Ingeniería Civil y Mecánica

URI permanente para esta comunidadhttp://repositorio.uta.edu.ec/handle/123456789/898

Examinar

Resultados de la búsqueda

Mostrando 1 - 2 de 2
  • Item type:Ítem,
    Análisis comparativo de parámetros técnicos económicos de edificaciones de 3 pisos con pórticos especiales a momento de acero estructural y de hormigón armado
    (Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica. Maestría en Ingeniería Civil con Mención en Estructuras Metálicas, 2025-12-03)
    Cárdenas Arias, Walter Paúl
    ;
    Flores Gordillo, Guillermo Alejandro
    This project is being carried out in Ambato city, parish of Santa Rosa, starting with two three-story architectural models, for which structural calculations are performed using the two most commonly used structural systems in the field: reinforced concrete and structural steel, in both cases using special moment frames. The comparison made on the same architectural model shows the amount of material used when choosing a structural system, as well as the cost of each one. The result was a similarity in the percentage variation, since for the architectural model analyzed, in both cases the concrete has a cost close to thirty-two percent of the value of the structural steel construction.
  • Item type:Ítem,
    Implementación del proceso de conservación de la estructura de la capa de rodadura de la vía Ambato – Quisapincha en el tramo km 6+400 al km 9+600 de la provincia de Tungurahua
    (Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil, 2022-09)
    Cárdenas Arias, Walter Paúl
    ;
    Chérrez Gavilanes, Diego Sebastián
    This Technical Project was developed with the purpose of implementing a road maintenance plan for the conservation of the wearing course of the AmbatoQuisapincha Road, in order to extend the useful life of the road and provide future solutions. The project began with a georeferenced survey using a tape measure and GPS, obtaining 332 points along the 3200m of the section under study, which helped us to develop a digital model of the survey. The Annual Average Daily Traffic (AADT) was carried out through a manual vehicular count for seven days in a row at intervals of twelve hours a day and obtaining a future design AADT of 5,412 vehicles per day. To determine the types of faults located on the road, the Pavement Condition Index or PCI method was applied, analyzing 17 sections, giving us a result of 47.5, which indicates a regular condition of the road. Likewise, the Bekelman Beam test was carried out, which allows analyzing the static deflections of the pavement structure, obtaining a TYPE I because the characteristic deflections are less than the admissible deflections, the behavior of the subgrade being good. Likewise, for the classification and determination of the behavior of the soil, four test pits were drilled, obtaining CBR values greater than 8, defining a fair to good subgrade. Finally proposing routine maintenance to save the optimal state of the road surface.