Ingeniería Civil y Mecánica

URI permanente para esta comunidadhttp://repositorio.uta.edu.ec/handle/123456789/898

Examinar

Resultados de la búsqueda

Mostrando 1 - 4 de 4
  • Item type:Ítem,
    Análisis comparativo del comportamiento a flexión entre vigas de hormigón armado elaboradas con agregado grueso natural y reciclado
    (Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil, 2024-08)
    Sánchez Balseca, Alison Odalis
    ;
    Navarro Peñaherrera, Carlos Patricio
    The construction industry has had a significant impact on the environment due to the emission of greenhouse gases and the extraction of natural resources. Reinforced concrete, essential in construction, combines iron and cement, improving mechanical strength. In response, sustainable practices such as the recycling of construction materials have been promoted. This research analyzes the performance of reinforced concrete using recycled materials from construction and demolition waste, evaluating the feasibility of replacing natural coarse aggregate with recycled aggregate. Flexural tests were performed on reinforced concrete beams, comparing the mechanical properties of beams with natural and recycled aggregates. The beams with natural aggregate withstood a maximum load of 21.56 kN and presented a modulus of rupture of 5627.47 MPa, while the beams with recycled aggregate reached a maximum load of 19.62 kN and a modulus of rupture of 5120.80 MPa. The maximum displacement was 49.52 mm for beams with natural aggregate and 22.28 mm for those with recycled aggregate, showing greater ductility in the former. The recycling and reuse of materials in construction, in the production of new concrete with recycled aggregate, not only reduces the environmental impact and the demand for natural resources, but also makes it possible to contribute to the sustainable development objectives (Objective 11) in terms of innovation of materials and sustainable cities and communities. The implementation of an efficient sorting and recycling system is essential to reuse waste as raw material in the manufacture of new building materials, promoting a more sustainable construction.
  • Item type:Ítem,
    Evaluación de la resistencia a flexión de vigas de hormigón armado preparado con agregado grueso reciclado y adicionando catalizador agotado de craqueo catalítico fluidizado
    (Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil, 2024-08)
    Álvarez Martínez, John Anderson
    ;
    Navarro Peñaherrera, Carlos Patricio
    Due to the existing environmental problems in the construction industry, the use of recycled coarse aggregates was chosen for the production of reinforced concrete beams. In this way, this research focused on the design of beams with which the flexural resistance was determined, with the compressive strength of the concrete used being 280 kilograms per square centimeter, adding spent catalyst from fluidized catalytic cracking as a partial substitute. of fine aggregate by 5 and 10 percent, and completely replacing conventional coarse aggregate with crushed coarse aggregate from recycled concrete elements. For this project, physical and mechanical tests were carried out on both natural aggregates and substitute aggregates, in the case of recycled coarse aggregate and spent catalyst, following the technical standards in force in Ecuador (NTE-INEN). In this way, the flexural strength of reinforced concrete beams prepared with recycled coarse aggregate and spent catalyst from fluidized catalytic cracking was evaluated. Substitute materials were obtained and tests required under the regulations were carried out, both on recycled aggregates and on natural aggregates. The results showed that the beams with 10 percent spent catalyst from fluidized catalytic cracking replacing the fine aggregate and coarse aggregate recycled from crushed concrete elements, presented a greater flexural strength at 28 days compared to the beams with 5 percent replacement and those made with conventional materials.
  • Item type:Ítem,
    Diseño de adoquines con mezcla asfáltica en frío utilizando agregados reciclados y no reciclados
    (Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil, 2020)
    Ushiña Toapanta, Jessica Magaly
    ;
    Portilla Yandún, Favio Paúl
    In this study about cold asphalt mixtures we determined the optimal percentage of asphalt emulsion analyzing the by Marshall stability test, also the performance to the compressive strength and finally to determinate the costs of manufacture of cobblestones with recycled and unrecycled aggregates for light and low traffic applications. In order to determine the parameters mentioned in the previous paragraph, it was necessary to test several test tube finding an optimal percentage of 10.5 percent for mixtures with recycled materials and 10.3 percent for non-recycled materials and stability of 5250 pounds - 4984 pounds respectively, for the test, 30 cobblestones were made as experiments, corresponding to two types of mixtures with three thicknesses of 6 cm, 7 cm and 8 cm, in order to choose the thickness that the best resistance has for both recycled and unrecycled materials. The maximum strengths obtained in the experiments were 38.84 Kg / cm2 for recycled materials and 37.66 Kg / cm2 for non-recycled ones. Due to the result of the strengths, the decision was taken to work with the experiment made with recycled materials of 6cm thick. In addition, an analysis of the final cost of the product was analyzed, giving as a result in a cost of USD 0.24 for cobblestones with recycled materials and USD0.39 for nonrecycled ones, which means that, the selected cobblestone is economically much lower than a traditional cobblestone which costs USD 0.35.
  • Item type:Ítem,
    Diseño de adoquines con mezclas asfálticas en caliente utilizando agregados reciclados y no reciclados
    (Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil, 2020)
    Aysabucha Yucailla, Katherin Liliana
    ;
    Portilla Yandún, Favio Paúl
    To make pavers with hot asphalt mixtures with recycled aggregates, samples of aggregates from Dr. Julio Enrique Paredes Street were taken, which were obtained through a milling process, and then a cracking process was carried out to perform the tests. The percentage of residual asphalt of the recycled aggregates was determined by the asphalt extraction test in which a percentage of 5.8% of asphalt cement was determined, then a granulometric analysis was performed to determine the particle size, reaching a particle size. Maximum size of half an inch. In order to make the cobblestones with unrecycled aggregates, crushed aggregates of the Los Pinos Mine were acquired, and it was carried out with a granulometry of maximum size of half an inch. The Marshall test was carried out to determine the optimum percentage of asphalt cement needed by our hot mixes and in this way we proceeded to manufacture pavers of 8, 7 and 6 cm. Cobblestones with recycled asphalt mixtures were tested 2 days after they were made, and concrete pavers were tested after 28 days to reach maximum strength. An articulated pavement was designed with pavers of hot asphalt mixtures with recycled aggregates, knowing the values of the thicknesses of each layer that forms an articulated pavement the cost analysis of articulated pavements with pavers of hot asphalt mixtures was performed, which He noticed a low value with respect to simple concrete pavers.