation of the company and the current working method employed at the facilities. Tools such as interviews and Pareto diagrams were used to identify defects in the operational area, such as: unstitched pieces 26%, adhesive stains 20.9%, pieces with cutting defects 13.2%, poorly stitched labels 12.4%, irregular cuts 10.9%, loose seams 5.8%, incorrect soles 5.8%, and defective stamping 5.0%. These defects were associated with factors related to labor and raw materials identified through cause-and-effect analysis and the FMEA matrix. Once the critical processes (stitching and sole attachment) and potential defects (adhesive stains and unstitched pieces) were identified, with quality levels for the processes at 2.46σ and 2.70σ respectively, as well as Yield efficiencies of 83.1% and 88.5% respectively, the negative situation of the processes was exposed. Finally, improvement proposals based on the DMAI analysis were developed, where alternatives were established that should be maintained over time through the records and programs outlined in the Control (C) stage.
  • Item type:Ítem,
    La calidad fitosanitaria en las flores de exportación de la empresa Sisa Green Flowers
    (Universidad Técnica de Ambato. Facultad de Ingeniería en Sistemas, Electrónica e Industrial. Carrera de Ingeniería Industrial, 2024-08)
    Changoluisa Calapaqui, Francis Alfonso
    ;
    Morales Perrazo, Luis Alberto
    Phytosanitary quality control in export products is fundamental to ensure customer satisfaction and product quality, therefore, this research focused on evaluating the performance of quality control during lot inspection at SISA GREEN FLOWERS. The research applied the DMAIC (Define, Measure, Analyze, Improve and Control) methodology with a quantitative approach to address the quality problem. The problem was defined using Pareto diagrams, brainstorming and flow charts. Measurement developed systematic sampling to generate 135 subgroups to develop control charts of critical variables. The analysis used Ishikawa diagrams and 5W technique. Finally, the proposed improvement seeks to solve the root cause of defective product acceptance. Quality defects were analyzed using critical quality variables (CTQ's). Consequently, the results of the study show that the defect "presence of mites" presents problems with the variable "compliance with phytosanitary protocols for mites" because it showed a level of 0.6291 sigma. The defect "affections by thrips" was evaluated integrally, obtaining 0.7067 sigma. As for defects related to "stem deterioration", the variable "stem appearance" was identified as having a level of 0.7204 sigma. All variables generate out-of-specification products. Finally, the quality level turns out to be very low, affecting the company's reputation and generating possible significant financial losses, estimated at around $4137,13 for each shipment of products to customers abroad.
  • Item type:Ítem,
    Control de calidad en los procesos de confección de ropa interior de la corporación Impactex Cía. Ltda.
    (Universidad Técnica de Ambato. Facultad de Ingeniería en Sistemas, Electrónica e Industrial. Carrera de Ingeniería Industrial, 2024-02)
    Manobanda Chuquicondor, Ángel Darío
    ;
    Morales Perrazo, Luis Alberto
    El bajo control de calidad en la confección de ropa interior genera grandes pérdidas económicas para las empresas de esta rama productiva, por lo cual, la investigación se centró en evaluar el desempeño de control de calidad en los procesos de confección de ropa interior de la Corporación Impactex Cía. Ltda. El estudio utilizó una investigación descriptiva y un enfoque cuantitativo basado en la metodología Six Sigma y su herramienta DMAIC (Definir, Medir, Analizar, Mejorar y Controlar). En la fase de definir, se empleó técnicas como lluvia de ideas, 5W-2H y diagrama de Pareto. La etapa de medir implementó un muestreo sistemático del 100% de los productos en un periodo de 15 días. El análisis se realizó mediante el diagrama de Ishikawa, los 5 por qué y el AMEF. Y finalmente, en la fase de mejora se utilizó la herramienta 5W-1H para la propuesta de control. Los resultados arrojan que los defectos de "fallas de costura" y "manchas de aceite" son los principales responsables de ocasionar variabilidad en la producción (49,7% y 25,2%, respectivamente). Esto se atribuyó a la falta de capacitación en técnicas de costura, rotación frecuente del personal, carencia de mantenimiento preventivo en las máquinas de coser y ausencia de protocolos de limpieza. Además, el análisis Six Sigma reveló que el proceso está fuera de control estadístico, con 36151 PPM fuera de especificaciones y un nivel sigma de 1,8 para fallas de costura, y 5837 PPM fuera de especificaciones con un nivel sigma de 2,52 para manchas de aceite. Se concluye que el proceso de confección de ropa interior presenta un bajo control estadístico de calidad en su confección, debido a que el nivel sigma actual de la empresa está por debajo de lo recomendado para la industria textil que deberían estar de 3 a 4 sigmas.
