Diseño de la red de distribución de agua potable para la junta administradora de agua del Caserío Lacón de la parroquia San Bartolomé de Pinllo, cantón Ambato, provincia de Tungurahua
Date
2026-01-27
Authors
Journal Title
Journal ISSN
Volume Title
Publisher
Universidad Técnica de Ambato-Facultad de Ingeniería Civil y Mecánica-Carrera de Ingeniería Civil
Abstract
The purpose of this project is to develop the comprehensive design of the potable water
distribution network for the Lacón community, located in the parish of San Bartolomé de Pinllo,
Ambato canton. Currently, the community faces deficiencies in the continuity of the potable water
service, which has motivated the need to implement a technically updated system in accordance
with current regulations.
The study was carried out in three main stages. The first consisted of a detailed topographic
survey, using GNSS equipment and processing in AutoCAD Civil 3D, which made it possible to
obtain contour lines and define the optimal layout of the network. In the second stage, the design
parameters were established, including population projections using arithmetic, geometric, and
exponential methods; the determination of current and future water demand; and the calculation of
the design flows (QMD and QMH), based on actual consumption data provided by the Water Board
and in accordance with INEN standards.
In addition, a socioeconomic analysis was conducted through user surveys, which revealed that
although most residents perceive the service as “good,” issues related to continuity, pressure
fluctuations, and isolated turbidity events persist. These findings justify the need for a complete
restructuring of the system. In the third stage, hydraulic modeling was carried out using
WaterGEMS, validating pressures, velocities, and head losses under maximum daily and maximum
hourly flow conditions. The results demonstrated that the proposed network complies with
technical requirements, ensuring an efficient and continuous water supply. Finally, the construction
plans, referential budget, and technical specifications were developed, consolidating a functional,
safe, and sustainable design proposal that meets the present and future needs of the Lacón
community.
Description
El presente proyecto tiene como finalidad desarrollar el diseño integral de la red de distribución
de agua potable del Caserío Lacón, perteneciente a la parroquia San Bartolomé de Pinllo, cantón
Ambato. Actualmente, la comunidad presenta deficiencias en continuidad del servicio de agua
potable, lo que motivó la necesidad de plantear un sistema técnicamente actualizado y acorde con
la normativa vigente.
El estudio se ejecutó en tres etapas principales. La primera consistió en un levantamiento
topográfico detallado, empleando equipos GNSS y procesamiento en AutoCAD Civil 3D, lo que
permitió obtener curvas de nivel y definir el trazado óptimo de la red. En la segunda etapa se
establecieron los parámetros de diseño, incluyendo proyecciones poblacionales mediante métodos
aritmético, geométrico y exponencial; determinación de la dotación actual y futura; y el cálculo de
los caudales de diseño (QMD y QMH), con base en los consumos reales proporcionados por la Junta
Administradora y en la normativa INEN.
Además, se realizó un análisis socioeconómico mediante encuestas a los usuarios, lo que
evidenció que, aunque la mayoría percibe el servicio como “bueno”, persisten problemas en
continuidad, presión y episodios aislados de turbidez. Estos hallazgos justificaron la necesidad de
una reestructuración completa del sistema.
En la tercera etapa se efectuó la modelación hidráulica utilizando WaterGEMS, verificando
presiones, velocidades y pérdidas de carga en condiciones de caudal máximo diario y máximo
horario. Los resultados demostraron que la red propuesta cumple con los parámetros técnicos,
asegurando un suministro eficiente y continuo. Como último, se elaboraron los planos
constructivos, el presupuesto referencial y las especificaciones técnicas, consolidando una
propuesta de diseño funcional, segura y sostenible para satisfacer las necesidades presentes y
futuras de la comunidad del Caserío Lacón
Keywords
AGUA POTABLE, MODELACIÓN HIDRÁULICA, WATERGEMS, LEVANTAMIENTO TOPOGRÁFICO
Citation
Universidad Técnica de Ambato-Facultad de Ingeniería Civil y Mecánica-Carrera de Ingeniería Civil