Diseño de perfiles conformados en frio de sección UV, de acero ASTM A36 utilizados para la construcción de torres de telecomunicaciones.
No Thumbnail Available
Date
2024-10
Authors
Journal Title
Journal ISSN
Volume Title
Publisher
Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica. Maestría en Ingeniería Civil con Mención en Estructuras Metálicas
Abstract
It is a challenge for engineering to modernize telecommunications structures by improving their strength and reducing failure rates under higher wind loads. It is
essential to deepen the understanding of the behavior of these structures. The objective
of this research was to design a UV-shaped profile in ASTM A36 cold-formed steel,
in accordance with AISI 100-16 standards, for application in telecommunications
towers.
During the development of the project, it was analyzed whether there was a reduction
in the effective area following the parameters of the AISI S902 standard, comparing
these results with a mathematical model and conducting laboratory tests.
As a result, no reduction in the effective area was observed in the UV profiles; in the
tests, which are the most accurate method, no significant change was detected. This
information was corroborated through hypothesis testing. On the other hand, the
design of these profiles was optimal, and their strength meets the applied methodology.
A wind load of 1500 kgf was assumed, which pushed a section of a triangular crosssection tower to its limit, achieving a demand-capacity ratio of 87 percent, demonstrating
that the UV-shaped profile is suitable for structural use.
Finally, following the AISI 100-16 methodology allowed for the establishment of criteria for efficient design, providing specific guidelines that ensure the profiles meet
the safety and performance standards required for use in telecommunications towers.
It was identified that UV-shaped profiles offer good performance in terms of structural
strength, making them an efficient and economical option for this type of structure.
Description
Es un desafío para la ingeniería, la cual busca modernizar las estructuras de
telecomunicaciones, mejorando su resistencia, los índices de fallos ante cargas de
viento que son mayores, y se hace imprescindible profundizar los conocimientos
acerca del comportamiento de las mimas; el objetivo de la presente investigación fue
diseñar el perfil tipo UV en acero ASTM A36 conformado en frio bajo la normativa
AISI 100-16 en torres de telecomunicación.
En el desarrollo de proyecto, se analizó si existe reducción del área efectiva siguiendo
los parámetros de la norma AISI S902 comparando estos resultados con un modelo
matemático y realizando ensayos de laboratorio.
Como resultado no existió una reducción del área efectiva en los perfiles UV, en los
ensayos por ser el método de mayor precisión no hubo un cambio representativo, esta
información se corroboró con una prueba de hipótesis, por otra parte, el diseño de estos
perfiles fue óptimo, la resistencia cumple con la metodología aplicada, se asumió una
fuerza de viento de 1500 Kgf, llevando al límite a un tramo de una torre de sección
triangular, se obtuvo una demanda capacidad del 87 por ciento, siendo el perfil UV
perfecto para el uso estructural. Finalmente, siguiendo la metodología AISI 100-16 permitió establecer los criterios
para un diseño eficiente, ofreciendo directrices específicas para garantizar que los
perfiles cumplan con los estándares de seguridad y desempeño, exigidos para el uso
en torres de telecomunicación, asegurando una resistencia adecuada bajo diversas
condiciones de carga, se identificó que los perfiles tipo UV ofrecen un buen
desempeño en términos de resistencia estructural, lo que los convierte en una opción
eficiente y económica.
Keywords
AISI 100-16, AISI S902, ÁREA EFECTIVA, CONFORMADO EN FRIO, PERFIL UV, TORRES DE TELECOMUNICACIONES