Ingeniería Civil y Mecánica

URI permanente para esta comunidadhttp://repositorio.uta.edu.ec/handle/123456789/898

Examinar

Resultados de la búsqueda

Mostrando 1 - 10 de 36
  • Item type:Ítem,
    Diseño y construcción de una máquina peletizadora de aserrín para la Facultad de Ingeniería Civil y Mecánica
    (Universidad Técnica de Ambato-Facultad de Ingeniería Civil y Mecánica-Carrera Ingeniería Mecánica, 2026-01-26)
    Tintin Sánchez Kevin Daniel
    ;
    Mayorga Pardo Alex Santiago
    ;
    Universidad Técnica de Ambato-Facultad de Ingeniería Civil y Mecánica-Carrera Ingeniería Mecánica
    This technical project addresses the design and construction of a sawdust pelletizing machine for the Faculty of Civil and Mechanical Engineering at the Technical University of Ambato. The research is based on the growing need for sustainable energy alternatives in the face of fossil fuel scarcity and the environmental impact of poorly managed biomass waste. The transformation of sawdust into pellets is proposed as an efficient, economical, and environmentally responsible solution. The theoretical framework outlines the importance of biomass as an energy resource, the critical parameters for pellet quality (moisture content, particle size, compaction pressure, and additives), as well as the processes of dosing, mixing, pressing, drying, and storage. The existing types of pelletizers (flat die and ring die) are also analyzed, justifying the choice of a machine with rotating rollers and a static die due to its efficiency and adaptability to academic environments. The machine's design was based on criteria of efficiency, ergonomics, safety, and sustainability. A configuration with rotating rollers and a static die was chosen, ensuring better heat dissipation and uniform pellet compaction. The system is structured into four subsystems: power transmission via bevel gears, material compression and extrusion with rollers and a die, controlled cutting to define the pellet length, and auxiliary dosing and sieving mechanisms. These elements ensure reliable operation, ease of maintenance, and adaptability to academic environments. In conclusion, the project successfully developed a functional pellet mill capable of transforming sawdust waste into high-energy-density pellets. In addition to its environmental and economic benefits, the machine serves as a pedagogical tool, strengthening students' practical training in mechanical design, heat transfer, and energy efficiency.
  • Item type:Ítem,
    Análisis del comportamiento de conexiones rígidas para pórticos especiales compuestos mediante modelos de elementos finitos.
    (Magister en Ingeniería Civil con mención en Estructuras Metálicas, 2025)
    Castillo Altamirano Fausto Israel
    ;
    Ramírez Cabrera Wladimir José
    The present research focuses on the analysis of the behavior of connections for special composite frames, given the seismic hazard in Ecuador; three types of connections were studied: End Plate, External Diaphragm and Double Split Tee (DST) through finite element analysis, with square columns filled with concrete (Concrete Filled Tube, CFT). In the investigation it was necessary to apply the rotation protocols proposed by AISC (American Institute of Steel Construction) in AISC 341-16. Non-linear contact between parts that make up the connections were used, as well as the definition of the constitutive laws of each material that makes up the connection in order to capture the plastic behavior under the cyclic loads imposed in the analysis. The results were analyzed by means of three criteria: hysteretic curves, plastic deformations and stress concentration. Altogether, the DST, End Plate and external diaphragm connections agree with the experimental tests of previous investigations. The plastic deformation mechanisms were mainly located in the beam resulting in the formation of the plastic hinge. The concrete filled column remained in the linear zone without higher stress concentration while the beam only had deformation at the point of the plastic hinge. The DST connection was the one that showed the highest capacity to the rotation of 0.04 rad, considering that it exceeded with 43% of the 0.8 times the plastic moment of the beam, followed by the End plate connection with 24% and the external diaphragm connection with 8%, which is why they are qualified as rigid connections according to AISC. In this seismic Ecuadorian environment, the present research emphasizes the relevance of using numerical analysis based on standards such as AISC, to evaluate the behavior of structural connections and their capacity to resist the real conditions of the seismic conditions
  • Item type:Ítem,
    Desarrollo de una aplicación computacional para el análisis de estructuras utilizando elementos finitos
    (Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Mecánica., 2025-02)
    Yugcha Chango, Alex Adrian
    ;
    Núñez Núñez, Diego Fernando
    This project addresses the growing need for tools that enable the efficient and pedagogical resolution of complex structural problems, given the complexity of current commercial solutions. By facilitating the learning of the finite element method, it aims to promote an understanding of the fundamentals of structural analysis and their application to real-world problems. Additionally, it focuses on offering an interactive experience that fosters the development of skills for solving complex problems in both academic and professional settings. An application was designed using matrix calculation algorithms in Python, complemented by specialized libraries of this programming language to handle matrices, generate visualizations, and produce detailed reports. Validation was carried out through experimental tests and comparisons with specialized software, analyzing practical cases of bar structures, trusses, and frames. Simultaneously, bibliographic references were consulted to support the mathematical formulation and the design of the graphical interface, ensuring that users can understand and replicate the calculations performed by the program. The results obtained demonstrate that the application is capable of accurately calculating stiffness matrices, nodal displacements, and stress diagrams, maintaining a minimal difference compared to results generated by commercial tools. Furthermore, the application offers a unique pedagogical approach, explaining the internal processes of the FEM and providing detailed reports of the structural analysis. In conclusion, this proposal represents an accessible and educational alternative that integrates advanced calculations with an intuitive interface, contributing to both learning and professional practice in structural engineering.
