Análisis y diseño de un edificio con aisladores sísmicos utilizando el programa ETABS

dc.contributor.advisorRamírez Cabrera, Wladimir José
dc.contributor.authorChimbo Chacha, Washington Joel
dc.date.accessioned2022-08-08T23:18:39Z
dc.date.available2022-08-08T23:18:39Z
dc.date.issued2022-07
dc.descriptionPara la elaboración de este proyecto se identificó la diferencia de comportamiento dinámico de estructuras de: base fija y con aislamiento, para ello se planteó como objetivo analizar y comparar el comportamiento sísmico entre ellas. Se evaluó esta investigación sobre el diseño de los aisladores de base, observando el comportamiento de los siguientes parámetros: derivas, participación de masas, periodo de vibración, aceleraciones y cortantes. A través del prediseño se procedió con el modelado de los dos edificios mediante el uso de un software apropiado para el análisis, realizando el análisis lineal modal espectral para la edificación de base fija mediante el uso del espectro de diseño NEC – 15; para el caso del sistema con aislamiento se realizó el análisis no lineal tiempo historia, considerando el sismo máximo probable para lo cual se utilizaron acelerogramas apropiados y ajustados de acuerdo a la zona y al tipo de suelo. Se concluye que la implementación de aisladores sísmicos a una estructura de base fija, proporciona un mejor comportamiento estructural durante un sismo debido al amortiguamiento brindado por estos dispositivos, obteniendo desplazamientos relativos de pisos mucho menores, por lo tanto, la estructura con aisladores de base puede permanecer operativa y con daños mínimos o nulos en comparación a una estructura con sistema estructural de pórticos de base fija.es_ES
dc.description.abstractFor the development of this project, the difference in the dynamic behavior of fixed and isolated structures was identified. the difference in dynamic behavior of structures with: fixed base and with isolation, for this purpose, the objective was to analyze and compare the seismic behavior between them. This research was evaluated on the design of base isolators, observing the behavior of the following parameters: drifts, mass participation, vibration period, accelerations and shear. Through the pre-design, we proceeded with the modeling of the two buildings by using appropriate software for the analysis, performing the linear modal spectral analysis for the fixed base building by using the NEC - 15 design spectrum; for the system with isolation, the nonlinear time-history analysis was performed, considering the maximum probable earthquake, for which appropriate accelerograms were used and adjusted according to the area and type of soil. It is concluded that the implementation of seismic isolators to a fixed base structure, provides a better structural behavior during an earthquake due to the damping provided by these devices, obtaining much smaller relative displacements of floors, therefore, the structure with base isolators can remain operative and with minimum or null damages in comparison to a structure with a structural system of fixed base frames.es_ES
dc.identifier.urihttps://repositorio.uta.edu.ec/handle/123456789/35594
dc.language.isospaes_ES
dc.publisherUniversidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civiles_ES
dc.rightsopenAccesses_ES
dc.subjectSISMICIDADes_ES
dc.subjectAISLADORES SÍSMICOSes_ES
dc.subjectESTRUCTURAS CONVENCIONALESes_ES
dc.subjectAISLADORES DE BASEes_ES
dc.subjectAISLADORES ELASTOMÉRICOSes_ES
dc.titleAnálisis y diseño de un edificio con aisladores sísmicos utilizando el programa ETABSes_ES
dc.typebachelorThesises_ES

Archivos

Bloque original

Mostrando 1 - 1 de 1
Cargando...
Miniatura
Nombre:
Tesis I.C. 1587 - Chimbo Chacha Washington Joel.pdf
Tamaño:
7,47 MB
Formato:
Adobe Portable Document Format
Descripción:
TESIS A TEXTO COMPLETO

Bloque de licencias

Mostrando 1 - 1 de 1
Cargando...
Miniatura
Nombre:
license.txt
Tamaño:
1,71 KB
Formato:
Item-specific license agreed upon to submission
Descripción: