Ingeniería Civil y Mecánica

URI permanente para esta comunidadhttp://repositorio.uta.edu.ec/handle/123456789/898

Examinar

Resultados de la búsqueda

Mostrando 1 - 10 de 10
  • Item type:Ítem,
    Análisis hidráulico del régimen de flujo y procesos de socavación en un tramo representativo del Río Napo, Provincia de Napo, mediante modelación numérica
    (Universidad Técnica de Ambato-Facultad de Ingeniería Civil y Mecánica-Maestría Hidráulica Con Mención en Obras Hidráulicas, 2026-06-10)
    López Carrillo Giovanna Patricia
    ;
    Castro Solórzano Fidel Alberto
    ;
    Universidad Técnica de Ambato-Facultad de Ingeniería Civil y Mecánica-Maestría Hidráulica Con Mención en Obras Hidráulicas
    This study analyzes the hydraulic regime and potential scour processes in a representative reach of the Napo River, located in Puerto Napo, Napo Province, Ecuador. The research integrates high-resolution bathymetric and topographic surveys, probabilistic hydrological analysis, hydraulic modeling using HEC-RAS, sedimentological characterization, and multitemporal fluviomorphological assessment. The analyzed reach covers an approximate length of 250 m, referenced between KP 57+290 and KP 57+540. Estimated design discharges were 2614.70 m³/s for a 2-year return period and 5593.30 m³/s for a 25-year return period. Hydraulic modeling showed mean flow velocities of 4.05 m/s and 5.52 m/s, with maximum flood levels of 429.74 m a.s.l. and 431.24 m a.s.l., respectively. Scour estimation for the 2-year return period scenario resulted in depths of 1.04 m using HEC-RAS and 3.02 m using the Lischtvan-Lebediev method, highlighting the sensitivity of scour prediction to the selected method. The multitemporal fluviomorphological analysis identified dominant erosion on the left bank, with an approximate area of 41,625 m², and sediment deposition on the right bank of approximately 33,605 m². The results indicate that the studied reach is characterized by active fluvial dynamics and high-energy hydraulic conditions, emphasizing the importance of numerical modeling for assessing scour processes, morphological evolution, and protection measures in Amazonian rivers.
  • Item type:Ítem,
    Diseño de la red de distribución de agua potable para la junta administradora de agua del Caserío Lacón de la parroquia San Bartolomé de Pinllo, cantón Ambato, provincia de Tungurahua
    (Universidad Técnica de Ambato-Facultad de Ingeniería Civil y Mecánica-Carrera de Ingeniería Civil, 2026-01-27)
    Guerrero Acurio Juan Pablo
    ;
    Guevara Robalino Jorge Javier
    ;
    Universidad Técnica de Ambato-Facultad de Ingeniería Civil y Mecánica-Carrera de Ingeniería Civil
    The purpose of this project is to develop the comprehensive design of the potable water distribution network for the Lacón community, located in the parish of San Bartolomé de Pinllo, Ambato canton. Currently, the community faces deficiencies in the continuity of the potable water service, which has motivated the need to implement a technically updated system in accordance with current regulations. The study was carried out in three main stages. The first consisted of a detailed topographic survey, using GNSS equipment and processing in AutoCAD Civil 3D, which made it possible to obtain contour lines and define the optimal layout of the network. In the second stage, the design parameters were established, including population projections using arithmetic, geometric, and exponential methods; the determination of current and future water demand; and the calculation of the design flows (QMD and QMH), based on actual consumption data provided by the Water Board and in accordance with INEN standards. In addition, a socioeconomic analysis was conducted through user surveys, which revealed that although most residents perceive the service as “good,” issues related to continuity, pressure fluctuations, and isolated turbidity events persist. These findings justify the need for a complete restructuring of the system. In the third stage, hydraulic modeling was carried out using WaterGEMS, validating pressures, velocities, and head losses under maximum daily and maximum hourly flow conditions. The results demonstrated that the proposed network complies with technical requirements, ensuring an efficient and continuous water supply. Finally, the construction plans, referential budget, and technical specifications were developed, consolidating a functional, safe, and sustainable design proposal that meets the present and future needs of the Lacón community.
  • Item type:Ítem,
    Optimización de la red de distribución de agua potable del sector Cruz de Mayo de la junta regional Nueva Vida, cantón Quero, provincia de Tungurahua
    (Universidad Técnica de Ambato-Facultad de Ingeniería Civil y Mecánica-Carrera de Ingeniería Civil, 2026-01-14)
    Arroba Sánchez Kevin Giovanni
    ;
    Soria Pugo María Gabriela
    ;
    Universidad Técnica de Ambato-Facultad de Ingeniería Civil y Mecánica-Carrera de Ingeniería Civil
    The present degree work was carried out in the Cruz de Mayo neighborhood, located in the Quero canton, in the province of Tungurahua. The potable water distribution system currently operating in this sector was built approximately 40 years ago, without prior technical studies or formal planning processes. Initially, the infrastructure was designed solely to supply the Cruz de Mayo and San Antonio neighborhoods; however, over time it was expanded empirically to also provide water to the Yayulihui neighborhood. In the specific case of Cruz de Mayo, the system serves 143 users, which has generated operational limitations: excessively high pressures in the final sections, low pressures in critical points, reduced velocities that promote sedimentation, and in general, a performance that does not respond to the current demographic growth. These conditions justify the need to optimize the system, and this project represents the first technical step toward achieving it. To address this, information was collected regarding the physical and operational conditions of the main components: the chlorination tank, storage tank, pipeline network, pressurereducing tanks, and valves. This assessment made it possible to identify natural infrastructure deterioration and the points where system operation is compromised. Additionally, a topographic survey was carried out through photogrammetry, enabling the generation of a 4.3 km² surface model and the georeferencing of system elements and household connections. The hydraulic parameters required for modeling were also compiled, including pipeline diameters and layout through field inspections, and demands obtained from monthly consumption records. With this information, a hydraulic model of the existing system was developed using WaterCAD software, allowing for an evaluation of its real performance. The results show that only 59.46% of the nodes operate within the normative pressure range, and only 8.89% of the pipes present adequate velocities, confirming the need for technical intervention. Based on this diagnosis, two optimization alternatives were proposed. The first maintains most of the existing infrastructure and intervenes only in the most critical sectors, achieving an optimization of 37.31% of the system. This proposal significantly improves hydraulic parameters, reaching 90.48% of nodes within the normative range and 32% of pipes operating with adequate velocities. The second alternative proposes a redesign of the layout, relocating the network towards public roads in accordance with current regulations. This approach xviii requires intervening 85.86% of the system and results in 92.86% of nodes within the permitted pressure range and 38.78% of pipes operating at adequate velocities.
  • Item type:Ítem,
    Optimización del sistema de distribución de agua potable del barrio “Cuilche Miño”, cantón Latacunga para garantizar la eficiencia del servicio
    (Ingeniería Civil y Mecánica. Carrera Ingeniería Civil, 2025)
    Toaquiza Pila Anderson Israel
    ;
    Maldonado Narváez Lenin Rafael
    This technical project was carried out in the neighborhood of Cuilche Miño, located in the parish of San Juan de Pastocalle, Latacunga canton, Cotopaxi province. The potable water distribution system (PWDS) in the area was built in 2003 to serve 95 users; however, it currently supplies 225 users, far exceeding its original design capacity. This situation, along with the imminent end of the system’s design life (25 years) and the unplanned expansions executed without technical oversight, has led to operational deficiencies such as overpressures, low flow velocities, and inadequate service quality. Therefore, a detailed study and a viable solution for this sector became necessary. The process began with the collection of baseline information, including a topographic survey using RTK and a detailed inventory of the existing infrastructure. Subsequently, the entire hydraulic infrastructure of the network was evaluated to determine its current condition. Additionally, through computational hydraulic modeling under static and dynamic conditions, deficiencies such as overpressures, inadequate velocities, and critical nodes were identified. Finally, an optimization proposal was developed, based on regulatory criteria, which included a detailed hydraulic design, unit price analysis, and a referential investment budget. The diagnostic phase identified physical deterioration in key components of the system. The hydraulic modeling showed overpressures in most nodes and low velocities in a large portion of the network. As a result, a comprehensive redesign of the PWDS was proposed, with a 25- year design period and a projected future population of 1242 inhabitants. The new network includes 12.78 km of PVC pipelines, covering a total area of 180 hectares. Furthermore, efficient performance was achieved: 98% of nodes and over 78% of pipelines operate within the technical parameters established by national regulations, effectively controlling overpressures and excessive velocities to ensure a high-quality, continuous, and sustainable service for the Cuilche Miño neighborhood.
