Ingeniería Civil y Mecánica
URI permanente para esta comunidadhttp://repositorio.uta.edu.ec/handle/123456789/898
Examinar
30 resultados
Resultados de la búsqueda
Item type:Ítem, Diseño de un sistema de pistolas Dumming para un sistema Jig de la línea de producción Shineray X30, para la empresa Ciudad Del Auto Ciauto Cia.Ltda basado en un análisis de factibilidad(Universidad Técnica de Ambato-Facultad de Ingeniería Civil y Mecánica-Carrera de Ingeniería Mecánica, 2026-07-08) ;Mayorga Ortiz Esteban Alejandro ;Vargas Tello José Ignacio ;Carrillo Rosero Carlos MauricioUniversidad Técnica de Ambato-Facultad de Ingeniería Civil y Mecánica-Carrera de Ingeniería MecánicaThis project was carried out at Ciudad del Auto CIAUTO CÍA. LTDA., specifically on the Shineray X30 body production line, where it was identified that the spot welding process at the side panel and floor assembly station was performed manually, resulting in operational limitations related to non-productive time, restricted accessibility to the work area, operator overexertion, and elevated cycle times within the station. In order to optimize this process, a semi-automated system of self-actuated Dummy welding guns was designed and implemented, integrated into the existing production JIG while considering the geometric, structural, pneumatic, electrical, and quality requirements demanded by the automotive industry. The applied methodology combined field, bibliographic, and experimental methods, allowing the analysis of the station’s real operational behavior, the development of tower-type support structures for the precise positioning of the welding guns, and the technical validation of the system under actual operating conditions. The implementation significantly reduced direct operator intervention in hard-to-access areas, particularly on the underside of the vehicle body, while also reducing the process cycle time from 16 minutes and 23 seconds to 2 minutes and 26 seconds, maintaining a 100% acceptance rate of the weld spots according to the criteria established by the AWS D8.1M/D8.1 standard and the company’s internal quality requirements. Furthermore, the results demonstrated operational savings of approximately 111.96 man-hours per month, enabling the redistribution of human resources to higher-demand production lines without increasing operational workload. From a production perspective, the daily manufacturing capacity increased from an average of 12 to 14 units, representing an approximate 16.67% increase in productivity while maintaining the same number of operators. Finally, the technical-economic analysis determined that the proposed system is both operationally viable and financially feasible, since the improvements in productivity, reduction of non-productive times, and optimization of human resources contribute to a progressive return on investment throughout the estimated service life of the implemented system.Item type:Ítem, Diseño, construcción y evaluación experimental de un prototipo de trituradora de botellas de vidrio para procesos de reciclaje(Universidad Técnica de Ambato-Facultad de Ingeniería Civil y Mecánica-Carrera de Ingeniería Mecánica, 2026-07-06) ;Buri Mendoza Edwin Fernando ;Núñez Núñez Diego FernandoUniversidad Técnica de Ambato-Facultad de Ingeniería Civil y Mecánica-Carrera de Ingeniería MecánicaThis technical project presents the design, construction, and experimental evaluation of a hammer type glass bottle crusher prototype aimed at supporting small and medium scale recycling operations. Given the critically low glass recycling rates across Latin America, a cost-effective mechanical solution was developed to reduce glass bottles into cullet with an average particle size of 4.77 mm. The crushing power was calculated using Bond's method, which determined the need for a 3 HP electric motor running at 1800 rpm with a nominal torque of 11.86 N·m. Key mechanical components including shafts, hammers, discs, and a belt driven transmission system were analytically dimensioned and validated through SolidWorks finite element simulations using Von Mises stress, displacement, and safety factor criteria. Material selection was technically driven: A36 steel with INDURA Overlay 60 abrasion-resistant coating for hammers, AISI 4340 steel for the secondary shaft, and AISI 1018 for the primary shaft. Experimental testing confirmed continuous operation over 8-hour shifts without jamming or motor overheating. Granulometric analysis showed that 70% of the crushed output met the target aperture of 4.77 mm, demonstrating effective size reduction for recycling applications. The resulting prototype is portable, economically viable, and easy to maintain, representing a practical solution for decentralized glass waste processing.Item type:Ítem, Diseño y construcción de un prototipo de patineta eléctrica para mejorar la movilidad de los guardias de seguridad en la Universidad Técnica de Ambato(Universidad Técnica de Ambato-Facultad de Ingeniería Civil y