Ingeniería Civil y Mecánica
URI permanente para esta comunidadhttp://repositorio.uta.edu.ec/handle/123456789/898
Examinar
6 resultados
Resultados de la búsqueda
Item type:Ítem, Incorporación de ceniza de cáscara de maní como material cementante para el mejoramiento de la resistencia y durabilidad del hormigón(Universidad Técnica de Ambato-Facultad de Ingeniería Civil y Mecánica-Carrera de Ingeniería Civil, 2026-07-01) ;Lema Villafuerte David Alejandro ;Ortiz Montero Santiago AndrésUniversidad Técnica de Ambato-Facultad de Ingeniería Civil y Mecánica-Carrera de Ingeniería CivilThe present experimental study aimed to analyze how the incorporation of peanut shell ash as a partial cement substitute contributes to the improvement of the compressive strength and durability of conventional concrete. For this study, replacement percentages of 1.5%, 2.0%, and 2.5% were evaluated and compared with a conventional concrete control mix, which was designed to achieve a compressive strength of 210 kg/cm². The ash was obtained from peanut shells collected in the city of Portoviejo, Manabí Province. The peanut shells were subjected to natural drying and controlled calcination between 400°C and 800°C in an artisanal furnace. Using the resulting ash and the corresponding aggregates, a total of 36 concrete cylinders were produced: 9 for conventional concrete and 27 for concrete modified with different ash percentages. These specimens were subjected to compressive strength tests at ages of 7, 14, and 28 days. Additionally, density, absorption, and permeable voids tests were performed on hardened concrete to evaluate the durability of both conventional and ash-modified concrete. The results showed that the mix containing 1.5% ash achieved the highest average compressive strength at 28 days, reaching 220.94 kg/cm², slightly exceeding the control mix, which recorded 219.24 kg/cm². On the other hand, the mix containing 2.5% ash presented the lowest average compressive strength, with 193.75 kg/cm². Regarding durability, the mixture with 1.5% ash obtained the best performance, presenting the lowest absorption percentage (3.31%) and permeable void content (8.20%). It was concluded that the incorporation of peanut shell ash in low and controlled percentages can maintain or slightly increase the mechanical properties of concrete due to the cementitious properties provided by the silica contained in this type of ash.Item type:Ítem, Elaboración de un proceso de conservación y mantenimiento de la vía comprendida entre el barrio La Libertad km 0+000 hasta el caserío Nitón km 3+940, en el cantón San Pedro de Pelileo, provincia de Tungurahua(Universidad Técnica de Ambato-Facultad de Ingeniería Civil y Mecánica-Carrera de Ingeniería Civil, 2026-01-27) ;Chacón Salazar María Cristina ;Portilla Yandún Favio PaúlUniversidad Técnica de Ambato-Facultad de Ingeniería Civil y Mecánica-Carrera de Ingeniería CivilThe La Libertad – Nitón road allows moving from the Pelileo canton to other hamlets as well as to the Ambato canton, providing connectivity and economic development of the place, for which reason, a process of conservation and maintenance of the road has been designed in order to improve its level of service and guarantee the durability of the road infrastructure. A topographic survey was developed with RTK technology, obtaining a digital road model with an average road width of 6.00 m that has two lanes of vehicular circulation and side ditches for drainage. In addition, a manual vehicular capacity was carried out for 7 consecutive days of 12 hours a day thus determining an Annual Daily Average Traffic (ADT) of 1000 veh/day with a projection for 20 years (2045) of 1080 veh/day that according to the MTOP is classified in a “Collector Type II” road. On the other hand, the current condition of the pavement was evaluated according to the Pavement Condition Index (PCI) method where 14 sampling units were analyzed obtaining a PCI value equal to 85.74 which indicates that it has a “Good” condition although it requires maintenance to avoid progressive deterioration. In addition, laboratory tests were carried out on three soil samples taken along the track every 1000 m; the results gave us that the soil corresponds to a poorly graded silty sand (AASHTO A-2-4- / SUCS SM) with a plasticity index of less than 3.5 and an average CBR of 26.03%, classifying it, as well as an excellent subgrade. Finally, a technical proposal for conservation and maintenance was designed that includes solutions such as surface sealing, crack sealing, surface patch and deep patching with their respective specifications based on the AASHTO and MTOP standards, thus guaranteeing that the proposed plan will contribute to reducing costs in rehabilitation and improving road safety through a more efficient transport system.Item type:Ítem, Estudio de dureza en materiales biodegradables para la elaboración de cuchillos(Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Mecánica, 2024-08) ;Machado Muñoz, Elias Bladimir ;Yancha Masaquiza, Michael PaúlLópez Velástegui, Jorge EnriqueThe study aims to analyze the resistance and viability of various biodegradable materials on the market for the manufacture of knives, comparing them with the properties of the plastic materials used and determining their suitability as sustainable alternatives in the production of bioplastic knives and contributing to the production of bioplastic knives. in reducing plastic waste that pollutes the environment. The research includes hardness, bending and tensile tests of the selected materials, using appropriate methods, as well as specialized software for design and simulation. Key mechanical properties, such as hardness, elastic modulus, and percent