  • Item type:Ítem,
    Diseño y construcción de una prótesis de mano derecha con amputación de falanges producida mediante impresión 3D
    (Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Mecánica, 2025-02)
    Coba Ronquillo, Emily Anahí
    ;
    Guerra Chiquito, Karla Abigail
    ;
    Espín Lagos, Segundo Manuel
    The design of a functional 3D printed prosthesis focuses on meeting the specific needs of people with partial amputations of the right hand. To ensure controlled and realistic movement, a four-bar mechanism was implemented, configured in a dual system for the four main fingers and a single mechanism for the thumb, this approach ensures that the prosthesis accurately mimics the natural movements of the human hand, providing a functional and customised solution. Each component of the prototype was developed through a comprehensive process based on position and trajectory calculations including CAD drawing in specialised software, which is based on a graphical synthesis of mechanisms allowing the creation of parts with precise geometries and adjusted to the anatomical characteristics of the user. Subsequently, the design was evaluated by means of finite element simulations through a static analysis under the loads generated in each articulated joint, in which the structural resistance and the correct functioning of the mechanism under different conditions of use were verified. 3D printing, as the main manufacturing method, presented significant advantages in terms of customisation, cost reduction and production times. The selected material, PETG, stood out for its strength, flexibility and durability, essential characteristics to withstand the stresses and repetitive movements of the prototype. This integrated approach combines advanced design and simulation technology with the efficiency of additive manufacturing, achieving a practical, accessible and adaptable device for the end user.
  • Item type:Ítem,
    Diseño y construcción de una máquina afiladora de cuchillas de widia para la maderera Guambuguete’s de la ciudad de San José de Chimbo
    (Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Mecánica, 2025-02)
    Guambuguete Yauqui, Andrés Isaías
    ;
    Muisin Martínez, Alex Efraín
    ;
    Analuiza Maiza, Oscar Iván
    The design and construction of the widia blade sharpening machine for Maderera Guambuguete's arose due to the difficulty of sharpening the blades, the distance from the sharpening machines and the high cost of this process, factors that limited production and reduced efficiency in the daily preparation of wood. The methodology applied employs the documentary research method, as well as field research, with a design approach; while the types of research employed are descriptive, which begins with an analysis of the constituent parts, followed by analytical design, as well as CAD, CAE analysis, and the preparation of plans, continuing with the acquisition of materials, the machining of each part and the assembly of the set. The design began with the determination of the Knoop hardness of 7000 HK, using a 0.4 hp motor and an AISI 1045 steel blade holder, with a diameter of 2” and 600 mm. It includes a 5 mm sliding plate, 4 mm protective box, and a 126 mm power screw. The structure is formed by the base plate, collector, guide plate and 50x6 AL 50x6 stops. A 0.85 hp coolant recirculation pump was selected, with a flow rate of 10 lpm, meeting the required standards; while the safety factors vary between the one calculated and the one given by finite elements with an error percentage ranging from -4 to +20 percent that serves as a reference for the proper execution of the project. With the analyses carried out, using components and materials according to the specifications, the design and construction of the widia blade sharpening machine was achieved and the respective testing was carried out.
  • Item type:Ítem,
    Análisis de las propiedades de sección transversal de perfiles tipo UV conformados en frío
    (Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Mecánica, 2024-08)
    López Espín, Jonathan David
    ;
    Torrealba Toledo, Kevin Alexander
    ;
    Peña Jordán, Francisco Agustín
    Information on cold-formed structural elements is limited, but has become indispensable in the field of construction, as it allows for improved design and analysis of structures. In the present investigation, a comprehensive analysis of the section properties of 6 and 8 mm thicknesses was carried out. It started with a review of information to understand the behaviour of these profiles, section properties such as inertias, torsional constants and warping constants were calculated using traditional analytical methods. To validate these calculations, a mathematical model based on the finite element method (FEM) was developed, which allowed the behaviour of the cross-sections to be simulated more accurately. Experimental torsion, bending and compression tests were performed to compare the results obtained by analytical calculations and FEM analysis. In the case of the tests to determine the warping constant, technical limitations were faced, such as the lack of a high test machine for compression tests on thicker sections, which led to the use of thinner sections. Finally, the results showed that the FEM provides intermediate predictions between analytical methods and experimental tests, the differences observed in the behaviour of the specimens were discussed, conclusions were drawn on the discrepancy of results between the different methods, and recommendations for future studies were proposed, including the application of heat treatments to the profiles to improve the values obtained in the tests.
