Ingeniería Civil y Mecánica
URI permanente para esta comunidadhttp://repositorio.uta.edu.ec/handle/123456789/898
Examinar
5 resultados
Resultados de la búsqueda
Item type:Ítem, Evaluación del efecto de los agregados de asfalto reciclado en las propiedades físico-mecánicas de las mezclas asfálticas en caliente(Universidad Técnica de Ambato-Facultad de Ingeniería Civil y Mecánica-Carrera de Ingeniería Civil, 2026-07-03) ;Montesdeoca Chafla Camila MonserrathAcosta Lozada Rodrigo IvánThis research evaluated the effect of incorporating recycled asphalt pavement (RAP) aggregates on the physical-mechanical and volumetric properties of hot mix asphalt using the Marshall method. The study was conducted using a comparative experimental approach structured in three phases: characterization of the stone materials; design of conventional and modified asphalt mixtures using the Marshall method; and analysis of the properties in relation to the optimal asphalt cement content, in accordance with standard MOP-001-F-2002. For the experimental work, stone aggregates were collected from the Kumochi Mine, recycled stone aggregates (RAP) obtained from the milling of the Jaloa–El Guasmo road in Quero Canton, and AC-20 asphalt binder from the JEAL Construcciones plant. Two types of mixtures were designed: a conventional mixture consisting of 100% new aggregates and a modified mixture containing 20% RAP, both of which meet the requirements and demonstrate feasibility for use in the design of asphalt pavements for heavy traffic. This study addresses the need to optimize material resources and reduce the environmental impact caused by the extraction of virgin aggregates for road infrastructure without altering its structural design. The percentage of residual asphalt binder in the recycled aggregates was determined, yielding a value of 5.69%, which intrinsically translates to 1.14% equivalent to 20% RAP in the mixture. Using the Marshall method, the optimal asphalt binder content was determined for both mixtures, yielding a value of 6.20%. Analysis of their properties concluded that the incorporation of 20% RAP results in increased stability compared to the conventional mixture. Conversely, the flow decreased but remains within the range required by MOP-001-F-2002, which indicates that the mixture is sufficiently rigid to prevent rutting while resisting plastic deformations caused by traffic loads. It is concluded that the incorporation of recycled material improved the performance of its properties in the mix design, making it technically viable and capable of withstanding traffic loads.Item type:Ítem, Evaluación de las propiedades mecánicas de un pavimento flexible tradicional y un pavimento flexible combinado con asfalto reciclado y escoria de siderurgia entre las calles Corazón y Cordillera Occidental del cantón Ambato de la provincia de Tungurahua.(Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil, 2025-02) ;Vallejo Espín, Byron EduardoChérrez Gavilanes, Diego SebastiánIn Ecuador's steel industry, large quantities of steel slag are generated annually, leading to considerable environmental pollution. To mitigate this impact, the incorporation of recycled materials into asphalt mixtures was proposed, including reclaimed asphalt pavement (RAP) and slag as a polymer, aiming to achieve environmental benefits and improve pavement quality. The research was divided into three phases. The first phase involved identifying the extraction sites of materials such as bitumen, aggregates, and recycled materials. In the second phase, the materials underwent characterization tests, including particle size analysis, aggregate density, abrasion tests, Rice test, and the Marshall method. The latter was used to evaluate the stability and flow of briquettes. The experimental design included steel slag and RAP combined with optimal asphalt content (5.5, 6.0, and 6.5 percent). Slag partially replaced fine aggregates (passing the No. 4 sieve), while RAP partially replaced intermediate coarse aggregates (half-inch sieve, retained on the No. 4 sieve). Combinations of 7 percent slag with 10 percent RAP, 10 percent slag with 20 percent RAP, and 13 percent slag with 30 percent RAP were tested. In the third phase, a comparative analysis was conducted based on Marshall criteria between traditional and modified mixtures. The results showed that modified asphalt mixtures with 6.5 percent AC-20 content, incorporating 7 percent slag and 10 percent RAP, and 10 percent slag and 20 percent RAP, as well as those with 6.0 percent AC-20 content, incorporating 13 percent slag and 30 percent RAP, outperformed or equaled traditional mixtures in terms of strength, durability, and environmental sustainability. These mixtures present themselves as a stronger and more eco-friendly alternative for road infrastructure projects.Item type:Ítem, Evaluación del comportamiento de las propiedades mecánicas del asfalto utilizando ceniza de cáscara de nuez con asfalto reciclado(Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil, 2025-02) ;Viteri Lascano, Ana MichelleGuevara Robalino, Jorge JavierThe incorporation of recycled materials in asphalt mixtures represents an innovative and sustainable alternative to reduce global pollution, aiming to offer benefits both in