Ingeniería Civil y Mecánica

URI permanente para esta comunidadhttp://repositorio.uta.edu.ec/handle/123456789/898

Examinar

Resultados de la búsqueda

Mostrando 1 - 3 de 3
  • Item type:Ítem,
    Diseño y construcción de un banco de pruebas para describir el funcionamiento del mecanismo de GRASHOF para el laboratorio de la carrera de ingeniería mecánica
    (Universidad Técnica de Ambato-Facultad de Ingeniería Civil y Mecánica-Carrera Ingeniería Mecánica, 2026-01-29)
    Durán Chasi José Carlos
    ;
    Carrillo Rosero Carlos Mauricio
    ;
    Universidad Técnica de Ambato-Facultad de Ingeniería Civil y Mecánica-Carrera Ingeniería Mecánica
    The following technical project was developed to meet the Mechanical Engineering Program’s need for a test bench capable of representing a four-bar mechanism, demonstrating two Grashof mechanism types—double rocker and crank-rocker—as well as the non-Grashof configuration. A documentary and field investigation was conducted on commercially available mechanism test benches. Based on these references, materials were adapted to real conditions in the national market. Subsequently, the lengths of the links and the test bench were determined, with the following dimensions: “S” = 150 mm, “P” = 200 mm, “Q” = 270 mm, and “L” = 300 mm. The links and panel were designed and manufactured using acrylic sheets. The links contain 6001‑2RSC3 bearings, and their joints consist of male and female stainless-steel pins with internal N52 neodymium magnets, ensuring strong retention and easy coupling and uncoupling. The panel contains perforations that allow the four kinematic inversions of the system to be recreated, along with additional holes to model other mechanisms. Laboratory practice guides are included in the annexes. When comparing the calculated values with those obtained from the test bench, a difference of 0.1 to 0.5 degrees was observed. This deviation is acceptable, as it results from the user’s inability to perceive such small variations on the panel’s degree scale.
  • Item type:Ítem,
    Diseño y construcción de un mecanismo para el desmontaje de cilindros hidráulicos de diámetro y longitud variable para el taller Trac Service Ramos
    (Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Mecánica, 2024-08)
    Ramos Guerrero, Jessica Fernanda
    ;
    Espín Lagos, Segundo Manuel
    The design and construction of the mechanism for the disassembly of hydraulic cylinders was carried out due to the complexity and high costs involved in the repair process of these components in the Trac Service Ramos workshop. The project was developed in several stages, starting with a review of the historical and technical background of hydraulic cylinders. Subsequently, a comparative analysis of different design alternatives was detailed, evaluating cost, ease of construction and maintenance criteria. Based on the selection of one of them, the conceptual design of the disassembly mechanism was made taking as reference the hydraulic cylinder of the Caterpillar 320DL excavator, the material of each component was specified, strength calculations and cost analysis were made. Finally, drawings and technical specifications were prepared for each part of the mechanism, ensuring its viability and operational efficiency, to finish with tests that included the evaluation of the disassembly capacity of cylinders of different sizes and the resistance of the mechanism under real working conditions. As a result, the implementation of this project facilitates the maintenance of hydraulic cylinders, improves the safety of the technician and reduces the development time of the repair process in the workshop Trac Service Ramos, this new mechanism includes a hydraulic power unit with a pressure of 1500 psi, has a bench with dimensions 2.2 m long and width of 0.61 m presenting a safety factor of 12.70 ensuring the layout and resistance that the structure will have.
  • Item type:Ítem,
    Fabricación del mecanismo de conformado de la punta de un tubo hipodérmico usado en un dispositivo mecánico generador de flujo con presión positiva CPAP usado como alternativa en el tratamiento de pacientes con covid-19
    (Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Mecánica, 2021-09)
    Ramos Freire, Christopher Vicente
    ;
    Morales Criollo, William Mauricio
    ;
    Pérez Salinas, Cristian Fabian
    With the development of the mechanism system for shaping the tip of a hypodermic tube, it will allow the manufacture and adaptation of this fundamental internal element of the respirator, consequently it will help to reduce the time of elaboration and assembly of the same. The methodology of this technical project begins with an evaluation of the information provided by the Mercedes AMG company and the UCL. For the design of the deformation mechanism of hypodermic tubes, SolidWorks software was used, while ANSYS software was used for simulation, in which an analysis of the machine's infrastructure was carried out to determine that there is no overstress and that it may cause failures; likewise, an impact analysis was carried out in a specific contact region, between the tip and the hypodermic tube, based on a height of fall of an element (weight), in order to determine the deformation of the tube. Finally, the construction of the machine was executed. Functional tests were carried out in the laboratory of the Faculty of Civil and Mechanical Engineering, where results of 1.31 mm (average value) of deformation of the hypodermic tube were obtained, tests that were adapted with the simulations carried out, resulting in a correct operation of the mechanism.