Ingeniería Civil y Mecánica
URI permanente para esta comunidadhttp://repositorio.uta.edu.ec/handle/123456789/898
Examinar
4 resultados
Resultados de la búsqueda
Item type:Ítem, Análisis de las propiedades mecánicas de la madera de ciprés (CUPRESSUS), provenientes de la provincia de Tungurahua y su factibilidad como material estructural de acuerdo a la norma ecuatoriana de la construcción 2015 (NEC 2015)(Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil, 2025-02) ;Delgado Lucio, Mario EduardoUreña Aguirre, Maritza ElizabethThe present experimental study aims to provide precise and detailed data on the mechanical properties of cypress wood, with a focus on its behavior under perpendicular bending to the grain and parallel tensile forces to the grain. The wood samples used in the tests were obtained from three specific locations: the Cárcel and Macasto sawmills in the Ambato canton and a sawmill in the Quero canton, all located in the province of Tungurahua. This approach allowed for an assessment of the influence of the wood's origin on its mechanical properties. To develop the tests, a survey of the sawmills and their respective mechanical properties, such as load capacity, modulus of elasticity, and allowable stress, was conducted as an initial methodological step to identify representative sources of cypress wood in Tungurahua province. The tests were carried out following the guidelines of ASTM A143-94, which establishes procedures for specimen preparation and testing. Five specimens were manufactured for each type of mechanical test, resulting in a total of 30 samples analyzed. Additionally, physical properties, such as moisture content in green and dry states, were evaluated in accordance with the specifications of NTE INEN 896 (2013). This ensured uniform initial conditions of the samples, a critical factor in obtaining reliable results. In the mechanical tests, the modulus of elasticity and allowable stresses were determined using the formulas established in ASTM D198. The results showed that cypress wood exhibits suitable mechanical properties for structural applications, particularly in perpendicular bending to the grain. In this regard, the wood from the Cárcel, Macasto, and Quero sawmills stood out for its remarkable resistance. However, the results for parallel tensile forces were lower than the requirements for demanding structural applications. In conclusion, cypress wood is a viable option for structures subjected to bending stresses, provided its limitations in parallel tension are considered. This highlights the importance of carefully selecting its use based on the demands of the structural design.Item type:Ítem, Análisis comparativo de las propiedades mecánicas, tracción paralela a la fibra y flexión perpendicular a la fibra de la madera de Arrayán, proveniente de la provincia de Tungurahua y su factibilidad como material estructural de acuerdo con la Norma Ecuatoriana de la Construcción 2015 (NEC 2015)(Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil, 2025-02) ;Paredes Villalva, Jonathan AlexanderBayas Altamirano, Myriam MarisolThis experimental work was developed with the aim of analysing the physical and mechanical properties of Myrtle wood from the province of Tungurahua, specifically from the cities of Ambato, Salasaca, Tisaleo and Mocha, because there is no previous research with tangible data to compare with other wood species and categorise them as structural material that can be used for the benefit of professionals and pre-professionals in the field of construction. In the first phase, Myrtle wood was collected from these locations and specimens were made according to ASTM D143-94 specifications. To guarantee the quality and uniformity of the results, pieces free of defects and with homogeneous sections were selected. The geographical coordinates of the locations where the wood was obtained in each city were also recorded, and a bibliographic and documentary approach was used to support the experimental work. This initial phase included the preparation of specimens for moisture content, perpendicular bending, parallel tension and compression tests parallel to the grain, ensuring that international standards were met. In the second phase, physical and mechanical tests were carried out using equipment such as an electric kiln, an electronic balance and a universal testing machine. The data obtained on the moisture content, elastic modulus and allowable stress of the specimens made it possible to identify significant variations in the properties of the wood according to its origin. In the third phase, a comparative analysis was carried out, which showed that Arrayán wood complies with the ranges established by the Ecuadorian Construction Standard (NEC 2015), confirming its viability as a structural material. This study provides an important technical framework for the implementation of Arrayán as a sustainable resource in construction and opens the door to future research in this field.Item type:Ítem, Análisis de las propiedades mecánicas de la madera de canelo proveniente de la ciudad del Puyo provincia de Pastaza y su factibilidad como material estructural de acuerdo con la norma Ecuatoriana de la Construcción 2015 (NEC 2015)(Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil, 2024-08) ;Ponce Romero, Carlos AndrésBayas Altamirano, Myriam MarisolThe objective of this experimental work is to provide information on the mechanical properties of canelo wood (perpendicular bending and traction parallel to the fiber) from the urban parish: Puyo, and the rural parishes: El Triunfo, Veracruz and Tarqui, province of Pastaza, and reveal the maximum stress, modulus of elasticity and resistance to parallel traction and perpendicular bending to the grain that this type of wood presents. The research was based on the ASTM D143-94 regulations for the preparation of the test pieces, in which 6 samples were made for each test and both physical and mechanical properties were determined. In the physical tests, the moisture content was determined in the green or freshly cut state and dry state, which complies with the parameters given by the NTE INEN 896 (2013) standard, while for the mechanical tests the elastic modulus and the admissible stresses in axial bending and parallel traction of each of the parish specimens, governed by the formulas established by the ASTM D198 standard. According to the results of the analyzes given of the 48 samples of canelo wood, it was established that this type of wood can be used as a structural material, since its calculated mechanical properties gave significant values, taking into consideration that the wood Coming from the Puyo urban parish, it had better resistance in parallel traction and perpendicular bending to the fiber.Item type:Ítem, Análisis de las propiedades mecánicas, tracción paralela a la fibra y flexión perpendicular a la fibra de la madera de capulí, proveniente de la provincia de Tungurahua y su factibilidad como material estructural de acuerdo con la norma ecuatoriana de la construcción 2015 (NEC 2015)(Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil, 2023-03) ;Aldás Ramos, Daysi ElianaBayas Altamirano, Myriam MarisolThis research seeks to provide information on the use of capulí wood from the cantons of Ambato, Cevallos, Mocha, Pelileo, Santiago de Píllaro, Quero and Tisalelo, as a structural material in construction. This experimental work complies with the parameters established in the standards ASTM D143-94, ASTM D198, NTE INEN 896 and NEC-SE-MD 2015, from which samples of green or freshly cut wood were extracted and specimens of capulí wood with a natural drying process were elaborated. By means of physical tests, the moisture content in the dry and green state was determined, and by means of mechanical tests, the modulus of elasticity and admissible stress were determined. In addition, the results obtained in each canton were used to create load vs. deformation graphs; stress vs. unit deformation; comparative tables of the results obtained and zoning maps. Based on the analysis carried out on 84 capulí wood specimens, it was determined that capulí wood can be used as a structural material, since it presented representative values in the mechanical tests carried out, being the wood from the Ambato canton the one that showed a higher resistance to both parallel traction and static bending.