Mecánica-Carrera Ingeniería Mecánica, 2026-01-29) ;Morales Mayorga Jared Sebastián ;Carlos Mauricio Carrillo RoseroUniversidad Técnica de Ambato-Facultad de Ingeniería Civil y Mecánica-Carrera Ingeniería MecánicaThis thesis addresses the mobility challenges faced by security personnel at the Technical University of Ambato, who need to move around the extensive campus during their patrols. The main objective was to design and build a functional electric scooter prototype, incorporating the institution's branding and meeting the operational requirements of the guards. The methodology employed was based on a descriptive and experimental design. Critical load parameters were determined, establishing a total design mass of 111 kg and a patrol speed of 20 km/h. The structure consists of a tubular chassis made of AISI 1020 steel, the design of which was validated through finite element analysis (FEA), resulting in a high safety factor that guarantees structural integrity without plastic deformation. The drive system was configured with a 500W BLDC hub motor and a 48V – 13Ah lithium-ion battery, selected to provide the necessary power on inclines and a working autonomy of 3 to 4 hours under high demand. Additionally, static load tests with users weighing between 60 and 120 kg and analysis of the welded joints with a high safety factor demonstrated exceptional robustness, confirming that the vehicle is a safe, economical, and sustainable solution for improving university safety.Item type:Ítem, Diseño y construcción de un mecanismo para desarrollar musculatura en extremidades superiores, inferiores y abdomen(Universidad Técnica de Ambato-Facultad de Ingeniería Civil y Mecánica-Carrera Ingeniería Mecánica, 2026-01-26) ;Paredes Montero Ariel Estefano ;Espín Lagos Segundo ManuelUniversidad Técnica de Ambato-Facultad de Ingeniería Civil y Mecánica-Carrera Ingeniería MecánicaThis project addresses the design and construction of an integral mechanism oriented toward strengthening the musculature of the upper limbs, lower limbs, and abdomen. The research arises from the need for safe, efficient exercise equipment adapted to the anthropometric characteristics of adult users, primarily in households, strengthtraining centers, and public spaces where exercise machines are typically installed. Based on this need, the project proposes the design and construction of a functional device aimed at muscular development. The methodology involved a detailed bibliographic review of technical backgrounds and patents, as well as a comparative analysis of mechanism alternatives by evaluating their functionality, manufacturability, and capacity to engage different muscle groups. Through this evaluation, a viable mechanism was selected. Computer-aided design tools were used to generate a functional model. Subsequently, analytical calculations and static stress analyses were performed to verify structural resistance, along with an ergonomic assessment of the equipment. As a result, a prototype was built using ASTM A500 structural steel, capable of withstanding a load of 140 kg. The equipment proved to be resistant and functional, meeting the requirements of comfort and safety for installation in homes and strengthtraining facilities. In conclusion, the project confirmed the technical feasibility of developing a functional, accessible, and structurally safe device capable of contributing to muscular strengthening in training centers and domestic environments.Item type:Ítem, Diseño y construcción de una máquina peletizadora de aserrín para la Facultad de Ingeniería Civil y Mecánica(Universidad Técnica de Ambato-Facultad de Ingeniería Civil y Mecánica-Carrera Ingeniería Mecánica, 2026-01-26) ;Tintin Sánchez Kevin Daniel ;Mayorga Pardo Alex SantiagoUniversidad Técnica de Ambato-Facultad de Ingeniería Civil y Mecánica-Carrera Ingeniería MecánicaThis technical project addresses the design and construction of a sawdust pelletizing machine for the Faculty of Civil and Mechanical Engineering at the Technical University of Ambato. The research is based on the growing need for sustainable energy alternatives in the face of fossil fuel scarcity and the environmental impact of poorly managed biomass waste. The transformation of sawdust into pellets is proposed as an efficient, economical, and environmentally responsible solution. The theoretical framework outlines the importance of biomass as an energy resource, the critical parameters for pellet quality (moisture content, particle size, compaction pressure, and additives), as well as the processes of dosing, mixing, pressing, drying, and storage. The existing types of pelletizers (flat die and ring die) are also analyzed, justifying the choice of a machine with rotating rollers and a static die due to its efficiency and adaptability to academic environments. The machine's design was based on criteria of efficiency, ergonomics, safety, and sustainability. A configuration with rotating rollers and a static die was