Diseño estructural del edificio de la empresa pública municipal de agua potable y alcantarillado del cantón San José De Chimbo (EP – MAPA - CCH)
No Thumbnail Available
Date
2022-09
Authors
Journal Title
Journal ISSN
Volume Title
Publisher
Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil
Abstract
Since the public company EP-MAPA-CCH does not have its own facilities, the
structural design of a building is proposed. In this technical project, the bibliographic,
deductive and analytical research method was applied, as well as descriptive and
applied research. Based on the technical analysis and architectural design provided by
the institution, the design of a reinforced concrete structure was carried out, for which
a Moment-resisting frame systems with sagging beams was selected and gravity loads,
overloads, seismic loads for a structure of normal occupancy and pre-design of
structural elements were determined; parameters that allowed modeling the structure
in a structural analysis and design software where the behavior of the structure was
observed by performing the linear dynamic analysis, and the structural elements of the
structure and foundation were also designed. For the validation of the design, the
seismic-resistant requirements and design considerations specified in the following
standards were verified: NEC-SE-CG-15, NEC-SE-DS-15, NEC-SE-HM-15, AISC
360-10, AISC 341-10, ASCE-SEI 7-16 and ACI 318-19. Concluding that the structure
will behave safely in the event of a seismic event.
Description
Debido a que la empresa pública EP-MAPA-CCH no cuenta con las instalaciones
propias se propone el diseño estructural del edificio. En el presente Proyecto Técnico
se aplicó el método de investigación bibliográfico, deductivo y analítico, así como
también la investigación descriptiva y aplicada. En base al análisis técnico y diseño
arquitectónico proporcionados por la institución se realizó el diseño de una estructura
de hormigón armado, para lo cual se seleccionó un sistema de pórticos resistentes a
momento con vigas descolgadas y se determinó cargas gravitacionales, sobrecargas,
cargas sísmicas para una estructura de ocupación normal y prediseños de elementos
estructurales; parámetros que permitieron modelar la estructura en un Software de
análisis y diseño estructural donde se observó el comportamiento de la misma
realizando el análisis dinámico lineal, además se diseñó los elementos estructurales de
la estructura y cimentación. Para la validación del diseño realizado se verificaron los
requerimientos de sismo resistencia presentados y consideraciones de diseño que se
encuentran especificados en las normativas: NEC-SE-CG-15, NEC-SE-DS-15, NECSE-HM-15, AISC 360-10, AISC 341-10, ASCE-SEI 7-16 y ACI 318-19. Concluyendo
que la estructura se comportará de manera segura ante un evento sísmico.
Keywords
DISEÑO ESTRUCTURAL, ANÁLISIS LINEAL, DISEÑO SISMORRESISTENTE, HORMIGÓN ARMADO, SAN JOSÉ DE CHIMBO