Desarrollo de un plan de mantenimiento preventivo y predictivo mediante la distribución de WEIBULL para las Inyectoras horizontales de polímeros en la empresa Ingeniería Diseño de Suelas

dc.contributor.advisorCastro Miniguano, Byron Christian
dc.contributor.authorFreire Pérez, Fernando Isidro
dc.date.accessioned2019-08-03T19:43:29Z
dc.date.available2019-08-03T19:43:29Z
dc.date.issued2019
dc.descriptionEl presente trabajo técnico se desarrolla en base a las necesidades de llevar un mantenimiento preventivo y predictivo adecuado para las inyectoras de polímeros en la empresa de “Ingeniería Diseño de Suelas”, con la finalidad de disminuir los tiempos de reparación producidos por las fallas ocasionadas en los componentes de las máquinas y así poder evitar los paros innecesarios en la producción y en el inyectado de las suelas de zapatos. Para el desarrollo del plan se tomaron datos estadísticos de actividades de mantenimiento realizados con anterioridad, los cuales nos permitieron identificar mediante una matriz AMFE, los componentes más críticos o los más propensos a sufrir fallos. Posteriormente con los datos recolectados se procedió a realizar el análisis estadístico mediante la distribución de WEIBULL de cada máquina inyectora, tanto el modelo matemático como el modelo gráfico, calculando la confiabilidad de los datos que poseen un 95% de veracidad, debido a que el método WEIBULL permite dar un criterio más relevante sobre en qué posición de la curva de la bañera se encuentran las máquinas y las acciones pertinentes que se deben realizar para evitar los fallos. Para llevar a cabo el presente proyecto se utilizó las NTP 331 y NTP 679 para el análisis WEIBULL y AMFE respectivamente, posteriormente se realizó las gamas de mantenimiento preventivo de cada mes para así llevar el control organizado del mismo evitando así paros innecesarios que perjudiquen el buen funcionamiento de las máquinas.es_ES
dc.description.abstractThe present technical work is developed based on the needs of carrying an adequate preventive and predictive maintenance for the injectors of polymers in the company of "Ingenieria Diseño de Suelas", with the purpose of diminishing the times of repair produced by the failures caused in the components of the machines and thus be able to avoid the unnecessary stops in the production and in the injected of the soles of shoes. For the development of the plan, statistical data of maintenance activities previously carried out were taken, which allowed us to identify, through an AMFE matrix, the most critical components or the most prone to failures. Subsequently, with the collected data, the statistical analysis was carried out by means of the WEIBULL distribution of each injector machine, both the mathematical model and the graphic model, calculating the reliability of the data that have a 95% truthfulness, because the method WEIBULL allows to give a more relevant criterion on which position of the curve of the bathtub are the machines and the pertinent actions that must be carried out to avoid the failures. To carry out this project, NTP 331 and NTP 679 were used for the WEIBULL and AMFE analyzes respectively, after which the preventive maintenance ranges were carried out each month to keep the organized control of the same, thus avoiding unnecessary stoppages that harm the good operations of the machines.es_ES
dc.identifier.urihttp://repositorio.uta.edu.ec/handle/123456789/30012
dc.language.isospaes_ES
dc.publisherUniversidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Mecánicaes_ES
dc.rightsopenAccesses_ES
dc.subjectMANTENIMIENTO PREVENTIVOes_ES
dc.subjectWEIBULLes_ES
dc.subjectINYECTORAS HORIZONTALESes_ES
dc.subjectPOLÍMEROSes_ES
dc.subjectFICHAS TÉCNICASes_ES
dc.subjectMÁQUINAS Y HERRAMIENTASes_ES
dc.subjectMATRIZ AMFEes_ES
dc.subjectGAMAS DE MANTENIMIENTOes_ES
dc.subjectNORMAS DE SEGURIDADes_ES
dc.subjectMONTAJE Y FUNCIONAMIENTOes_ES
dc.titleDesarrollo de un plan de mantenimiento preventivo y predictivo mediante la distribución de WEIBULL para las Inyectoras horizontales de polímeros en la empresa Ingeniería Diseño de Suelases_ES
dc.typebachelorThesises_ES

Archivos

Bloque original

Mostrando 1 - 1 de 1
Cargando...
Miniatura
Nombre:
Tesis I. M. 542 - Freire Perez Fernando Isidro.pdf
Tamaño:
7,09 MB
Formato:
Adobe Portable Document Format
Descripción:
TESIS A TEXTO COMPLETO

Bloque de licencias

Mostrando 1 - 1 de 1
Cargando...
Miniatura
Nombre:
license.txt
Tamaño:
1,71 KB
Formato:
Item-specific license agreed upon to submission
Descripción: