Análisis comparativo de la resistencia mecánica de hormigones reforzados con fibra de vidrio y polipropileno

dc.contributor.advisorMedina Robalino Wilson Santiago
dc.contributor.authorLara Erazo José Eduardo
dc.contributor.editorUniversidad Técnica de Ambato-Facultad de Ingeniería Civil y Mecánica-Carrera de Ingeniería Civil
dc.date.accessioned2026-07-03T22:19:54Z
dc.date.issued2026-07-03
dc.descriptionEl hormigón es uno de los materiales de construcción más empleados a nivel mundial; sin embargo, su baja resistencia a la tracción y su tendencia a la fisuración constituyen limitaciones que han impulsado el estudio de alternativas de refuerzo. El presente trabajo experimental analiza el comportamiento mecánico del hormigón de f'c = 210 kg/cm² reforzado con fibra de vidrio tipo E y fibra de polipropileno al 0,5% del volumen de la mezcla, en el cantón Ambato, provincia de Tungurahua. La investigación se estructuró en tres fases. La primera comprendió la caracterización física de los agregados y la dosificación por el método ACI 211.1. La segunda fase consistió en la elaboración y ensayo de probetas cilíndricas y vigas, evaluando compresión, flexión y tracción indirecta. La tercera fase incluyó un análisis de precios unitarios comparativo para las tres dosificaciones. Los resultados a los 28 días mostraron que en resistencia a compresión la mezcla patrón alcanzó 226,64 kg/cm², la fibra de vidrio 222,82 kg/cm² y la fibra de polipropileno 178,25 kg/cm², siendo esta última la única que no superó el f'c de diseño. En flexión, la fibra de polipropileno obtuvo el mayor incremento con 37,15 kg/cm² (24,00% sobre el patrón), mientras que la fibra de vidrio alcanzó 33,21 kg/cm² (10,85% sobre el patrón). En tracción indirecta, la fibra de polipropileno registró 20,18 kg/cm² y la fibra de vidrio 18,88 kg/cm², ambas superiores a la mezcla patrón de 17,07 kg/cm². El análisis económico estableció costos de $121,95/m³ para la mezcla patrón, $150,14/m³ con fibra de vidrio y $176,79/m³ con fibra de polipropileno. Se concluye que la fibra de vidrio al 0,5% es la alternativa técnica y económicamente más viable, al ser la única dosificación que cumple con el f'c de diseño en compresión y mejora simultáneamente las propiedades mecánicas a flexión y tracción indirecta.
dc.description.abstractConcrete is one of the most widely used construction materials in the world; however, its low tensile strength and tendency to crack represent technical limitations that have driven the study of reinforcement alternatives. This experimental study analyzes the mechanical behavior of concrete with a compressive strength of f'c = 210 kg/cm² reinforced with type E glass fiber and polypropylene fiber, both at 0.5% of the mix volume, in the canton of Ambato, province of Tungurahua. The research was structured in three phases. The first phase involved the physical characterization of the aggregates and mix design using the ACI 211.1 method. The second phase consisted of the preparation and testing of cylindrical specimens and beams, evaluating compressive strength, flexural strength, and indirect tensile strength. The third phase included a comparative unit cost analysis for the three mix designs. The results at 28 days showed that in compressive strength, the control mix reached 226.64 kg/cm², glass fiber reached 222.82 kg/cm², and polypropylene fiber reached 178.25 kg/cm², the latter being the only mix that did not meet the design f'c. In flexural strength, polypropylene fiber achieved the highest value at 37.15 kg/cm² (24.00% above the control), while glass fiber reached 33.21 kg/cm² (10.85% above the control). In indirect tensile strength, polypropylene fiber recorded 20.18 kg/cm² and glass fiber 18.88 kg/cm², both exceeding the control mix value of 17.07 kg/cm². The economic analysis established production costs of $121.95/m³ for the control mix, $150.14/m³ with glass fiber, and $176.79/m³ with polypropylene fiber. It is concluded that glass fiber at 0.5% is the most technically and economically viable alternative, as it is the only mix design that meets the design compressive strength and simultaneously improves both flexural and indirect tensile mechanical properties.
dc.identifier.citationUniversidad Técnica de Ambato-Facultad de Ingeniería Civil y Mecánica-Carrera de Ingeniería Civil
dc.identifier.urihttps://repositorio.uta.edu.ec/handle/123456789/47109
dc.language.isoes
dc.publisherUniversidad Técnica de Ambato-Facultad de Ingeniería Civil y Mecánica-Carrera de Ingeniería Civil
dc.subjectHORMIGÓN REFORZADO CON FIBRAS
dc.subjectFIBRA DE VIDRIO
dc.subjectFIBRA DE POLIPROPILENO
dc.subjectRESISTENCIA MECÁNICA
dc.subjectANÁLISIS DE COSTOS
dc.titleAnálisis comparativo de la resistencia mecánica de hormigones reforzados con fibra de vidrio y polipropileno
dc.typebachelorThesis

Archivos

Bloque original

Mostrando 1 - 1 de 1
Cargando...
Miniatura
Nombre:
Tesis I.C 2174 Lara Erazo Jose Eduardo.pdf
Tamaño:
5,35 MB
Formato:
Adobe Portable Document Format

Bloque de licencias

Mostrando 1 - 1 de 1
Cargando...
Miniatura
Nombre:
license.txt
Tamaño:
1,71 KB
Formato:
Item-specific license agreed upon to submission
Descripción: