Ingeniería Civil y Mecánica
URI permanente para esta comunidadhttp://repositorio.uta.edu.ec/handle/123456789/898
Examinar
3 resultados
Resultados de la búsqueda
Item type:Ítem, Diseño de un plan de conservación de la estructura de la capa de rodadura de la vía Pinguilí-Rosal-Yanahurco en el tramo de la ABSCISA K4+000 a K8+000 perteneciente al cantón Mocha, provincia de Tungurahua(Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil, 2023-09) ;Oleas Córdova, Iván MoisésAldás Sánchez, Milton RodrigoSeeing and understanding that the section of road studied is not in an optimal state, thus hindering access, communication, and connectivity in the area, with this technical project we seek to propose a conservation plan for the structure of the layer rolling. For this, first, a georeferenced survey was carried out, using RTK, with this we determined the dimensions of the road, in addition to highlighting key points, such as ditches, storm sewers and other sections. Subsequently, a manual count and typing of the vehicles was carried out, a process that was carried out for a week in a period from 06:00 to 18:00, for the subsequent calculation of the TPDA. As a next step, we proceeded with the taking of soil samples, making test pits, which were excavated two for each kilometer of track studied, the material obtained was transferred to the laboratory to be later tested. A visual inspection of the road was carried out, a process with which we identified and classified the different types of damage existing in the surface layer to determine PCI. After that, the respective test was carried out with the Benkelman beam whose main objective is to determine the deflections of the pavement. With all the processes carried out previously, we came to establish that the road needs routine maintenance that will help prolong its useful life, helping to maintain in optimal condition such a vital heritage for the interconnection of the parishes.Item type:Ítem, Correlación entre el CBR y las propiedades índice y mecánicas en suelos granulares, de la parroquia Huambaló del cantón San Pedro de Pelileo, provincia de Tungurahua(Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil, 2022-09) ;Guato Recalde, Joyce RosangelaPérez Maldonado, Ruth LorenaThe present experimental work focuses on the analysis of the soils of the Huambaló parish, through correlations of the California Bearing Ratio (CBR), Dynamic Cone Penetration (DCP), Modified Proctor, Liquid Limit, Plastic Limit, Granulometry, Specific Gravity and Field Density tests, which allow defining the index and mechanical properties of the soil. Once the study area was covered, 12 sectors were established in which rectangular pits of 1.50 m x 1.50 m and 1.00 m deep were made, from which altered samples were extracted for subsequent analysis in the laboratory. Once the tests were completed, the results were tabulated and interpreted, achieving relevant correlations between the index and the mechanical properties of the soils under study, with acceptable R2 squared coefficients of determination and a good degree of reliability. Finally, the flexible pavement was designed, using the CBR determined in the laboratory, and also the CBR calculated by correlations, obtaining the same thicknesses in both cases, confirming the reliability of the correlations performed, with results that are intended to help reduce costs and speed up work times on site.Item type:Ítem, Correlación entre el CBR y las propiedades índice y mecánicas en suelos granulares, de las parroquias Los Andes y El Sucre del cantón Patate, provincia de Tungurahua(Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil, 2022-01) ;Pilla Ortega, Lenin AndrésAldáz Sánchez, Milton RodrigoThe present experimental work aims to determine the correlation between the CBR and the index and mechanical properties in granular soils of Los Andes and El Sucre parishes of Patate canton, Tungurahua province, through in situ and laboratory tests, to This was done by taking 12 soil samples, through test pits regulated according to AASHTO T 87-70, located in the different main roads of the parishes under study. Field and laboratory tests were carried out to determine the characteristics of each type of soil extracted, once the tests are completed, the results are tabulated and interpreted, reaching relevant correlations between the index and mechanical properties of the soils under study, with determination coefficients ere (R) squared acceptable and with a good degree of reliability. Finally, with the result obtained through the correlations proposed in the present experimental work, it is intended to help optimize the time on site, contribute to the development of the database regarding correlation studies between CBR and index and mechanical properties of granular soils at Parish, Cantonal and Provincial level, as well as to guide in the preliminary design of flexible pavements in the parishes under study
