Ingeniería Civil y Mecánica

URI permanente para esta comunidadhttp://repositorio.uta.edu.ec/handle/123456789/898

Examinar

Resultados de la búsqueda

Mostrando 1 - 2 de 2
  • Item type:Ítem,
    Análisis del comportamiento a flexión del hormigón reforzado con fibras plásticas (polipropileno) después de las altas temperaturas
    (Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil, 2023-09)
    Murillo Estrada, Ariel Mateo
    ;
    Ramírez Cabrera, Wladimir José
    Reinforced concrete is one of the most widely used structural elements in Ecuadorian constructions. By the fourth quarter of 2022, 79.5 percent of the material present in the structure was registered, that is, the predominant material in the country. Being so widely used, the question arose how high temperatures affect simple concrete compared to fiber-reinforced concrete. The present work studied the influence of polypropylene fibers in plain concrete after being affected at high temperatures. Obtaining a correct dosage was achieved by analyzing the characteristics of the fine and coarse aggregates, then the required resistance was verified by means of the compression test in cylindrical specimens for resistances of 210 and 240 kg/square centimeters. Once the resistance was obtained, beam-type test tubes of dimensions 10x10x35 centimeters were made where 2 dosages were used with respect to the macrofiber with 0 and 3 kg/cubic meters. After curing the specimens for 28 days, they were subjected to different temperatures: 20, 100, 280 and 600 degrees Celsius. Subsequently, the respective flexural tests (ASTM 1609) were carried out, for the elaboration of the stress vs. deflection graph where the behavior of the concrete without fibers and with fibers was compared. The comparison of the resistances and the addition of fibers in the specimens allowed us to verify the influence of these at high temperatures, improving their resistance to flexion at all exposure temperatures.
  • Item type:Ítem,
    Análisis del comportamiento a flexión de vigas de hormigón reforzado con fibras de polipropileno / polietileno”
    (Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil, 2023-01)
    Mera Ortiz, Roger Ricardo
    ;
    Ramírez Cabrera, Wladimir José
    The addition of fibers in concrete represents a new technique aimed at improving the tensile behavior developed by simple concrete, although its use is relatively new, more and more research seeks to characterize how fibers influence the concrete properties. The present degree work studied the influence of polypropylene/polyethylene fibers (Tuf Strand SF) in concrete. The characterization of the properties of the aggregates are necessary to get the dosage of the concrete, using a resistance of 240 kg/cm2 to compression. Dosages of 3 and 6 kg/m3 of fiber and simple concrete were used to get a comparative analysis, making a total of 27 50x15x15cm beams according to the recommendations of ASTM 1609 standard. Once the results were obtained, the Load vs. Deflection graphs were prepared to compare deflections, residual strengths and fracture energy between the different volumetric fractions. The study of fiber distribution was carried out by counting fibers, in specified areas, of the semi-sections of the specimens, obtaining the orientation coefficient by areas and total. The comparison of the performance of simple and fiber-reinforced concrete allowed us to verify that the addition of fibers in the concrete improves its ductility and the fiber count corroborated the influence of the "Wall Effect" on the distribution of fibers in the concrete matrix.