  • Item type:Ítem,
    Análisis Six Sigma en el proceso de montaje de la empresa calzado GAMOS
    (Universidad Técnica de Ambato. Facultad de Ingeniería en Sistemas, Electrónica e Industrial. Carrera de Ingeniería Industrial en Procesos de Automatización, 2023-03)
    Gavilanez Gavilanez, Juan Carlos
    ;
    Morales Perrazo, Luis Alberto
    The footwear assembly process is the most important operation in the manufacture of shoes, since its objective is to assemble the cut on the last and the insole, put counters and assemble tips, sides and heels; however, it is a potential source of defects and problems that cause a high variability in the production method; therefore, the present research aims to perform a six sigma analysis in the assembly process of the company GAMOS Footwear. The research has a quali-quantitative approach, which is based on the use of the DMAIC (Define, Measure, Analyze, Improve and Control) methodology; to carry out the study, the data are collected in a period of approximately one month, through a systematic random sampling of 20 production orders received, in the footwear model with the highest demand. The results obtained show that the defect of "unstuck edges" is the most responsible for production errors (53%), which is mainly due to the presence of attributable causes such as: carding dust in the air, poorly carded sides, loose or poorly glued sides to the last, continuous rotation of operators, too much workload and poor assembly of the shoe upper. The six sigma analysis determines that the process is out of statistical control, as it has 4237 PPM out of specification, which indicates a process yield of 93% denoting a sigma level of 2.96 sigmas. It is concluded that the assembly process of the company under study presents a low statistical control in the production of its products, since it presents a sigma level below the average of the footwear companies (3 to 4 sigmas).
  • Item type:Ítem,
    Plan de mejora de la calidad en la producción de calzado en Creaciones Mabeliz mediante la aplicación de la metodología six sigma
    (Universidad Técnica de Ambato. Facultad de Ingeniería en Sistemas, Electrónica e Industrial. Carrera de Ingeniería Industrial en Procesos de Automatización, 2015-10)
    Urrutia Sánchez, Ángel Iván
    ;
    Aldás Salazar, Darwin Santiago
    En la presente investigación se aplicaron herramientas para la medición, análisis y control del nivel de la calidad en la producción de botas y botines para damas. El estudio partió de la definición del problema a solucionar y se orientó a establecer mejoras que aporten significativamente en el desempeño de los procesos, con sustento en la aplicación de la metodología Six Sigma y el DMAIC. Como complemento al estudio de la calidad también se establecieron los parámetros para la medición y análisis del grado de satisfacción de los clientes internos y externos del servicio ofertado por la empresa. El estudio de la situación actual se llevó a efecto por cada proceso y se pudo concluir que el nivel de la calidad del calzado es deficiente, hecho que se evidencia en la presencia de defectos y de unidades defectuosas en la cadena productiva, en ambos casos medidos por atributos, para la medición se emplearon indicadores como el nivel sigma σ, los DPMO, el NPR, la capacidad del proceso y los límites de control a través de las cartas de la proporción de unidades defectuosas p y número de defectos por unidad u. El nivel sigma actualmente se ubica en 3,18σ que corresponde a una eficiencia del 95,32% y para una media de 46460 DPMO, considerando que el nivel óptimo es 6σ se justifica la realización de una propuesta para mejorar la calidad.