Ingeniería en Sistemas, Electrónica e Industrial
URI permanente para esta comunidadhttp://repositorio.uta.edu.ec/handle/123456789/1
Examinar
8 resultados
Resultados de la búsqueda
Item type:Ítem, Riesgos ergonómicos debido a la manipulación manual de cargas de la microempresa “Gemes(Universidad Técnica de Ambato. Facultad de Ingeniería en Sistemas, Electrónica e Industrial. Carrera de Ingeniería Industrial, 2024-02) ;Reina Huera, Lady JulianaUrrutia Urrutia, FernandoThe present research work of the ergonomic evaluation due to manual handling of loads that corresponds to the transport or fastening of a load that generates the appearance of musculoskeletal disorders (MSD) in the personnel of the micro- company "GEMES". The main objective of the research is to manage the risks of manual handling of loads consisting in the identification, estimation, assessment and control of the factors that contribute to the occurrence of hazards. The study begins with the identification of the factors that are present in the production area, using an Ergonomic Checklist proposed by the INSST from which 103 items are taken and used to identify the conditions in which workers are performing their work and also through the risk estimation the risks that affect this area were identified. The research assesses the risk of lifting loads by means of the INSHT Technical Guide that determines the acceptable weight to be lifted by the personnel and it is also evaluated by means of the NIOSH equation that allowed obtaining the Lifting Index (IL) by means of 7 factors that influence lifting; these two methods are the fundamental ones to evaluate the manual lifting activities. The results of the evaluations according to the aforementioned methods show that the tasks performed by the personnel have an unacceptable risk due to heavy loads and forced postures. Therefore, different solutions should be implemented, such as: training of personnel, mechanical aids, medical check-ups, constant risk assessment, etc.Item type:Ítem, Evaluación de posturas ergonómicas en el levantamiento y traslado de cargas en la empresa Gamo´s(Universidad Técnica de Ambato. Facultad de Ingeniería en Sistemas, Electrónica e Industrial. Carrera de Ingeniería Industrial, 2023-09) ;Haro Guamán, Jimmy SantiagoSánchez Rosero, Carlos HumbertoThis research project was developed in the company Calzado GAMO'S located in the province of Tungurahua, where it was determined that the main problem is the manual handling of lifting and moving loads, which when not properly controlled can lead to musculoskeletal disorders affecting the health of workers. Therefore, in order to identify the ergonomic conditions, a survey based on the INSHT MMC (National Institute of Occupational Safety and Hygiene for the Manual Handling of Loads) technical guide was applied, which allowed obtaining ergonomic data regarding the handling of loads and determining the acceptable weight with which they should work, with the objective of reducing the level of risk, this calculation was made for the two areas of study. As a complement, the Nordic questionnaire was used to determine the areas of the body that present discomfort in each of the workers For the assessment of ergonomic risks with respect to the transport of cargo carried out individually or in groups, the MAC (Manual handling Assessment Charts) methodology was used, which allows the assessment of factors such as; the type of grip of the box, transit surface, distance between back and hands, among others. Also continuing with the evaluation of ergonomic risks, the NIOSH (National Institute for Occupational Safety and Health) equation was used, which made it possible to obtain the lifting index together with the level of risk involved. The results obtained indicate that currently both the warehouse and storage areas are at a tolerable and non-tolerable risk level, respectively, and therefore require prompt corrective actions, for which procedures were carried out for lifting and moving loads, as well as a program of active breaks.Item type:Ítem, Riesgos ergonómicos por posturas forzadas en el personal de la empresa Bloqcenter perteneciente al Grupo Industria Metálica Cotopaxi(Universidad Técnica de Ambato. Facultad de Ingeniería en Sistemas, Electrónica e Industrial. Carrera de Ingeniería Industrial, 2023-03) ;Raura Velasco, Jeniffer MaricelaLópez Arboleda, Jessica Paolan the concrete prefabrication industry, palletizing activities have been associated with direct ergonomic risks that could negatively impact the health of workers, ranging from injuries to occupational diseases. In this context, this study aimed to identify and evaluate working conditions that generate ergonomic risks due to forced postures, in order to establish preventive measures that could minimize their effects. The REBA method was applied to assess ergonomic risk due to forced postures, which allowed for the evaluation of the entire body in two groups: Group A, which includes the trunk, neck, and legs, and Group B, which includes the upper limbs, arm, forearm, and wrist. The evaluation was conducted on a total of 12 workers in the finished product palletizing area. The results revealed a predominance of high and very high level risk on both the left and right sides of the body in the activities