Ingeniería en Sistemas, Electrónica e Industrial
URI permanente para esta comunidadhttp://repositorio.uta.edu.ec/handle/123456789/1
Examinar
7 resultados
Resultados de la búsqueda
Item type:Ítem, Desarrollo de un sistema web para automatizar los procesos de gestión de inventarios en la Dirección Nacional de Investigación Técnico Científica Policial(Universidad Técnica de Ambato. Facultad de Ingeniería en Sistemas Electrónica e Industrial. Carrera de Software., 2026-01) ;Zerna Ramos, Luis Fernando ;Ibarra Torres, Oscar FernandoUniversidad Técnica de Ambato. Facultad de Ingeniería en Sistemas Electrónica e Industrial. Carrera de Software.Manual processes related to inventory management at the National Directorate of Technical-Scientific Police Investigation affect the proper performance and workload of the warehouse personnel. Data compilation and report generation are impacted by the reliance on these manual procedures, leading to delays, information loss, disorganization, and inaccuracies. To address this issue, an inventory management system was developed and implemented to optimize the execution time of these manual processes and reduce human error associated with non-automated workflows. This solution improves operational performance and streamlines process completion times. The development followed an agile methodology known as Extreme Programming (XP). The technologies used include React and Node.js within a hexagonal architecture to ensure system scalability and maintainability, MySQL as the database, and TypeScript as the programming language. Requirements were gathered following the IEEE 830 standard. The implementation of this system reduced the completion time of key processes such as inventory management, reporting, supply location, and information tracking. The average time reduction achieved through the system was 73.8%, significantly alleviating the operational workload of warehouse staff at the National Directorate of Technical-Scientific Police Investigation. The system is designed for scalability and maintainability based on user needs.Item type:Ítem, Diseño de un sistema de gestión según la Norma Iso/Iec 17025:2018 para el laboratorio de control de calidad de agua potable del Gad Pelileo(Universidad Técnica de Ambato. Facultad de Ingeniería en Sistemas Electrónica e Industrial. Carrera de Ingeniería Industrial., 2026-01) ;Lucas Loor, Angie Elizabeth ;Ureña Aguirre, Jeanette del PilarUniversidad Técnica de Ambato. Facultad de Ingeniería en Sistemas Electrónica e Industrial. Carrera de Ingeniería Industrial.The reliability of the results issued by quality control laboratories is essential for protecting public health and ensuring proper water resource management. To guarantee this reliability, implementing a management system under the NTE INEN-ISO/IEC 17025:2018 standard is an effective strategy for standardizing laboratory activities and ensuring the quality of tests and calibrations. Therefore, the objective of this research was to design a quality management system aligned with the requirements established by the standard for the GAD Pelileo Drinking Water Quality Control Laboratory. This study was developed using a bibliographic, applied, and field approach. The applied research allowed procedures and records to be structured according to the requirements of the standard; the document review facilitated the regulatory analysis and the development of the theoretical framework; and the fieldwork facilitated the assessment of the laboratory's initial situation. The initial diagnosis was based on the SAE self-assessment questionnaire, which considers the requirements of NTE INEN – ISO/IEC 17025:2018, as well as the identification of the laboratory's current processes and operational needs. Based on the results obtained, a quality manual, procedures manual, process characterization, risk matrix, and process map were designed, comprising a total of 9 processes and 26 procedures, which establish the necessary guidelines to improve the technical competence of the laboratory in line with the requirements established by the standard.Item type:Ítem, Gestión de riesgos físicos y mecánicos en la Curtiduría Hidalgo de la ciudad de Ambato(Universidad Técnica de Ambato. Facultad de Ingeniería en Sistemas, Electrónica e Industrial. Carrera de Ingeniería Industrial, 2025-02) ;Toalombo Eugenio Hernán IsmaelJordán Hidalgo Edisson PatricioSafety laws and regulations are applied in all business environments with the main objective of protecting people who are the most valuable resource of the company and carry out work activities under risky conditions. The Hidalgo Tannery, a company dedicated to the production of leather, has few plans, requirements and technical documents that address the risk factors necessary to prevent or reduce accidents and physical damage in the workplace. The poor training of workers in safety measures, their overconfidence when carrying out their tasks and lack of knowledge about the correct use of personal protective equipment are some of the causes that have generated the presence of risks in the company. Through the research carried out, it was proposed as a solution to the problem to propose an industrial safety technical management plan based on the independent study and analysis of the work areas and considering the regulations currently established within the national statutes and regulations. The most critical risks were identified in the production area, with mechanical risks being the most serious, and it was detected that noise levels exceed the permitted limit (85dBA) in workplaces such as hairdressing, fleshing, dividing, tanning, softened, pigmented and ironed. Furthermore, factors such as the lack of signage, disorder, the absence of training and the lack of prevention plans aggravate the levels of occupational risk in the company.Item type:Ítem, Diseño de un sistema de gestión en base a la orma NTE INEN-ISO/IEC 17025:2018 para el laboratorio de control de calidad en la empresa Holviplas S.A.