chosen, ensuring better heat dissipation and uniform pellet compaction. The system is structured into four subsystems: power transmission via bevel gears, material compression and extrusion with rollers and a die, controlled cutting to define the pellet length, and auxiliary dosing and sieving mechanisms. These elements ensure reliable operation, ease of maintenance, and adaptability to academic environments. In conclusion, the project successfully developed a functional pellet mill capable of transforming sawdust waste into high-energy-density pellets. In addition to its environmental and economic benefits, the machine serves as a pedagogical tool, strengthening students' practical training in mechanical design, heat transfer, and energy efficiency.Item type:Ítem, Diseño y construcción de un prototipo de máquina de tinturación de tela con enfoque mecánico para la empresa M&B textiles(Universidad Técnica de Ambato-Facultad de Ingeniería Civil y Mecánica-Carrera de Ingeniería Mecánica, 2026-01-23) ;Ruiz Orbea Mónica Isabel ;López Villacís Gonzalo EduardoUniversidad Técnica de Ambato-Facultad de Ingeniería Civil y Mecánica-Carrera de Ingeniería MecánicaIn Ecuador, there has been strong growth in the textile sector in recent years, forcing the industry to improve production and meet quality standards. Fabric dyeing is a crucial step in the industry; however, most micro-enterprises still use manual methods or equipment that cannot easily control the parameters of the process. As a result, productivity, process sustainability and business competitiveness are affected. A prototype fabric dyeing machine, with mechanical elements, was developed based on a design that aimed to control parameters such as temperature, agitation and chemical bath flow. As part of this objective, mechanical engineering standards were established, focusing on the appropriate choice of corrosion-resistant materials, effective integration, and the generation of heat transfer mechanisms. In addition, simulations and experimental evaluations were carried out to confirm the prototype's testing capacity under real operating conditions. The equipment construction process produced a safe and functional machine that could operate under small-scale production conditions and met the real needs of M&B Textiles. It becomes a relevant element, as we reduced the need for resources such as water and chemical consumption, as well as colour uniformity and error reduction due to the level of manual intervention.Item type:Ítem, Diseño y Cotización de un laboratorio básico de Mantenimiento Industrial para la Carrera de Mecánica de la Facultad de Ingeniería Civil y Mecánica en la Universidad Técnica de Ambato(Ingeniería Civil y Mecánica. Carrera Ingeniería Mecánica, 2025) ;Jordán Camino Bryan AnthonyCastro Miniguano Christian ByronThe Faculty of Civil and Mechanical Engineering, through the Technical University of Ambato, trains competent professionals in the field of Mechanical Engineering. However, there is currently a need to strengthen the practical implementation of technical knowledge through an educational infrastructure that supports adequate training development. In view of this circumstance, the design and quotation of a basic Industrial Maintenance laboratory is suggested. The project is to create a functional, technically feasible laboratory adapted to academic and operational requirements, with equipment to replicate authentic failures in the industrial environment. To achieve this, three analysis benches were created: one focused on faults in spur and helical gears, another for vibrations in bearings, belts, and couplings, and a third to assess the demulsibility and viscosity of lubricating oils. After setting up the machinery, the mechanical design and technical dossier for each one were prepared. Next, the laboratory space was divided up, including the corresponding technical procedures, and a detailed quote was prepared along with the estimated total investment, at five percent, which will facilitate modifications in future implementation. Finally, an economic feasibility study was carried out, which determined that the project was viable. As a result, a comprehensive proposal was developed to strengthen the technical training of students and offer services to the community, positioning the laboratory as an essential educational space for the key development of the Industrial Maintenance area.Item type:Ítem, Diseño y construcción de una llave de ajuste para tubería redonda(Ingeniería Civil y Mecánica. Carrera Ingeniería Mecánica, 2025) ;Tobar Castillo Anthony RicardoCastro Miniguano Christian ByronThis research addresses a recurring issue in industries such as the oil sector: premature wear and damage caused by conventional pipe adjustment tools. In response, an ergonomic and functional adjustment wrench was designed and built for 3½-inch round pipes, aiming to improve tightening efficiency without compromising the material's integrity. The study falls within