of placing wooden pallets, accumulating products, and stacking metal boards. Therefore, the development of collaborative and appropriate tools is necessary to minimize the consequences of exposure to ergonomic risks, such as an active pause program and health surveillance and training procedures for workers. These measures could generate a positive impact on the personnel in the palletizing area, creating a healthy and safe work environment for carrying out activities.Item type:Ítem, Riesgos ergonómicos por posturas forzadas y movimientos repetitivos para un sector de la industria de fabricación de bloques en el proceso de prensado(Universidad Técnica de Ambato. Facultad de Ingeniería en Sistemas, Electrónica e Industrial. Carrera de Ingeniería Industrial, 2022-09) ;Toaquiza Ilaquiche, Leonardo JavierUrrutia Urrutia, FernandoThe handmade manufacture of blocks is associated with ergonomic hazards that affect the health of workers, for this reason, the research focused on the identification and assessment of ergonomic risks due to forced postures, repetitive movements and pushing loads for the subsequent presentation of corrective actions. The research was carried out based on the Risk Management methodology applied to 10 artisan blockmakers for which 24 people were involved. After the field visits and the recognition of 3 workstations, and 35 tasks, the ergonomic hazards associated with each task were identified using the cards adapted from the ISO TR 12295:2014 technical report; the estimation using the binary method matrix determined that 74% of the tasks present a moderate risk level, while 26% present a tolerable risk level. The risk assessment for awkward postures using the REBA method showed a prevalence of high risk level, while the risk assessment for repetitive movements using the Check List OCRA method showed a variation of risk level between acceptable and unacceptable high depending on the work organization system. Finally, the level of risk from pushing loads using the method proposed by NOM-036-STPS-1-2018. Appendix II, showed a prevalence of medium possible risk level. The study concludes that there is a need to implement procedures to improve workplace conditions and to train workersItem type:Ítem, Evaluación de riesgos ergonómicos asociados a la confección de jeans en la empresa textil Xavis Jean’s(Universidad Técnica de Ambato. Facultad de Ingeniería en Sistemas, Electrónica e Industrial. Carrera de Ingeniería Industrial en Procesos de Automatización, 2022-09) ;Castro Córdova, Diego IsraelMariño Rivera, Christian JoséThe objective of this research project was to evaluate the ergonomic risks related to the jeans manufacturing process in the textile company Xavis Jean's, with the purpose of obtaining a current vision of the incidence of this type of risks in the organization, In order to obtain a current view of the incidence of this type of risks in the organization, so that they can be detected in a timely way and also act based on the level of risk obtained through the evaluation, for this information was obtained from each of the jobs as the tasks and times in which they perform them through cursograms and profesiograms, an initial assessment of the symptoms associated with the risks of study was applied by means of the Nordic questionnaire, Subsequently, an identification of the hazards to which people are exposed in each of the positions was carried out by means of the Colombian Technical Guide (Matrix GTC 45), an initial evaluation was developed to determine the level of ergonomic risk, carried out by means of the BRIEF/BEST questionnaire whose results influenced the performance of a more specific evaluation to determine the level of ergonomic risk associated with forced postures and repetitive movements by methods such as RULA, REBA and OCRA Check List, providing reliability and confidence to the research and the results obtained. The results revealed the presence of MSD in arms and forearms, being more perceptible mostly in the back, neck and wrists; the findings suggested that none of the postures are acceptable and that there is a prevalence of repetitive movements. Through the research it was possible to conclude that 100% of the positions present risks for which preventive measures should be taken in the work environment and work method, and also that 89% require urgent intervention.Item type:Ítem, Esfuerzo físico laboral y su incidencia en los trastornos musculoesqueléticos de las personas con discapacidad en sus extremidades inferiores(Universidad Técnica de Ambato. Facultad de Ingeniería en Sistemas, Electrónica e Industrial. Dirección de Posgrado. Maestría en Seguridad e Higiene Industrial y Ambiental, 2016) ;López Arboleda, Jéssica PaolaSan Antonio Serrano, Thalía DanielaABSTRACT This investigation was carried out in several public companies with employees disabilities in a their lower extremity. Firstly, the workers with disabilities positions were identified. Ergonomic dangers caused by repetitive movements and forced positioning were also detected. Those risks were analytically estimated and reviewed by using several well-known methods. Several risks in medium and high level were detected according to RULA and Check List Ocra methods, however those levels increase when taking into account the