Ingeniería Civil y Mecánica
URI permanente para esta comunidadhttp://repositorio.uta.edu.ec/handle/123456789/898
Examinar
4 resultados
Resultados de la búsqueda
Item type:Ítem, Análisis comparativo de las propiedades físico-mecánicas y la resistencia de suelos de la costa y sierra, estabilizados con ceniza de caña de bambú al 2%, 3% y 5%.(Universidad Técnica de Ambato-Facultad de Ingeniería Civil y Mecánica-Carrera de Ingeniería Civil, 2026-07-03) ;Yánez Barrionuevo Dayana Mercedes ;Bayas Altamirano Myriam MarisolUniversidad Técnica de Ambato-Facultad de Ingeniería Civil y Mecánica-Carrera de Ingeniería CivilThe objective of this research was to evaluate the physical and mechanical properties and the strength of two types of soil through the incorporation of bamboo cane ash (CCB) in proportions of 2%, 3%, and 5%. Two soils of different origin were analyzed: one taken from Santo Domingo, in the coastal region (M1), classified as clayey sand (SC, A-6), and another from San Bartolomé de Pinllo, Ambato, in the highland region (M2), also classified as clayey sand (SC, A-2-4). The study was carried out in three phases: characterization of the soils in their natural state, incorporation of ash at the three indicated percentages, and technical comparison of the results. Moisture content, particle-size analysis, Atterberg limits, standard Proctor, and CBR tests were performed, and the ash composition was determined by X-ray fluorescence (XRF). XRF revealed an ash dominated by potassium, with little silica and almost no calcium, which does not meet the requirements for a pozzolan (ASTM C618). With the ash, the plasticity index of both soils decreased, but the CBR dropped sharply: that of Santo Domingo fell from 6.21% to 1.12% with 5% CCB, and that of San Bartolomé from 15.66% to 2.01%, with losses greater than 80%. It was concluded that, under the conditions tested, bamboo cane ash (CCB) is not an effective stabilizer for these soils, since it acts as an inert filler that reduces their bearing capacity.Item type:Ítem, Análisis De La Resistencia A Compresión Del Hormigón Empleando Ceniza De Caña De Azúcar Como Sustitución Parcial De Agregado Fino Del 2.5%, 3.5% Y 4.5% Para Determinar Su Cantidad Optima(Universidad Técnica de Ambato-Facultad de Ingeniería Civil y Mecánica-Carrera de Ingeniería Civil, 2026-07-01) ;Arias Vaca Esteban Benjamín ;Arellano Yasaca Diana VictoriaUniversidad Técnica de Ambato-Facultad de Ingeniería Civil y Mecánica-Carrera de Ingeniería CivilThis research analyzed the compressive strength of 210 kg/cm² concrete through the partial substitution of fine aggregate with sugarcane bagasse ash (SCBA) at proportions of 2.5%, 3.5%, and 4.5%. The quantitative and experimental study evaluated the mechanical behavior of 36 cylindrical specimens tested at 7, 14, and 28 days. The methodology included the chemical and physical characterization of materials, mix design according to ACI 211.1, and a controlled calcination process of the ash (600°C ± 50°C). Results demonstrated that the 2.5% SCBA substitution optimizes mechanical behavior, reaching a compressive strength of 267.31 kg/cm² at 28 days, representing an increase of 1.37% compared to the control mix. Statistical analysis (Welch ANOVA and Tukey's test) confirmed that, while all dosages achieved the design compressive strength (f'c), the 2.5% concentration was statistically equivalent to the control and superior to the remaining mixes. It was concluded that sugarcane bagasse ash acts through a dual mechanism: a filler effect, which densifies the granular skeleton, and pozzolanic reactivity, confirmed by an oxide content of 87.92% (SiO₂ + Al₂O₃ + Fe₂O₃). A substitution of 2.5% is recommended as the optimal dosage to improve concrete strength, simultaneously contributing to agroindustrial waste management and mitigating the scarcity of natural aggregates.Item type:Ítem, Análisis De La Resistencia A La Compresión De La Muestra Original Del Hormigón Simple E Incluyendo La Ceniza Cáscara De Arroz Como Sustituto Parcial Del Agregado Fino(Universidad Técnica de Ambato-Facultad de Ingeniería Civil y Mecánica-Carrera de Ingeniería Civil, 2026-06-29) ;Claudio Tonato Erika Nayeli ;Ortiz Montero Santiago AndrésUniversidad Técnica de Ambato-Facultad de Ingeniería Civil y Mecánica-Carrera de Ingeniería CivilThis study evaluated the compressive strength of plain concrete through the partial substitution of fine aggregate with rice husk ash (RHA), to determine its technical viability as a sustainable alternative in construction. The research followed a quantitative experimental approach structured in three phases: first, the physical and chemical characterization of materials; second, the fabrication of cylindrical specimens (100 mm × 200 mm); and third, the mechanical evaluation under compression. A total of 36 specimens were prepared across four groups with RHA substitution levels of 0%, 3% (0.04 kg), 5% (0.06 kg), and 7% (0.09 kg), tested at 7, 14, and 28 days of curing. Mix design followed the ACI 211.1 method, with a design strength of f'c = 210 kg/cm². X-ray fluorescence analysis confirmed that silicon is the predominant element in RHA at 43.88%, verifying its pozzolanic potential. Water absorption was measured at 15.52%, which required a correction in the mixing water to maintain a constant waterto-cement ratio of w/c = 0.57. At 28 days, the mixes with 3% and 5% RHA exceeded the reference concrete, with compressive strength increases of 3.10% and 4.32%, respectively. The 5% substitution level achieved the highest compressive strength at 278.86 kg/cm², establishing it as the optimal proportion. The 7% mix showed a 5.36% reduction relative to the control. It is concluded that 5% substitution is technically viable and supports the valorization of agro-industrial waste, although its implementation requires prior calcination and sieving processes.Item type:Ítem, Análisis comparativo de la resistencia a la compresión del hormigón simple con reemplazo parcial de la calcinación de la caña de maíz como puzolana y un hormigón con materiales tradicionales.(Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil., 2025-02) ;Borja Paredes, Daniel RolandoPeñafiel Valla, Lourdes GabrielaThis study has shown that pozzolan made from corn cane ash is an effective material for improving the properties of concrete. The results obtained have shown that the addition of this pozzolan in an adequate proportion can significantly increase the compressive strength of the concrete. Through the experimental study, it was observed that the addition of 6 percent corn cane ash to concrete produces a greater compressive strength after 28 days, reaching a value of 230.98 kg/square centimeters. However, it has been detected that, by increasing the proportion of pozzolana above this value, the strength of the concrete decreases significantly. In addition, it was proven that concrete mixtures with corn cane ash pozzolana meet the requirements of plastic consistency and workability. The de nsity obtained for all mixtures exceeds the minimum value established by the ACI 318 19 standard. In summary, this study has demonstrated the effectiveness of corn cane ash pozzolana to improve the properties of concrete, and its use in construction is recommended to obtain high strength and quality concrete. The use of corn cane ash pozzolana in construction obtained additional benefits, such as reducing the carbon footprint and promoting sustainability. Corn cane ash is an agricultural waste that is generated in large quantities, and its use as a pozzolana can help reduce the amount of waste sent to landfills; It is also a cheaper and more accessible alternative to traditional pozzolans, which can be beneficial for the construction industry. Importantly, although the results of this study are promising, further research is needed to determine the feasibility and effectiveness of corncane ash pozzolana in different applications and conditions. However, the results obtained in this study suggest that this additive is a material with great potential to improve the properties of concrete and promote sustainability in construction.