  • Item type:Ítem,
    Mejoramiento del sistema de agua potable en la comunidad Jaloa el Rosario de la parroquia La Matriz del cantón Quero, provincia de Tungurahua
    (Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil, 2025-02)
    Pallo Vinueza, Gerson Asdrubal
    ;
    Castro Solorzano, Fidel Alberto
    The supply of drinking water is of vital importance to all inhabitants worldwide, so the supply must be efficient and adequate, but currently the existing distribution system in the Jaloa el Rosario community does not provide the adequate service that users need, since the distribution system has fulfilled its useful life, therefore, the proposal to improve the drinking water system was made. It began with the delimitation of the study area that was facilitated by the president of the Jaloa el Rosario community, to later carry out a topographic survey with a drone, a survey was also carried out where the population registry was updated, through the survey carried out the quality of the service was also known and to know if the pressure of the water with which it reaches their homes is adequate, on the other hand, through field visits each of the components of the existing drinking water system was evaluated, through the evaluation it was determined that the system has many deficiencies since visible leaks could be seen in the pipes. Through the use of a pressure gauge, a hydraulic evaluation was carried out, where the existing pressures were measured. Finally, a proposal for improvement of the SDAP was developed, so that community users have a safe and efficient service, where the design period is 25 years, with a future population of 735 inhabitants. On the other hand, the design proposal was also modeled through an engineering program, modeling the system in a static and dynamic state. After the design proposal was made, a reference budget was developed for an amount of $135,167.90 US dollars, with its respective schedule where it is presented that for the construction of the design proposal it will be developed in a time of 5 months.
  • Item type:Ítem,
    Optimización del sistema de distribución de agua potable del barrio Mariscal Sucre Los Puentes, parroquia Saquisilí, cantón Saquisilí, provincia de Cotopaxi
    (Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil, 2024-08)
    Calvopiña Tenorio, Cristian Andrés
    ;
    Peñafiel Valla, Lourdes Gabriela
    Currently, the SDAP of the town is nearing the end of its 30 years design period. This has caused the system to present deficiencies and deterioration, causing overpressure and leaks, compromising the quality, quantity and continuity of the water supply. In addition, population growth and expansion have generated a deficient distribution of the network. Therefore, a proposal was developed to guarantee efficient use of the resource by improving and optimizing the system. This began with a comprehensive evaluation of the network, technically analyzing its physical condition by recording technical and hydraulic data sheets using a pressure gauge to measure pressure efficiency. The population register was updated by means of surveys to diagnose overcrowding, socioeconomic and sanitary conditions. Subsequently, a topographic survey was carried out using the photogrammetry technique. After data collection, the infrastructure was modeled and the system was analyzed using simulation software under static and dynamic conditions. The critical scenario of maximum hourly consumption was considered and the characteristic consumption pattern of the area was determined. The results indicated the need for a complete redesign. The improvement proposal contains the diagnosis of the current deficiencies, design of a system to meet future needs for the 30 years period, implementation of water quality improvements, optimization of the hydraulic parameters of the network, and cost-effective solutions.
  • Item type:Ítem,
    Mejoramiento de la red de distribución de agua potable para optimizar la calidad sanitaria del caserío El Rosal del cantón Mocha, provincia de Tungurahua
    (Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil, 2024-01)
    Guashpa Lema, Danny Miguel
    ;
    Paredes Beltrán, Bolívar Eduardo
    Due to the need of the inhabitants to have a drinking water supply system, important to improve the quality of life, the necessary studies are carried out for the correct supply of the vital liquid throughout the sector. The design of the proposal for a drinking water distribution system was carried out and the evaluation of the existing network was carried out, current information was collected from the areas involved, such as: population, topographic survey, survey of the current network, approximate pipe diameters. , distribution flow and dimension of the existing storage tank, in order to determine its current situation, where the new flow determined through the respective calculations will travel, including a storage tank that can fulfill the projected requirements, complying with the current rules and regulations. The drinking water distribution network and the storage tank were designed for a period of 30 years. The evaluated network has sections of galvanized iron pipe, segments with PVC pipe and branches with black hose. The new network is designed entirely of PVC pipes of different diameters with a total of 7,032 kilometers, which were modeled and calculated by specialized software. The projected flow to supply the population corresponds to 3.67 lt/sec. and as products, plans of the distribution system, the storage tank, reference budget, unit price analysis, technical specifications and an estimated work schedule were generated.
