Ingeniería Civil y Mecánica
URI permanente para esta comunidadhttp://repositorio.uta.edu.ec/handle/123456789/898
Examinar
4 resultados
Resultados de la búsqueda
Item type:Ítem, Evaluación de la viabilidad y diseño técnico para la sinergia de un sistema fotovoltaico y gestión de la demanda en la optimización energética del edificio de la FICM, Universidad Técnica de Ambato(Universidad Técnica de Ambato-Facultad de Ingeniería Civil y Mecánica-Carrera de Ingeniería Mecánica, 2026-07-08) ;Amores Bastidas Jennyfer Carolina ;Yunapanta Velastegui José LuisUniversidad Técnica de Ambato-Facultad de Ingeniería Civil y Mecánica-Carrera de Ingeniería MecánicaThis research addresses energy optimization in the higher education sector, a highly relevant topic due to the severe electricity crisis and energy rationing currently facing Ecuador. The study focuses on the technical design and viability assessment of a 47.7 kWp photovoltaic microgrid with storage, coupled to the FICM building at the Technical University of Ambato. The scientific novelty and main proposal of this work lie in the conceptualization of a hybrid model capable of completely eradicating the need to activate the Perkins 1104A-44TG1 combustion generator—located adjacent to the classrooms—during low-water periods (estiaje). By delegating the electrical contingency to the lithium battery bank, the harmful mechanical impact caused by the thermal engine operating under low load is eliminated, and the local emission of noise and polluting gases is mitigated. Methodologically, the work began with a quantitative load diagnosis, recording a base consumption of 168.83 kWh/day, followed by detailed stochastic modeling in the specialized software PVsyst V8.1.1 using irradiation data from Meteonorm 8.2. The project aligns directly with the institutional research line of renewable energies, energy efficiency, and environmental sustainability. The proposal concludes with robust economic viability and financial engineering, backed by a Net Present Value (NPV) of $31,185.40 USD, an Internal Rate of Return (IRR) of 14.85%, and an optimized payback period of 6.5 years, while dually mitigating 22.42 tons of CO₂ annuallyItem type:Ítem, Evaluación del potencial de energía hidrocinética para generación eléctrica en el río Mocha, provincia de Tungurahua, Ecuador(Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica. Maestría en Hidráulica con mención en Obras Hidráulicas., 2025) ;Palacios Carranza Alex FabiánContreras Vásquez Luis FelipeThis study addresses the sustainable utilization of the Mocha River’s water resource, located in Tungurahua Province, Ecuador, aiming to generate small-scale hydropower. Historical flow data from the Mocha-Quero-Ladrillos irrigation board were analyzed, revealing significant seasonal variations: maximum flows of 0.472 m³/s occur from March to June, while the minimum recorded flow is 0.273 m³/s in September. A gross head of 50 meters was determined, and through an analysis of friction losses and turbine selection, the Pelton turbine proved to be the most suitable for the local conditions. The hydraulic and electrical efficiencies were then calculated, resulting in an overall system efficiency of 72.9%. Using this efficiency, the effective power output was estimated on a monthly basis, ranging from 97.5 kW (in September) to 168.6 kW (from March to June). The findings demonstrate the technical and energetic feasibility of implementing a small hydropower station along the Mocha River. Furthermore, this project can enhance local electricity supply and promote rural sustainable development by efficiently and responsibly managing water use, as the diverted flow is returned to the irrigation canal after power generation. This integrated approach fosters diversification of the energy matrix and strengthens the region’s energy resilience.Item type:Ítem, Análisis del comportamiento estructural mediante el uso de aisladores sísmicos y disipadores de energía en un edificio de estructura metálica, aplicando la norma NEC-15(Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica. Maestría en Ingeniería Civil con Mención en Estructuras Metálicas, 2022-08) ;Beltrán Vargas, Luis Miguel ;López Arboleda, Gissela VanessaLópez Velástegui, Jorge EnriqueIn this project there is the need of understanding the dynamical behavior of the building, so there are three structural models that are presented, the first model consisted in an analysis of a conventional building. In the second and third models, seismic isolators and energy dissipators were incorporated, respectively, taking into consideration the criteria of the Ecuadorian Construction Standard (NEC 15), American Society of Civil Engineers (ASCE 7-16, ASCE 41-13), American Institute of Steel Constructions (AISC 341-16). In the first stage of the analysis, the structure was analyzed and balanced, applying the recommendations of the NEC-15. Once the building was stabilized, the analysis of the conventional structure was carried out in order to determine floor drifts and displacements. Subsequently, the pre-dimensioning and corresponding design of the base seismic isolators was carried out, which were considered as elastomeric type devices with a lead core. In the third model, the design of the energy dissipators was carried out. With the necessary information, the values were entered into the calculation program to carry out the study of the structuralxv models. Once the structural model was generated in the software, data from the accelerograms were entered in order to perform a nonlinear dynamic time-history analysis, and a complementary nonlinear static analysis was performed. With the information entered in the software, the results for the first structural model were obtained, among the main results obtained from the structural package are: the floor drifts, displacements, displacement diagrams, energy balance diagrams, results of lateral loads, among others. In the same way, those analyses were developed in the structural models with the base isolation and energy dissipation devices, which, once the required results were obtained, a comparative analysis of the structural behavior was carried out, taking as main parameters of consideration the floor drifts, displacements obtained and energy balances.Item type:Ítem, Diseño y construcción de un sistema de control para un generador de energía renovable híbrido eólico-fotovoltaico ubicado en el sector de río Blanco comunidad de Yatzaputzán provincia de Tungurahua(Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Mecánica, 2020) ;Aldaz Toaza, Alexis AbrahamCarrillo Rosero, Carlos MauricioThis technical project was carried out considering the importance of implementing a control system for a hybrid wind-photovoltaic renewable energy generator, and in this way obtain better energy storage for the sector Rio Blanco Yatzaputzán community in Tungurahua. The project is based on the design, construction and performance tests, for this reason, the different parameters for operation from energy sources such as solar panels and wind generator were investigated. In the theoretical and analytical part, the selection of a data achievement card was made according to the control parameters, besides, the program and the connections of the components that are capable of controlling the charge and discharge of the batteries were designed. In addition, the system has the function of controlling water heating for domestic use. The main parts of the system are: batteries, solar panels, wind generator, solar thermal tanks, electrical and temperature sensors, Contactors, electromagnetic actuators, electronic devices, etc. This study was designed with the aim of improving the life of the equipment by preventing overcharging and excessive discharge of batteries, heating of electronic components, and keep the water temperature between 25 to 30 celcius, Also, a data storage system was incorporated that will facilitate the research carried out by students and teachers to know the potential of the sector. Finally, the system was built with materials available in the market and that have an accessible cost for their respective construction.