the research line of Mechanical Design and Applied Technology and is highly relevant given the high operational costs associated with traditional tool failures. The methodology involved material selection, structural simulations based on the Von Mises criterion, construction using AISI 1018 and 4140 steels, surface treatment through phosphating, and ergonomic assessment using the REBA method. The innovative aspect lies in the design of wrap-around jaws that distribute pressure evenly along the pipe, minimizing the risk of surface damage and improving the tool's durability. Its effectiveness was validated through functional and comparative testing, showing a reduction in pipe damage compared to traditional tools. This development represents a significant contribution to operational safety, maintenance cost reduction, and improved working conditions for operatorsItem type:Ítem, Diseño y construcción de una grúa techo para personas de tercera edad(Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Mecánica, 2024-08) ;Changoluisa Chacha, Jimy David ;Ushiña Llamba, Jeremy BryanLópez Villacís, Gonzalo EduardoThe project focused on addressing a solution to the problems that exist when manually carrying out the transfer of elderly people from one place to another within the home of life "Luis Maldonado Tamayo", the same one that requires considerable physical effort toward both caregivers and residents. About 60 percent of patients have limited mobility, stressing the need for a system that facilitates these transfers and improves their quality of life. A roof crane adapted to the environment of the gerontological center was designed and built. The methodology included the mechanical design of the system by means of finite element analysis tools, ensuring a correct distribution of forces and the appropriate selection of materials. The transfer mechanism was designed to support a maximum load of 70 kilograms. Displacement and mobility performance tests were carried out to ensure the efficiency and performance of the system. Alternatives were evaluated and the most appropriate option was selected considering costs, durability, and ease of assembly. At the end of the project, it was demonstrated that the roof crane significantly reduces the physical effort and the time required for the transfer of patients. The system provided a safe and efficient method for mobilizing older adults, improving the ergonomics of care staff work. The working environment became safer and more comfortable, contributing to the overall improvement of the quality of life of the center's residents.Item type:Ítem, Diseño y construcción de una máquina para ejercitar dorsales altos y bajos destinada para el gimnasio del Campus Huachi del centro deportivo de la Universidad Técnica de Ambato(Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Mecánica, 2024-07) ;Mopocita Ortiz, Oscar FabricioCorrea Jácome, Juan FranciscoThis research project focuses on the design and construction of a machine designed to exercise the upper and lower back. The proposed equipment will be delivered to the gym on the Huachi campus of the Sports Center of the Technical University of Ambato. The need arises due to the absence of a machine with these characteristics in this location. To address this challenge, necessary anthropometric body measurements were taken of the students who will frequent this gym, with the purpose of developing an ergonomic design that guarantees optimal health and efficient performance for those who use this new addition. The importance of having ergonomic equipment adapted to the measurements and needs of the users lies in the reduction of injuries derived from inadequate postures or the use of machines not specifically designed for students who practice sports in this environment. To achieve this objective, a rigorous mechanical design process will be carried out using the software tool specialized in this type of designs. In addition, an analysis and simulation will be carried out in CAE engineering, a crucial tool for evaluating parts and assemblies subjected to individual or simultaneous physical phenomena. In the course of this research, electronic devices and specialized software will be used, which will provide detailed mechanical models of the equipment to be developed. From these models, the most efficient design will be selected to carry out the construction of the equipment. In addition, an exhaustive analysis of the parts and assemblies subject to physical phenomena will be carried out, allowing a comprehensive validation of the project. It should be noted that the materials necessary for the construction of the machinery will be purchased locally, within the province of Tungurahua. These materials will undergo mechanical processes during the assembly and construction of the equipment, thus ensuring the quality and efficiency of the final product. Keywords: Anthropometry, ergonomics, properties, mechanics, mechanical design, physical phenomen