  • Item type:Ítem,
    Optimización y mejoramiento de la red de conducción de agua potable para los habitantes: Carmelitas, San Carlos y Nuevos Horizontes usuarios de la junta administradora de agua potable nuestra señora de la elevación de Santa Rosa del cantón Ambato provincia de Tungurahua
    (Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil, 2022-09)
    Chacha Jumbo, Ronald Fabricio
    ;
    Chuncha Simbaña, Víctor Efraín
    ;
    Núñez Aldás, Galo Wilfrido
    This technical project is aimed at solving the problems of functioning and operation of the JAAPNSE conduction network, with this work is intended to ensure a constant water conduction service that improves the quality of life of users. To this purpose, we proceeded to evaluate the existing conduction system by applying a qualitative approach through observation cards that allowed recording the state of the conduction network components, as well as a quantitative approach mainly oriented to simulate the current network through hydraulic modeling software to obtain values of pressures, velocities and contrast them with the current Ecuadorian regulations; the evaluation allowed identifying the real operating conditions of the system. With this, the conduction network was redesigned based on the current operating problems, as well as a new design period, considering the parameters and recommendations established in the standards CPE INEN 5 PARTE 9-1:1992, CPE INEN 5 PARTE 9-2:1997 and the NORMAS DE DISEÑO DE SISTEMAS DE AGUA POTABLE – EMAAP-Q. As a result, a technical proposal was elaborated consisting of plans, calculation memory, reference budget, price analysis and technical specifications, these documents guarantee the correct construction process and functionality of the system that would benefit a total of 3646 people, with a horizon to the year 2052.
  • Item type:Ítem,
    Modelación hidráulica para la determinación de la eficiencia de los sumideros tipo T45 modificado con barrotes circulares de aguas lluvias
    (Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil, 2020)
    Bustamante Matehu, Milton Armando
    ;
    Maldonado Narvaez, Lenin Rafael
    In this project, the main objective is to determine the most efficient collection scenario within the city roads, a different geometry was used than the one used in the regulations of Ecuador respecting the parameters that it imposes. The use of T45 sinks with circular bars is established in compliance with the country's standards, which were modeled on a 1: 4 scale in carbon fiber, located on an acrylic platform that simulates a half way, and alternating the number of these; On the platform we present two scenarios, the first one at ground level and the second one located at 1.75 centimeters above the road, as it is at a 1: 4 scale. Data collection was carried out in the laboratory of the Faculty of Civil and Mechanical Engineering, this model presents dynamic, geometric and kinematic similarity. Thirty-six combinations of longitudinal slope and transverse slope are established, and eight combinations of analysis based on previous research. Having as longitudinal slopes two and four percent and as cross slopes 0.5 percent, 4 and 8 percent. Outstanding geometry and determine the hydraulic efficiency; the results found establish that the elevation scenarios increase or decrease the efficiency according to the combination of the slope where they are located, the most efficient elevation being the one that presents four sinks with 0.5 percent longitudinal slope and 4 percent transverse slope with an efficiency of 91 percent.
  • Item type:Ítem,
    Modelación hidráulica para la determinación de la eficiencia de los sumideros tipo T45 modificado con barrotes longitudinales de aguas lluvias
    (Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil, 2020)
    Robalino Lara, Mariela Monserrath
    ;
    Maldonado Narvaez, Lenin Rafael
    The main objective of this project is to determine the efficiency of storm drain inlets located on urban roads – our proposed curb inlets were designed with an alternate geometry to the conventional models and complying with the parameters established in current regulations of Ecuador. The experimental platform of the curb inlet frames symbolizes a half way at 1: 4 scale representing the geometric, kinematic and dynamic similarity of the hydraulic model. The model was built at the Laboratory of Hydraulics of the Faculty of Civil and Mechanical Engineering using acrylic as the main material. Several scenarios of curb inlets with longitudinal bars distributed in different positions were studied. Additionally, different rain water flows were considered by combining the longitudinal slope of 2-4 percent and the transverse slope of 0.5-4-8-12 percent. The experimental study was developed in two phases; Phase I includes the location of the curb inlets with a 0.00 level, reaching the maximum efficiency of 84 percent with four curb inlets with a longitudinal and transverse slope of 0.5 and (2-4) respectively. Phase II examines the curb drains with a level + 1.75cm above the level of the road, obtaining the highest efficiency of 75 percent with four curb inlets (drains), combining the longitudinal and transverse slope of 12 and 2 percent respectively.