Ingeniería en Sistemas, Electrónica e Industrial
URI permanente para esta comunidadhttp://repositorio.uta.edu.ec/handle/123456789/1
Examinar
5 resultados
Resultados de la búsqueda
Item type:Ítem, Sistema IoT para el control y monitoreo de fugas de GLP en entornos domésticos(2025-08) ;Llerena Ortega Andrés Mateo ;Robalino Peña Edgar FreddyUniversidad Técnica de Ambato. Facultad de Ingeniería en Sistemas, Electrónica e Industrial. Carrera de TelecomunicacionesSafety in the domestic use of Liquefied Petroleum Gas (LPG) is a critical component of household risk management, particularly in contexts where technical oversight of installations is limited. This research proposes the design and implementation of an Internet of Things (IoT)-based system aimed at the early detection of hazardous LPG concentrations, automatic activation of shut-off mechanisms, and real-time alert delivery to users. The proposed system integrates low-cost gas sensors, programmable microcontrollers, actuators for flow control, and wireless communication modules, enabling seamless deployment in residential environments. The design follows a distributed architecture based on continuous monitoring, risk threshold identification, and the immediate execution of corrective responses. Through an applied and interdisciplinary approach, the project combines electronics, embedded programming, data networks, and automation principles to construct a comprehensive solution to LPG leakage risks. Beyond its technical functionality, the system aims to promote a culture of prevention among end-users through accessible and user-friendly interaction tools. This work addresses the urgent need to enhance safety in domestic settings while contributing to the development of affordable, replicable technologies that improve community well-being and encourage the adoption of intelligent solutions in the residential sector.Item type:Ítem, Sistema electrónico de control y monitorización de vehículos en caso de robo para la empresa confecciones Galar mediante visión artificial(Universidad Técnica de Ambato. Facultad de Ingeniería en Sistemas, Electrónica e Industrial. Carrera de Telecomunicaciones, 2024-02) ;Lema Galarza, Fernando PaulCuji Rodríguez, Julio EnriqueThe present research project, an electronic vehicle control and monitoring system against theft is implemented for the company "Confecciones GALAR" using artificial vision. The system addresses the issue of vehicle security with an innovative solution that detects and monitors potential thefts on the company's premises, providing quick and efficient responses to risky situations. The implementation relies on security cameras equipped with artificial vision algorithms that automatically detect suspicious activities, especially those related to attempts to steal vehicles. The system analyzes people's behavior in the parking area and recognizes patterns associated with criminal activities. The electronic architecture of the system includes high-resolution cameras and a real-time image processing system. Deep learning techniques are used to identify and classify specific events, such as unauthorized presence near vehicles. The user interface provides real-time visualization and automatic alerts in suspicious situations. Technical aspects, such as the selection of artificial vision algorithms, hardware configuration, and effective integration into the operational environment of "Confecciones GALAR," are addressed. The system evaluation demonstrates a 95% effectiveness in simulated and real situations, highlighting its potential to reduce risks associated with vehicle thefts with a low margin of error.Item type:Ítem, Sistema de monitoreo de variables químicas con tecnología Iot de los suelos agrícolas para la cosecha de productos en agro Pujilí.(Universidad Técnica de Ambato. Facultad de Ingeniería en Sistemas, Electrónica e Industrial. Carrera de Ingeniería en Electrónica y Comunicaciones, 2023-03) ;Guilcaso Tipan, Jessica KatherinePallo Noroña, Juan PabloIn the present research project, the macro nutrient parameters essential for the development of plants in the soil and necessary for the cultivation of different types of crops such as: vegetables, fruits, roses, among others, were inquired about. Among the parameters that were measured were: nitrogen, phosphorus and potassium, the system consists of a sensor node for the measurement of the chemical variables of the soil by means of the NPK sensor and interpreted by means of an ESP32 microcontroller and sent by means of LoRa technology. For the communication of the sensor and the microcontroller, the RS485 module was used through a Modbus interface, this module performs a signal conversion from RS485 to TTL so that the microcontroller can understand and read the variables acquired by the sensor. In addition, a soil moisture sensor was used to complement the NPK sensor, since it is necessary to know the moisture level in order to correctly measure the nutrients. In the visualization of the data, an OLED screen was used to read the chemical variables, once the variables were verified, they were sent to the Lora Gateway through LoRa communication to transmit to the server and visualize the variables through a user interface.Item type:Ítem, Dispositivo electrónico de aprendizaje alfabético traductor de voz a braille(Universidad Técnica de Ambato. Facultad de Ingeniería en Sistemas, Electrónica e Industrial. Carrera de Ingeniería en Electrónica y Comunicaciones, 2022-07) ;Villavicencio López, Pablo DavidAltamirano Meléndez, SantiagoThis research project is based on the need for autonomous learning of braille, so an electronic learning device is implemented that translates voice into braille alphabetically. This device has been created so that people with visual disabilities can study and face life in a more independent way, with the purpose that people with visual disabilities learn the braille literacy system in an autonomous way, which will allow them to communicate more effectively with the environment in the future. This device consists of a matrix of points in which the alphabet is represented in braille form, this matrix is connected to a microcontroller which in turn is connected via the Internet to a mobile application that translates voice to text and sends the signal to the microcontroller, this is responsible for interpreting the text and translating it into the form in which braille is represented, this is achieved through an algorithm which assigns each letter a sequence of points that are then represented in the relief matrix, thus the user can go learning the braille writing system autonomously. The tests were carried out at Julius Doephner Educational Unit, in students and teachers with visual impairment, concluding that the device is of high usefulness for the learning process of the teacher and the student, because by having a device of this type, you are facilitating the learning of braille.Item type:Ítem, Sistema Electrónico de Registro y Control de Acceso de personal del Centro Internacional “COMPASSION” en la ciudad de Latacunga(Universidad Técnica de Ambato. Facultad de Ingeniería en Sistemas, Electrónica e Industrial. Carrera de Ingeniería en electrónica y Comunicaciones, 2017) ;Tipanluisa Arequipa, Jaime PaúlJurado Lozada, Marco AntonioEl presente proyecto de investigación estudia a los sistemas electrónicos de registro y control de acceso, para mejorar el servicio que estos sistemas prestan haciendo uso de tecnologías actuales. La falta de responsabilidad al trabajo ha sido motivo para que diversas empresas implementen sistemas de registro y el incremento de la inseguridad para el implemento de sistemas de control de acceso. El sistema electrónico de registro fue desarrollado para reconocer de forma electrónica al personal del Centro Internacional Compassion, el cual permite obtener los datos informativos de los mismos, la fecha laborable, hora de entrada y salida; además se desarrolló un sistema de control de acceso del personal, para evitar el ingreso sujetos extraños al centro y sea motivo para que la seguridad de la misma sea vulnerada. A continuación se detalla la forma de funcionamiento del sistema desarrollado: A la entrada del sistema se obtiene el patrón de la huella dactilar mediante un sensor biométrico, una vez acondicionada la señal se envía a un microcontrolador para realizar el procesamiento de la imagen y de esta forma obtener información entendible para el usuario, el cual mediante un sistema de comunicación es enviada y almacenada en un servidor para su posterior respaldo. En consecuencia a la implementación del proyecto los niños pertenecientes al proyecto Compassion se sentirán seguros dentro de la institución, recibirán una mejor atención por parte del personal que labora en el centro y podrán fortalecer el área cognitiva, psicológica y bíblica para su buen desarrollo intelectual, emocional y físico.