pavement quality and environmental preservation. This approach also contributes to waste reduction, optimizes the use of natural resources, and promotes more environmentally friendly and responsible construction practices in the long term. This process was developed in three stages. In the first, the appropriate site for collecting materials was selected. In the second, the materials were subjected to various tests, such as granulometry, abrasion, the Rice test, and the Marshall method, in order to evaluate their properties of stability, flow, air voids, and asphalt-filled voids. For the design, walnut shell ash and RAP were added, using optimal asphalt contents of 5.5, 6.0, and 6.5 percent. The walnut shell ash partially replaced the fine aggregate passing through the No. 4 sieve, while RAP partially replaced the intermediate aggregate of 3/8, passing through the half-inch sieve and being retained on the No. 4 sieve. Thus, walnut shell ash and RAP were incorporated in proportions of 7 percent ash – 10 percent RAP, 10 percent ash – 20 percent RAP, and 13 percent ash – 30 percent RAP. In the third phase, a comparative analysis of the modified asphalt mixtures and the conventional mixture was conducted using the Marshall method criteria. The results showed that, by incorporating walnut shell ash and RAP in the mentioned proportions, most of the tests did not meet the mechanical property ranges of the mixture compared to the traditional one, concluding that the modified mixture does not outperform the conventional one in terms of resistance, durability, and environmental sustainability.Item type:Ítem, Evaluación de las propiedades mecánicas asfálticas modificadas con polvo de gres porcelánico en pavimentos flexibles reciclados(Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil, 2024-08) ;Delgado Lucio, Jennifer JohannaBayas Altamirano, Myriam MarisolThe integration of recycled materials into asphalt mixtures is an innovative solution to reduce global pollution, seeking to provide benefits both in pavement quality and in improving the environment. It was divided into three phases, the first was based on identifying the site for the extraction of the materials. In the second, the materials were subjected to tests such as: granulometry, abrasion, rice test and Marshall method to analyze stability and flow properties. For the design, stoneware and RAP were added, plus the optimal asphalt content of 5.5, 6.0 and 6.5 percent. The porcelain stoneware partially replaced the fine aggregate when passing the No. 4 sieve and being retained in the No. 50, on the other hand, the RAP partially replaced the 3/8" intermediate aggregate when passing the 1/2" sieve and being retained in No. 4. Consequently, stoneware and RAP were partially incorporated with percentages of 7 stoneware – 10 RAP, 10 stoneware – 20 RAP and 13 stoneware – 30 RAP. Finally, in the third, a comparative analysis was carried out according to the Marshall criteria between the modified asphalt mixtures and the traditional mixture. These phases resulted in incorporating stoneware and RAP with percentages of 7 stoneware – 10 RAP, 10 stoneware – 20 RAP and 13 stoneware – 30 RAP, plus 6.5 percent asphalt, improving the mechanical properties of the mixture compared to the traditional mixture, concluding that the modified asphalt mixture surpasses the traditional one in terms of resistance, durability and environmental sustainability.Item type:Ítem, Análisis del comportamiento del asfalto reciclado mezclado con vidrio de la vía Cevallos – Mocha en el tramo km 0 + 000 al km 3 + 306 de la provincia de Tungurahua(Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil, 2024-02) ;Fernández López, Jorge EstuardoBayas Altamirano, Myriam MarisolCurrently, various techniques are used for the design of asphalt mixtures; however, in Ecuador, the implementation of materials such as crushed glass and asphalt pavement has not been fully accepted. The current project aims to analyze asphalt mixtures with partial substitution of these recycled materials, addressing both the environmental and economic aspects. Therefore, we started with a preliminary study where we collected data on the road under study and basic information on the incorporation of RAP and crushed glass, tests were carried out on the stone aggregates and recycled materials in order to evaluate their quality and determine their mechanical properties, 15 conventional briquettes were made, Through the Marshall method, an optimum percentage of asphalt was obtained, allowing to obtain an adequate asphalt mixture that served as a base to substitute the proportions of the materials in question, four design alternatives of asphalt mixtures were executed, which had different percentages of crushed glass and recycled asphalt. The first three alternatives worked with the optimum AC-20 content of the conventional asphalt mix, while for the last alternative an optimum content of 6.65 percent AC-20, 4.82 percent RAP and 4.42 percent crushed glass was determined. All the asphalt mixes were evaluated using parameters established by the MOP-001-F-2002 standard. As a result, and in compliance with the last objective of the project, the respective master formulas were established for each asphalt mix design executed.
