Caracterización de las propiedades mecánicas del material híbrido utilizando matriz epóxica reforzada con tejido de fibra vegetal de algodón y fibra natural de abacá
No Thumbnail Available
Date
2017
Journal Title
Journal ISSN
Volume Title
Publisher
Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica. Carrera de Ingeniería Mecánica
Abstract
This experimental research is based on the characterization of the hybrid material
of epoxy matrix reinforced with layers of structured woven of abaca fibers and cotton in different orientations and with varied volumetric fractions, the purpose of the study is to obtain the best characterization of the material containing the
best mechanical properties.
In this work the stratification process was used for compression to obtain the
hybrid material, it was to establish the definitive percentage volumetric fractions
of reinforcements, material thickness and number of layers of reinforcement of woven. Of all the characterizations made determined group of specimens that
exhibits the best mechanical properties tests standardized under the ASTM standards. (ASTM D3039-00 traction, flexion ASTM D7264-07 and impact ASTM D5628-10).
The analysis of three types of trials determined that the hybrid material presented
better mechanical properties corresponds to the case 3 which has a volumetric fraction of 75% resin Epoxy (matrix), 18.25% abaca fiber and 6.75 percent cotton (reinforcements).
Description
La presente investigación experimental se basa en la caracterización del material
híbrido de matriz epóxica reforzado con capas de tejido plano estructurado de fibras de abacá y algodón en diferentes orientaciones y con variadas fracciones volumétricas, el fin del estudio es obtener la mejor caracterización del material
que contenga las mejores propiedades mecánicas.
En este trabajo se utilizó el proceso de estratificación por compresión para obtener
el material híbrido, se llegó a establecer las fracciones volumétricas porcentuales
definitivas de los refuerzos, espesor del material y número de capas de refuerzo de tejido plano. De todas las caracterizaciones realizadas se determinó el grupo de probetas que exhibe las mejores propiedades mecánicas mediante ensayos
normalizados bajo la normativa ASTM. (Tracción ASTM D3039-00, Flexión
ASTM D7264-07 e Impacto ASTM D5628-10).
Del análisis realizado de los tres tipos de ensayos se determinó que el material híbrido que presentó mejores propiedades mecánicas corresponde al caso 3 el cual tiene una fracción volumétrica de 75% resina epóxica (matriz), 18,25% fibra de abacá y 6,75% fibra de algodón (refuerzos).
Keywords
MATERIAL HÍBRIDO, FRACCIÓN VOLUMÉTRICA, ESTRATIFICACIÓN POR COMPRESIÓN, ASTM, RESINA EPÓXICA, FIBRA DE ABACÁ, CORTE DE MATERIALES