(Universidad Técnica de Ambato. Facultad de Ingeniería en Sistemas, Electrónica e Industrial. Carrera de Ingeniería Industrial, 2025-02) ;Tamayo Mejia Kevin AlejandroUreña Aguirre Jeanette del PilarNowadays, laboratories must guarantee the reliability of their test results to ensure product quality. An effective way to achieve this is to implement a management system based on the NTE INEN-ISO/IEC 17025:2018 standard. The objective of this degree work was to design a management system aligned to this standard for the quality control laboratory of HOLVIPLAS S.A., which allowed managing the activities and assuring the tests. The project is based on applied, documentary and field research; it is applied because the processes necessary to standardize the activities were documented; documentary, because the bibliographic information was systematized for the diagnosis and development of the project; and field research, due to the direct collection of information by the researcher. The process began with the identification of the problem and the definition of the objectives, followed by the investigation of the normative and theoretical bases for the design of the system. In the initial analysis, the compliance self-assessment questionnaire provided by SAE, in accordance with NTE INEN-ISO/IEC 17025:2018, was used, along with general laboratory information, which provided a basis for the project proposal. Finally, a quality manual, process map, procedures manual, risk management matrix and process characterization were developed, comprising 9 processes and 30 procedures, which made it possible to comply with the requirements established in the standard.Item type:Ítem, Sistema de gestión por procesos en la microempresa “Productos de caucho León de Judá”(Universidad Técnica de Ambato. Facultad de Ingeniería en Sistemas, Electrónica e Industrial. Carrera de Ingeniería Industrial, 2023-03) ;Morales Oña, Anthony IsraelTubón Núñez, EdithThe objective of the study was to develop a process management system in the microenterprise "Products of Rubber Lion of Judá" for the manufacturing process of carpet of car. Techniques were applied in order to collect information such as: semistructured interview, survey validated by 5 experts, on-site visits and observation, these allowed to diagnose and understand the current situation regarding process management, obtaining that the empirical management gives rise to multiple problems, so that the organization has a high need to implement internal improvements that allow its proper functioning to achieve greater competitiveness and therefore customer satisfaction. In the proposal, a process map was made from which the production process was disaggregated, allowing its characterization, but also the strategic and support processes were characterized in order to evaluate their level of criticality by means of an observation sheet that combines quality principles of the ISO 9001 standard with a statistical approach through the Likert scale evaluating 4 fields. On the other hand, in order to standardize the production process, the standard times for the production of carpets of cars, were obtained for each production sub-process and based on these, the process and procedure manual was prepared, including policies, objectives, guidelines, Kanban cards, electronic records and key performance indicators, where its implementation seeks to eliminate the dependence of the most experienced operator by being a clear and coherent guide that facilitates training, guarantees the uniformity of the products and can be followed up on the production processes, operators and resources. In addition, in order to document the improvements and evidence the evolution of its processes, a format with stages of the Deming methodology was proposed with tools such as the 5 Why's and the Ishikawa diagram in order to serve as support to find the root cause of the problem to be solved, through collaborative meetings including operational staff, however the implementation of the system will require a time of adaptation for both the administrative and operational part and thus achieve an organizational culture of excellence.Item type:Ítem, Desarrollo de un sistema de gestión de calidad basado en la ISO 9001:2015 para mejorar la producción de una empresa de calzado(Universidad Técnica de Ambato. Facultad de Ingeniería en Sistemas, Electrónica e Industrial. Maestría en Producción y Operaciones Industriales, 2021) ;López Vargas, Wilson OswaldoMariño Rivera, Christian JoséIndustrial development and shoe's market competitiveness have induced companies to implement quality systems for improving their processes. For this reason, Messi shoe's company which doesn't have its processes standardized, has seen the need to improve its production process to be more competitive in the market with quality products. The study objective is to develop a Quality Management System based on ISO 9001:2015 to improve production. Maturity level matrix, standard requirements and a statistical analysis were used for maintaining the production process under controlled conditions. The current maturity level is evaluated relative to the seven quality principles with a value of 2.47 in a system that should improve the processes towards the client, the implementation level of the standard with a low overall rating of 12%. Subsequently, quality management system is developed to meet all the requirements of the standard. A quality manual with procedures and instructions is developed, with emphasis on production control and non-conforming outputs in which quality criteria are defined. In this context, statistical quality control is proposed with an ideal double sampling plan, the use of run charts, Pareto diagram, p and np control charts, 4 monitoring indicators are proposed: quality index by defects kind, accepted lots, rejects per batch and reject production index. Results show descriptively an implementation level of 68.13% and a maturity level of 3.53 with a system that meets the needs and expectations of customers.Item type:Ítem, Sistema de gestión ambiental basado en la Norma ISO 14001:2015 para el Hospital Privado Tungurahua S.A.(Universidad Técnica de Ambato. Facultad de Ingeniería en Sistemas, Electrónica e Industrial. Carrera de Ingeniería Industrial en Procesos de Automatización, 2021-08) ;Ávila Velastegui, José LuisJordán Hidalgo, Edisson PatricioThe lack of environmental regulations which regulate the activities that present considerable levels of risk to the environment triggers a series of serious problems in a hospital, among these problems are the generation of hazardous waste, mismanagement of resources, and excessive consumption of supplies by staff, so this research work aims to develop an environmental management system based on ISO 14001:2015 for the private hospital "Tungurahua" S.A. The project is based on a quali-quantitative approach because an initial diagnosis is made through a checklist which allows to determine the level of compliance with the requirements of the standard according to ISO 14001:2015 allowing in turn to identify the documentary needs of the hospital. Similarly, the UNE 150008:2008 standard aims to identify the environmental aspects and impacts that present some level of risk to the environment in which the hospital's activities are carried out. Once the checklist was applied, it was determined that the level of compliance with the standard is 20.92% with respect to its requirements. In addition, with the analysis and evaluation of the environmental risk, it was observed that the scenarios with a moderate level of risk are the generation of hazardous and infectious waste, as well as emissions to water through the sewage system and seismic events that may occur in the locality, among others. It is concluded that the implementation of environmental management system documentation is necessary as it will improve environmental performance and contribute to the financial interests of the hospital.