elongation, were evaluated to determine the ability of biodegradable materials to maintain a sharp edge so that they can resist deformation under applied loads. Bending tests showed that bamboo-reinforced wheat bioplastics offered greater resistance to deformation compared to unreinforced bioplastics and other plastic knives. In tensile tests, wheat bioplastic demonstrated higher tensile strength and elongation capacity compared to regular plastic. As a result of the tests carried out, it is considered that the biodegradable materials studied are not only viable from an environmental point of view, but also meet the essential hardness requirements to perform well in cutting different foods. promoting the adoption of new sustainable alternatives in the utensils industry.Item type:Ítem, Diseño de un plan de conservación de la estructura de la capa de rodadura de la vía Pelileo - Cotaló abs 12+000 – 16+000 de la provincia de Tungurahua(Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil, 2023-09) ;Fiallos Cevallos, María JoséPérez Maldonado, Ruth LorenaRiobamba city has various alternative routes for access, one of which is the Pelileo - Cotaló road. This road has shown deterioration in its pavement structure, raising the need for developing an appropriate conservation plan to maintain it in optimal conditions and ensure its functionality. An exhaustive topographic survey of the Pelileo - Cotaló road was carried out, providing detailed information about its physical characteristics. Additionally, vulnerable areas of the road were identified through this survey, laying a solid foundation for the subsequent development of the conservation plan. Furthermore, a comprehensive traffic study was conducted on the road, based on the Average Annual Daily Traffic (AADT). This analysis allowed for understanding the vehicular flow and vehicle characteristics, and the PCI was performed. These data were fundamental in comprehending pavement wear and deterioration, as well as identifying specific maintenance needs. As a result of this work, a specific maintenance plan was proposed to address the road's deterioration. The plan relied on the data obtained from the topographic survey and traffic study. Proposed actions included crack sealing, pothole repair, and periodic maintenance. These interventions have proven effective in improving the road's condition to ensure its durability and safety.Item type:Ítem, Análisis comparativo de la mezcla asfáltica modificada con la adición de polímeros termoplásticos, caucho de llanta reciclado y pavimento asfáltico tradicional para el mantenimiento vial en fallas piel de cocodrilo(Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil, 2023-07) ;Sarabia Lescano, Karen NicoleFrías Torres, Alex XavierThis research work was carried out with the objective of analyzing and comparing the mechanical properties of modified asphalt mixes with the addition of: thermoplastic polymers and recycled tire rubber compared to traditional asphalt. Asphalt briquettes were made: modified and conventional using the Marshall Method, then the behavior of an asphalt mixture was analyzed by modifying it with the addition of the following thermoplastic polymer percentages of 5, 10, 15 and 20 percent by weight; and rubber, 2, 3, 4 and 5 percent were used, where 36 samples were manufactured, of which 12 correspond to conventional asphalt mixes and 24 to modified mixes; By using these materials, the optimum percentage of recycled polymers that can be added to asphalt mixtures was achieved, largely fulfilling and improving the design requirements established by the standards so that they can be used in the paving process. It was determined that the hot mix asphalt modified with tire rubber did improve some of the mechanical properties, since it presented resistant and durable characteristics, obtaining an optimal percentage of addition of 5.7 percent of rubber and an optimal percentage of addition of 6.6 percent thermoplastic polymer.Item type:Ítem, Efectos de la zeolita como material suplementario del cemento portland en la resistencia a tracción indirecta del concreto estructural(Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil, 2022-01) ;Panimbosa Panimbosa, Ricardo GuillermoMedina Robalino, Wilson SantiagoThe emission of carbon dioxide from the cement industry generates environmental issues, hence the strategy of using zeolites as supplementary cementitious materials and contributing to the fight against climate change. In this research, the physical characterization of a zeolite mineral and a type of cement, commercially available, was carried out, followed was determinate of the setting time in pastes to reach the topic that is the indirect tensile strength of concretes for structural purposes, designed for a compressive strength of 24MPa and the permeability was evaluated through the penetration of pressurized water, a factor that influences its durability. The percentages of cement substitution by zeolite were 0, 10, 15 and 20 percent in pastes such as concretes. The density, specific surface area and average particle size determined for zeolite are 2.41 grams per cubic centimeter, 563 square meters per kilogram and 5 micrometers, respectively. The cement-zeolite pastes evidenced a higher water demand to enter normal consistency, hence, a longer setting time. To ensure the workability of the zeolite concrete, a plasticizing additive was used. The indirect tensile strength at the age of 28 days in the zeolite concrete specimens was almost equal to or slightly lower than the control concrete. Water penetration was higher at all substitution percentages. The 20 percent substitution showed better effects on fresh and hardened properties.
