Ingeniería Civil y Mecánica
URI permanente para esta comunidadhttp://repositorio.uta.edu.ec/handle/123456789/898
Examinar
5 resultados
Resultados de la búsqueda
Item type:Ítem, Diseño, construcción y validación de un banco hidráulico didáctico para ensayos de laboratorio(Universidad Técnica de Ambato-Facultad de Ingeniería Civil y Mecánica-Carrera de Ingeniería Mecánica, 2026-07-05) ;Amaguaña Guaman Edisson Mauricio ;Toapanta Calapaqui Erik Anderson ;López Villacís Gonzalo EduardoUniversidad Técnica de Ambato-Facultad de Ingeniería Civil y Mecánica-Carrera de Ingeniería MecánicaThis thesis project aimed to design, build, and validate a didactic hydraulic bench that allows for laboratory testing, ensuring its safe operation in various experimental practices and strengthening the understanding of fluid mechanics. This initiative arose from the identified technical gap of limited access to didactic equipment in laboratories that allows for the analysis of key operational variables such as flow rate, pressure, and circulation under fully controlled conditions. The project involved the rigorous selection of commercially available mechanical and hydraulic components, including a 1.5 HP centrifugal pump, a high-precision digital flow meter, gate and globe regulating valves, and acrylic level gauges. The support structure was fabricated from AISI 304 stainless steel and incorporates nylon wheels with brakes to facilitate internal mobility and secure operation. A closed recirculation circuit was integrated to optimize water usage and minimize waste. Structural simulations were developed using the finite element method, and experimental field validations were performed. Mechanical results indicated a minimum structural safety factor of 1.17 under full static load and stable hydraulic behavior. Flow tests recorded flow rate variations from 0.041 L/min to 0.068 L/min, controlled by valves, operating at a maximum controlled pressure of 46.41 psi. The test bench safely and efficiently fulfills the educational purposes for academic engineering experimentationItem type:Ítem, Determinación de las condiciones técnicas del sistema de abastecimiento de agua potable y manual de operación y mantenimiento para la junta administradora de agua potable Andignato (J.A.A.P.A) del caserío Andignato del cantón Cevallos provincia de Tungurahua.(Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil, 2024-08) ;Zamora Llerena, Luis AlbertoCastro Solorzano, Fidel AlbertoThe purpose of this study is to improve the basic drinking water service, providing the sector with preliminary technical studies, since its useful life is over and it is necessary to upgrade the network in question, taking into account the design parameters and the topographic and hydrographic characteristics of the site. The study site belongs to the rural sector, so the CO 10.7 - 602 - Revision NORM was used, focused on the design of drinking water supply for the rural area, data provided by the J.A.A.P.S.A of the Board that manages the network, from continuous visits to the study site and the Development and Land Management Plan of the canton Cevallos 2020 - 2022, statistical data from INEC and various bibliographic sources were used. A topographic survey was carried out with the TRIMBLE M3 station of the municipal entity, later the information was compared with the RTK system for ease of data manipulation and to make it more dynamic, substituting the latter by developing effectively, the hydraulic project was carried out in specific softwars taking into account the design bases of the code; it has topographic plans and design of the network in the first stage, with items that are used in the construction of the system. Finally, with a new projection of the current design for the Drinking Water Supply network, we have sought to provide the vital liquid in a better way and to obtain a good quality of water that solves the users, contributing to improve the quality of life of the sectors.Item type:Ítem, Diseño y construcción de una máquina bordonadora de tanques de acero inoxidable con un sistema hidráulico para incrementar su resistencia en la empresa INOX TEC(Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Mecánica, 2024-02) ;Aviles Brito, Carlos KevinLópez Villacis, Gonzalo EduardoThe metalworking company INOX TEC located in Cunchibamba, in the province of Tungurahua, requires a beading machine for stainless steel sheets and tanks, to improve the properties of said material. It was proposed to design and build a hydraulic beading machine that can perform beading with thicknesses of up to 4 mm in AISI 304 stainless steel. The study was based on bibliographic sources and field studies, the feasibility of implementing the equipment was demonstrated. An efficient mechanical system was