Ingeniería en Sistemas, Electrónica e Industrial
URI permanente para esta comunidadhttp://repositorio.uta.edu.ec/handle/123456789/1
Examinar
2 resultados
Resultados de la búsqueda
Item type:Ítem, Estudio de tiempos y movimientos en el área de acabado de la curtiduría Tungurahua S.A.(Universidad Técnica de Ambato. Facultad de Ingeniería en Sistemas, Electrónica e Industrial. Carrera de Industrial, 2023-03) ;Barros Guevara, Bryan IsmaelOrtiz Guerrero, Daysi MargaritaIndustrial development has undoubtedly been favored, thanks to processes standardization and continuous improvement applied in most industries. Results of an efficient production, without any doubt, depends on an optimal planning based on standard times and production capacities, for this reason, in this research a time and motion study has been carried out at finishing area of Tannery Tungurahua S.A. In this study, the current working method for each of the finishing processes of San Marino school leather is initially described, through the elaboration of its flow chart elaboration and the identification of the activities corresponding to each procedure. Thus, analytical cursograms of each process are elaborated, in order to analyze in a more detailed way the product journey and type of operation that is carried out. Then calculation of the standard times are carried out, starting from activities coding, then both operators’ performance factor is calculated through the Westinghouse method, as well as supplements using established valuations by the ILO. Consequently, production capacities that will allow each process to be analyzed are calculated according to leather belts number that are manufactured, in this way, an average of 385 leather belts per day was obtained. As an improvement proposal, it is suggested to apply the SMED methodology for machines preparation and for general operations development, tool focused on the adhering, pigmenting and sanding processes, evidencing time reductions by 25.25%, 38.18% and 18.27% respectively. In the same way, it is proposed to apply the Theory of Constraints for the adhering process, which turned out to be the bottleneck requiring a time of 276.16 seconds. Finally, it is recommended to purchase an electric pallet truck that allows optimizing the transport times during batches transfer in order to improve handling units and to save operators integrity.Item type:Ítem, Plan de mejora de la productividad en la producción de cuero en la Empresa Tenería San José Cía. Ltda., Planta 1(Universidad Técnica de Ambato. Facultad de Ingeniería en Sistemas, Electrónica e Industrial. Carrera de Ingeniería Industrial en Procesos de Automatización, 2016-07) ;Gómez Coello, Ray DavidJordán Hidalgo, Edisson PatricioEn esta investigación se aplicaron herramientas y metodologías para la medición, análisis y mejora del índice de productividad en la producción de cuero en la empresa Tenería San José Cía. Ltda., planta 1. El estudio partió desde la identificación del problema de baja productividad en la producción de cuero y se orientó a establecer mejoras que aporten significativamente en el desempeño de los procesos de producción, con la aplicación de la mejora continua, la ayuda de la metodología de las 5’s y la técnica de producción más limpia. El estudio de la situación actual se realizó por cada proceso de producción de planta 1, y se concluyó que el índice de productividad más bajo es de 5,97 bandas/$ con respecto al pago de mano de obra y la productividad más alta es 112,97 bandas/$ con respecto al consumo de diésel, para la medición se emplearon los indicadores P1 que es la productividad con respecto al pago de consumo de energía eléctrica, P2 que es la productividad con respecto al pago de consumo de agua, P3 que es la productividad con respecto al pago de mano de obra, P4 que es la productividad con respecto al pago de consumo de diésel y P5 que es la productividad con respecto al pago de consumo de otros insumos, mediante la aplicación de las 5’s se aumenta la productividad en un 15,34% y con la producción se logra un aumento de 51,5 % en la productividad. ABSTRACT This research tools and methodologies for measurement, analysis and improvement of productivity index in leather production company in San Jose Tannery Co. were applied. Ltda., 1. floor The study started from identifying the problem of low productivity in the production of leather and was aimed at establishing improvements that contribute significantly to the performance of production processes, with the implementation of continuous improvement, aid the methodology of the 5's and cleaner production techniques. The study of the current situation was carried out for each production process 1 floor, and concluded that the lowest productivity rate is 5.97 bands / $ with respect to the payment of labor and higher productivity is 112 97 bands / $ compared to diesel consumption for measuring the P1 indicators is productivity with respect to the payment of electricity consumption, P2 is productivity regarding payment of water consumption were used, P3 it is productivity with respect to the payment of labor, P4 that is productivity regarding payment of diesel consumption and P5 is productivity regarding the payment of consumption of other inputs by applying the 5's is increasing 15.34% productivity in production and increased 51.5% is achieved in productivity.
