Ingeniería Civil y Mecánica

URI permanente para esta comunidadhttp://repositorio.uta.edu.ec/handle/123456789/898

Examinar

Resultados de la búsqueda

Mostrando 1 - 5 de 5
  • Item type:Ítem,
    Rediseño geométrico y diseño estructural de pavimento de la vía Belen Cuatro Esquinas – Bellavista de Cusubamba desde la abscisa 0+000 – 5+000, ubicada en la parroquia Cusubamba, cantón Salcedo, provincia de Cotopaxi
    (Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil, 2024-08)
    Jiménez Mogro, Alex Javier
    ;
    Bayas Altamirano, Myriam Marisol
    In recent years, Ecuador has tried to improve its competitiveness compared to other countries in its road infrastructure, however, not all areas of the country have managed to optimize their road network. Without going any further, the quality of the Cotopaxi Road network has been overshadowed by its neighboring provinces, which is why the need arises to address new projects that contribute to the evolution of the infrastructure. To contribute to this objective, road studies were carried out following the processes dictated by the MTOP 2003 regulations. Starting with the survey of the topographic strip using an RTK device that revealed that the road was in mountainous terrain. The traffic study indicated that the TPDA for a design period of 20 years would be 778 vehicles/day, classifying the road as a CLASS III collector. With this information, the geometric redesign was carried out, adjusting the existing road to a new layout that complies with the parameters suggested by the standard and also without exceeding very large cut and fill areas. The structural package was designed based on the AASHTO-93 Method using the design CBR obtained in the soil study, finally the minimum and recommended thicknesses for subbase, base and asphalt layer are configured. Finally, the road design proposal was evaluated, and an estimated budget was developed, providing a clear view of the resources required and facilitating accurate planning for future project implementation.
  • Item type:Ítem,
    Diseño geométrico y del pavimento de la vía entre los sectores quebrada Yarahuaico - Cundualo - Laipo Grande, tramo abscisas km 0+000 - 4+760, parroquia Juan Montalvo, cantón Latacunga, provincia de Cotopaxi
    (Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil, 2024-08)
    Chancusig Gavilanes, Erika Fernanda
    ;
    Guevara Robalino, Jorge Javier
    Currently, there is a need among communities to be able to communicate and that the products from the harvests could arrive on time and in good conditions to improve their economy, productivity and quality of life. The project began with a non-experimental transectional research design, supported by the search for data in situ, with a descriptive scope and quantitative approach. A road with a distance of 3,834 km was obtained, its maximum design speed was 60 km/h, with a 7.20 m roadway and 0.60 m ditches on each side of the road, of rural classification type III. The initial pavement structure offered an uneconomical design which was optimized without going beyond the limits, giving as such a thickness of 5 cm for the asphalt concrete, 10 cm of base with type 3 material and 20 cm of subbase with class 3 stone material, for which a total investment of $ 3,684,351,91 was required. Roads are the geographical elements that allow communication between one point and another. From their planning to their construction and commissioning, a series of activities are carried out, some more complex than others. However, the method for their geometric layout and road surface design will always be subject to standards and regulations. As a result, an optimal design for the sector was obtained, which is within the budgeted and planned.
  • Item type:Ítem,
    Mejoramiento del trazado geométrico y diseño de la estructura de pavimento de la vía paso lateral Puyo Norte, cantón Pastaza, provincia de Pastaza
    (Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil, 2021-02)
    Salinas Terán, Danny Paul
    ;
    Bayas Altamirano, Myriam Marisol
    For the development of this technical project, a topographic survey was carried out, where it was possible to obtain 471 topographic points and determine a flat type topography, in the same way, a class IV road could be obtained by counting vehicular traffic, according to the regulations of the Ministry of Transport and Public Works. The study of soils was carried out, determining their physical properties (granulometry, SUCS classification, Atterberg limits, humidity percentage, maximum dry density, optimum humidity), and mechanical (design CBR), which was used for the calculation of the Flexible pavement structure supported by AASHTO Standard 93. In addition, the geometric layout of the road was improved based on the 2003 Standard for Geometric Design of Roads, meeting the requirements for horizontal and vertical design, later the transversal design of the road was also carried out. Finally, the project's referential budget was carried out together with its analysis of unit prices, revealing an estimated amount for the construction of the roa.
  • Item type:Ítem,
    Trazado y diseño geométrico de la vía Arajuno – Juan Vicente, cantón Arajuno, provincia de Pastaza
    (Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil, 2020-08)
    Martínez Salinas, Lino Omar
    ;
    Acosta Lozada, Rodrigo Iván
    In this technical project, a topographic strip of approximately 30 meters was determined with a total of 3162 topographic points, later the study of vehicular traffic was developed which would allow us to classify the road as a type III collector road with a projected TPDA for 20 years of 946 vehicles per day according to the regulations of the Ministry of Transport and Public Works Then the Geometric Design of the road was carried out; With respect to the Horizontal Geometric Design, minimum radio of 42 meters were obtained and in the Vertical Design, maximum slopes of up to 12 percent in specific sections The soil study was also carried out, resulting in a silty soil with low plasticity and a design CBR of 4.91 percent, then the Flexible Pavement Design was carried out, obtaining as a result an improvement layer of 60 cm, sub-base layer 20 cm class 3, 15 cm class 2 base layer and a 5 cm asphalt mat To finally carry out the study and design of the complementary works and obtain a referential budget of 3 248 149.07 with an approximate time of 12 months for the execution of the project
  • Item type:Ítem,
    El trazado geométrico actual y la congestión vehicular, en el sector de Tillales, provincia de el Oro
    (Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica. Maestría en Vías Terrestres, 2016)
    Campoverde Solís, Víctor Homar
    ;
    Moreira Cedeño, Friscson Lutgardo
    Population growth produced by the big cities of the country, knowledge of the geometrical characteristics of the current routes, the increase in percent of vehicles, has caused a chaotic situation in the transit of light, medium and heavy vehicles, which alternate vehicular circulation systems planning, has been required to relieve traffic produced in the Tillales sector of the El Oro Province. With a methodology based on studies of motorways and first class roads, the study of this research has been done, resulting in a Manual that collected rules, pictures and design procedures, creating a new model of the path, as a distributor of traffic type diamond weight, that meets standards and technical specifications to get a vehicle flow, reduce traffic accidents and have a proper connection between the motorway under construction from Huaquillas to Tillales with the E-25 State network called the network of the coast, in order to render a good service and improved connectivity with the E-25 corridor and the city of Machala.