selected, appropriate to the productive capacity of the company to guarantee its economic viability, in the same way a hydraulic system was used to facilitate its use. Calculations, designs and machining processes were carried out, plans and computer simulations were prepared. Likewise, studies were carried out after the beading process where AISI 304 stainless steel significantly improves its properties, as well as its hardness and resistance. The hydraulic beading machine offers an ideal and fast solution through the use of a double-acting pneumatic cylinder that allows quick and efficient actuation at the time of beading, as well as a control center through which the process can be managed in a simple way. The materials used and the design of the equipment guarantee its longterm durability and efficiency. This project contributes to the well-being of the company and has the potential to be applied in other similar contexts if required.Item type:Ítem, Análisis del sistema de agua potable enfocado al diseño del tanque de almacenamiento y ampliación de la red de distribución desde la comunidad El Chilco hasta el caserío San Antonio, en el cantón Tisaleo, provincia de Tungurahua(Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil, 2022-03) ;Moreta Capuz, Jonathan StalinCastro Solorzano, Fidel AlbertoThis project is aimed at the design of the reservoir tank and expansion of the distribution network from the El Chilco community to the San Antonio neighborhood located in the San Francisco community, with this study is intended to provide basic drinking water service in quantity and quality to the inhabitants of the sector taking into account the design parameters and the orographic characteristics of the place. Through the field visit, it was determined that the study site belongs to the rural sector; therefore, the CO 10.7 - 602 - Revision NORM was used, which is focused on the design of drinking water supply for the rural area. The study used data provided by the GADM of Tisaleo, Development and Land Use Plan of Tisaleo canton 2014 - 2019, statistical data from INEC and various bibliographic sources. A topographic survey was carried out with the TRIMBLE M3 station of the municipal entity, in order to develop the hydraulic project in Civil 3D, SAP 2000 and EPANET, taking into account the design bases of the code. This research work includes topographic plans and design of the distribution network, as well as items used in the construction of the drinking water supply system. Finally, the expansion of the distribution system is intended to supply quality drinking water to tisaleñas families in an efficient and responsible manner, complying with all the regulations and parameters in force.Item type:Ítem, Diseño de un sistema de abastecimiento de energía eléctrica con el uso de energías alternativas como la hidráulica en viviendas unifamiliares en la parroquia de Montalvo del cantón Ambato, provincia de Tungurahua(Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil, 2021-02) ;Cofre Pinta, Edison FernandoChérrez Gavilanes, Diego SebastiánThe main objective of the work is to provide an optimal and safe design of a totally sustainable and environmentally friendly hydraulic generation system, adjusting to the energy needs of the area under study, taking advantage of modern technology for the generation of clean electricity at a lower cost. In the first instance, the energy consumption of the houses located within the study area was determined, as well as the flow of the “Canal de Regadío Ambato-Huachi - Pelileo”, essential data to start the design of the hydraulic system. The hydraulic system to be implemented is by means of a pico-central of electricity generation based on a gravitational vortex, which generates a rotational movement and according to the input flow it is capable of driving the rotation of a vertical turbine, same as through a generator can be transformed into usable electricity for a home. The entire design is based on simulations and scale models, the simulation is by means of the free engineering software "Ansys Academic Student", both the tank and the turbine are modeled on a real scale to analyze the behavior of the fluid within it and observe the feasibility of formation of a gravitational vortex. The scale model starts from the data of the simulation carried out, but in this the main objective is to find the real efficiency of the energetic system with respect to the calculated theoretical power, thus it can be stated with great certainty the real power that the system will reach in its real size. Finally, the same plans of the structure designed with the corresponding measures and scales, appropriate to the place of implantation, are made, with price analysis and total budget of the hydraulic system.