  • Item type:Ítem,
    Análisis de juntas tipo bridas apernadas para estructuras de telecomunicaciones de tipo monopolo usando el método de elementos finitos
    (Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica. Maestría en Ingeniería Civil con Mención en Estructuras Metálicas, 2023-03)
    Muyulema Muyulema, Dany Germán
    ;
    Peña Jordán, Francisco Agustín
    Monopole structures are used as telecommunication towers, especially in urban areas where zoning is difficult. The load hypothesis that predominates their design is wind, since most of the collapses are due to this effect. The most critical part that is more prone to failure in the towers is the bolted flange joint, which requires a special focus in the design to guarantee its resistance and performance over time. In the present investigation, a finite element model was obtained that approximated the actual structural behavior of bolted flange joints. The finite element models were developed in a specialized software and monotonic lateral load tests were performed for their validation. The results obtained by measuring loads and displacements in the tests were compared with those obtained in the finite element model, showing non-significant variations in the points of interest of the bolted flange. The finite element model was useful for predicting the structural behavior of the flanges, making the design process more dynamic.
  • Item type:Ítem,
    Análisis de amortiguadores híbridos utilizados en estructuras metálicas de edificaciones de mediana altura para mejorar su respuesta a cargas sísmicas
    (Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica. Maestría en Ingeniería Civil con Mención en Estructuras Metálicas, 2023-03)
    Jaya Guanoluisa, Mario Hernán
    ;
    Arroba Arroba, César Hernán
    The present research focused on identifying different configurations of hybrid dampers that are applicable to mid-rise buildings through the review of research, these devices were evaluated with computational tools, using the finite element method, which allowed to know the structural behavior of this type of systems with reliable mathematical models. Three types of dampers were identified that use fusible elements such as slits and weak plates to dissipate energy through deformations and contact surfaces that dissipate energy through friction, the analyzed dampers are composed especially of steel plates and surfaces of rough materials joined by bolts forming a single assembly, These devices are then adapted with welded or bolted joints to the structures, especially in the central zone of the beams, thus preventing damage to the structural element and giving way to the formation of ball joints and deformations in the fusible elements. After the analysis, the damper with the most stable behavior was identified in order to propose a proposal to improve the seismic performance and better dissipate the energy of the seismic loads.
  • Item type:Ítem,
    Diseño y construcción de una plataforma elevadora móvil para un refractómetro queratómetro de 25 kg mediante el uso de software especializado de modelado
    (Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Mecánica, 2023-03)
    Abril Villalva, Joseph Mateo
    ;
    Gonzalo Eduardo, López Villacis
    The project carried out seeks to satisfy the creation of a machine specifically in the area of occupational visual health, which adapts to the particular conditions of the work environment, since there are machines on the market with different characteristics that do not support real conditions and they are not affordable. Bibliographical studies were carried out on machines dedicated to the lifting and transfer of loads, with this, the requirements of the interested parties were collected, for this the design was evaluated under a weighted and corrected criterion to begin with the sizing and analytical calculation of the loads that must be support the parts of the platform. The structure was then designed using modeling software to apply finite element analysis to simulate loading and safeguard the integrity and function of the platform. As a result, the platform moves the visual machine to different work spaces, without the need to exert excessive direct forces on the visual equipment, providing a stable surface and adding a lifting system to modulate the height between the patient and the refractometer keratometer.
  • Item type:Ítem,
    Estudio comparativo entre las juntas de conexión empernadas y por soldadura en el área de acceso vehicular y entre piso de la edificación del parqueadero ubicado en la av. 12 de Noviembre de la ciudad de Ambato y su incidencia en el comportamiento mecánico operacional
    (Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica. Maestría en Ingeniería Civil con Mención en Estructuras Metálicas, 2022-09)
    Zavala Córdova, Luis Eduardo
    ;
    Ureña Aguirre, Maritza Elizabeth
    This degree work is based on a building that was built in the city of Ambato in order to determine what would be the optimum behavior to the requirements established by the structural design standards, for which we proceeded to perform a quantitative analysis in the collection and analysis of results in the comparison of the joints that are currently built by welding, to perform the analysis by connections of RBS and BFP joints, taking into account the criteria of the Ecuadorian Construction Standard (NEC-15), Load and Resistance Factor Design (LRFD) and American Institute of Steel Construction (AISC 360-16), this analysis contributes to the modeling of bolted and welded connections, in order to analyze the localized buckling phenomenon in the wings and web of the metal profiles of the beam-column joint in the vehicular access area and the joint between floors, The results obtained showed that the RBS connection has a better deformation behavior without affecting the web and flanges of the profile, and that the BFP connection cannot be used in the same way as the BFP connection, the BFP connection cannot be used in joints where the inclination of the beam towards the column has a steep slope because the plates must be connected perpendicularly and the welding connection tends to be the most economical and can be used in any area, however it tends to reach the equivalent stressstrain deformation limit, in relation to the cost of materials used for the installation of the BFP joint it is more expensive because it implies placing more supply of elements in the joint.