workers disability percentage using the Baremo AMA. Also, workers cardiac frequency was measured, in order to calculate the physical effort levels on their jobs. Results show that several jobs are extremely hard and hard in short work intervals, and heavy when performing a global analysis. In addition, the ‘Nordic Questionnaire’ was used to determine the pain that workers feel in diferent body areas, been this an important fact to take into account in the health surveillance program. Finally, taking into account the evaluation results, a musculoskeletal disorders prevention program for workers with disabilities was established. This program considers prevention and health care, physical conditioning and job duties assignment (based on workers habilities) in order to minimize the aforementioned risk levels, for the latter program is developed through which the demands required by the job and skills of the worker is entered, obtaining a summary of recommendations in order to determine if "No risk", "Is it requires adaptations" or "Immediate changes required" in the workplace.Item type:Ítem, Los factores de riesgos y su incidencia en las condiciones de trabajo en operadores de sopladoras, inyectora y fajilladoras del área de producción de envases plásticos de la Empresa INPLASTICO(Universidad Técnica de Ambato. Dirección de Posgrado. Facultad de Ingeniería en Sistemas, Electrónica e Industrial, 2015) ;Vega Pérez, Ricardo PaúlHerrera Montenegro, Genny MargaritaABSTRACT This research concerns the Ergonomic Risk Factors found in manufacturing activities in the plastic packaging Inplastico company, which has meant that staff suffer accidents and illnesses in carrying out its activities in the production area, which is why it is necessary that the personnel are aware of the risks involved in this work and are trained to develop their activities. To initiate an investigation, hazard identification and appraisal of risk factors in each job is done, this information allows the initial estimate of risk which proceed to determine the degree of danger, then using the method Owas ergonomic analysis of postural load of all the jobs considering all its activities and sub activities are performed. The purpose of this research is to develop and implement ergonomics manual work together with active enterprise to apply it breaks.Item type:Ítem, Análisis de riesgo mecánico y ergonómico en los trabajadores de la construcción de las viviendas rurales Tipo MIDUVI, y su incidencia en las condiciones de seguridad y salud en el trabajo(Universidad Técnica de Ambato. Facultad de Ingeniería en Sistemas, Electrónica e Industrial. Dirección de Posgrado, 2014) ;Vargas Arauz, Ángela VerónicaCórdova Suárez, Manolo AlexanderEn la presente investigación se desarrolla el análisis de los riesgos mecánicos y ergonómicos durante la construcción de las viviendas tipo MIDUVI del proyecto de vivienda “La Compañía” del cantón Ambato, provincia de Tungurahua. Se realiza la evaluación a los riesgos detectados como intolerables en los puestos de trabajo, para riesgos mecánicos se usa el método WILLIAM FINE en los riesgos de manejo de herramienta cortante y/o punzante, proyección de solidos o líquidos, caída de objetos en manipulación, trabajos en altura y a distinto nivel, piso irregular y, para riesgos ergonómicos se usa los métodos: NIOSH para levantamientos de cargas, REBA para posturas forzadas, Checklist OCRA para movimientos repetitivos y la Norma ISO 11079 para estrés por frío todos estos aplicados en el ámbito de la Seguridad e Higiene Industrial. Por medio de cuadros demostrativos y mediciones se aplican cada uno de los métodos y se obtiene diferentes resultados para determinar el nivel de actuación requerido. Finalmente se desarrolla un programa de prevención con el objetivo de controlar los riesgos intolerables analizados desde la fuente del peligro, el medio de trasmisión y por último el trabajador como receptor; y, además se crean procedimientos de capacitación, trabajo en alturas, levantamiento manual de cargas, que serán aplicados a las necesidades constructivas. EXECUTIVE SUMMARY In the present research has developed an analysis of the mechanical and ergonomic hazards present during the construction of housing type MIDUVI in the project “La Compañia” of Ambato canton, Tungurahua province. Evaluation was made to the risks identified as unacceptable in the workplace, for mechanical risks the FINE WILLIAM method is used in risk of management cutting tool and/or shooting, projection of solids or liquids, falling objects in handling, working at heights and at different levels, irregular floor, and is used for ergonomic hazards methods as NIOSH to lifting loads, REBA to forced postures, Checklist OCRA to repetitive movements and ISO 11079 Norm to stress freeze all of these applied in the field of Industrial Hygiene. Through demonstration charts and measurements each one of the methods are applied to obtain results to determine the required level of performance. Finally, a Prevention Program is developed with the objective to control the intolerable risks analyzed from the source of danger, transmission medium and the worker as a receiver; also many procedures are created like training, work at heights, manual lifting that will be applied to the construction requirements.
