Ingeniería en Sistemas, Electrónica e Industrial
URI permanente para esta comunidadhttp://repositorio.uta.edu.ec/handle/123456789/1
Examinar
3 resultados
Resultados de la búsqueda
Item type:Ítem, Rectenna basada en arreglos de antenas tipo parche para captación de energía electromagnética(Universidad Técnica de Ambato. Facultad de Ingeniería en Sistemas, Electrónica e Industrial. Carrera de Ingeniería en Electrónica y Comunicaciones, 2023-09) ;Tello Matehus, Fausto DavidGordón Gallegos, Carlos Diegot present, most of the energy sources are natural gas, oil and nuclear industry. But it has to be taken into account that these sources of energy supply are not for life and their price is generally accepted. In addition, it must be considered that they are environmentally unfriendly. Thus, today there is a need for energy alternatives that address the shortcomings that other resources have, considering all the studies that have been conducted on the collection of cleaner, greener and safer energy. Through various researches it is known that energy has many resources from where it can be obtained, such as solar energy, wind energy, vibrations and the one that in this intention will be investigated, which is electromagnetic environmental signals. This research project is focused on gathering information on rectennas, as well as on patch antenna arrays for Energy Harvesting Systems designed at frequencies up to 3 Ghz, in addition to a simulation and implementation of a rectenna consisting of elements and technology suitable for electromagnetic energy harvesting systems; and at the same time analyze the results obtained from the tests carried out in order to demonstrate its efficiency in the aforementioned systems. The design of this prototype, was made in Ansys HFSS software, which allowed us to make a 2x2 array of rectangular patch antennas, in which λ/4 transformers are used to couple the transmission lines to a characteristic impedance of 50 Ohms; at the same time the design of a multiplier and voltage rectifier for high frequencies is also performed, in this case for 2. 4 Ghz; in such a way that by joining the antenna array with the rectifier, a useful rectenna for electromagnetic energy collection is obtained.Item type:Ítem, Sistema de cosecha y almacenamiento de energía con sistemas de rectennas y celdas fotovoltaicas para dispositivos inalámbricos IoT de baja potencia.(Universidad Técnica de Ambato. Facultad de Ingeniería en Sistemas, Electrónica e Industrial. Carrera de Ingeniería en Electrónica y Comunicaciones, 2022-09) ;Valle Muñoz, Milton PalmiroGordón Gallegos, Carlos DiegoDue to the advancement of technology, the increase in IoT devices has been notorious, devices that allow the user to have constant control and monitoring of parameters such as temperature, pressure, the state of a piece of equipment or the health of a certain person, has also It has been notorious that due to the small size of the batteries, they cannot keep the device working for long periods of time and they are required to be constantly removed from their jobs to recharge the battery, an activity that generates a deterioration of the equipment due to mobility and reduction of load cycles. In this project, a system was developed that allowed harvesting the existing electromagnetic energy in the RF waves of Wi-Fi, adding to the energy harvested from sunlight and later storing it in a lithium battery, for this a system of 4 stages, in the first stage the RF energy is captured by means of a Fractal antenna known as a Sierpinski carpet and is multiplied by 2 using the Cockcroft Walton circuit to increase the acquired voltage, in the second stage, a solar panel is used mono crystalline to harvest solar energy, in the third stage a series connection is used to add the voltages acquired from the two previous stages and the last stage is in charge of regulating the voltage and storing it in a lithium battery. The project is designed with the aim of providing auxiliary power to low-power IoT devices, reducing costs for electrical energy consumption and increasing the durability of battery charges in IoT equipment, this work is also part of the research project: Electromagnetic Energy Collection System for Energy Supply in Internet of Things (IoT) Terminals in Fifth Generation (5G) environments” approved by Resolution No. UTACONIN-2020-0299-R dated August 21, 2020Item type:Ítem, Sistema de captación de energía electromagnética para abastecimiento de energía en dispositivos móviles(Universidad Técnica de Ambato. Facultad de Ingeniería en Sistemas, Electrónica e Industrial. Maestría en Telecomunicaciones, 2021) ;Criollo Paredes, Walter IvánGordón Gallegos, Carlos DiegoThe constant growth of energy demand and its future vision of energy supply in many areas of science, engineering and technology, especially in mobile devices,makeenvironmentally friendly and environmentally friendly electromagnetic energy harvesting a high demand alternative in energy generation.They make environmentally friendly and environmentally friendly electromagnetic energy harvesting a high demand alternative in power generation.Therefore, the present work focuses on the development, design, simulation of two Microstrip antennas for electromagnetic energy harvesting systems. The first, is the Hybrid Resonator Planar Structure Antenna (HR-PSA) that operates at a specific frequency of 900MHz, while the other is an Archimedean Spiral Multiband Antenna (ASMA) that works in a frequency range of 1 to 3 GHz, both were developed for energy harvesting systems.
