Vulnerabilidad sísmica del parqueadero municipal del Gobierno Autónomo Descentralizado de Ambato, ubicado en la calle Cuenca y Montalvo
No Thumbnail Available
Date
2022-09
Authors
Journal Title
Journal ISSN
Volume Title
Publisher
Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica. Maestría en Ingeniería Civil con Mención en Estructuras Metálicas
Abstract
Ecuador is located in the ring of fire, so different earthquakes at various levels are very
common, the structures must be designed to withstand an earthquake of a rare level,
the constructions must be ductile; the ductility is the time that the occupants of the
structures have to be able to go out to a safe place, the secondary waves of the
earthquakes are the ones that knock down the buildings, through the present study a
building located in the central area of Ambato was taken as a sample , this structure
should be in a life safety acceptance criteria, to start the present study the forms
established by FEMA 154 and NEC 2015 were used and a visual inspection of the
structure was carried out to know the irregularities in plan and elevation, In addition
to knowing pathologies that the structure has, the main pathology is the short column,
the parameters of the forms were established and it was concluded that it has a medium
seismic vulnerability, with this information a nonlinear static analysis was carried out,
it was necessary to use a computer program such as Etabs19, where the steel area was
placed in each of the beams and columns, with this information formation we obtainedxxiv
the plastic hinges, as well as the performance point and the capacity of the building
under study, in which it was observed that the structure does not meet this acceptance
criterion for the design earthquake, which is why it is necessary to carry out a
reinforcement in beams, but above all in C2 columns, which are the columns that act
the most in these two buildings. There are several methodologies for reinforcing
structures among the most common (reinforcement with carbon fiber, reinforcement
with screeding of structural elements and reinforcement with steel), reinforcement
with angles and plates of A36 steel was chosen, these angles fastened with plates and
bolts they help to gain ductility and more shear strength of the structure in order to
meet the acceptance criteria for this type of building, which is life safety.
Description
El Ecuador se encuentra situado en el cinturón de fuego, por lo que es muy común
distintos sismos a varios niveles, las estructuras deben ser diseñadas para soportar un
sismo de nivel raro, deben ser dúctiles; la ductilidad es el tiempo que tienen los
ocupantes de las estructuras para poder salir a un lugar seguro, las ondas secundarias
de los sismos son las que tumban los edificios, mediante el presente estudio se tomó
como muestra un edificio ubicado en el casco central de Ambato, esta estructura
debería estar en un criterio de aceptación seguridad de vida, para iniciar el presente
estudio se utilizaron los formularios establecidos por la FEMA 154 y la NEC 2015 y
se realizó una inspección visual de la estructura para conocer las irregularidades en
planta y elevación, además de conocer las patologías que tiene la estructura, la
principal es la columna corta, se establecieron parámetros para los formularios y se
concluyó que tiene una vulnerabilidad sísmica media, con esta información se procedió
a realizar un análisis estático no lineal y fue necesario utilizar un programa
computacional, donde se colocó el área de aceros en cada una de las vigas y columnas,xxii
con esta información obtuvimos las rótulas plásticas, así como el punto de desempeño
y la capacidad del edificio en estudio, en lo cual se observó que la estructura no cumple
con este criterio de aceptación para el sismo de diseño, motivo por el cual es necesario
realizar un reforzamiento en vigas pero sobre todo en columnas C2 que son las
columnas que más actúan en estas dos edificaciones. Existe varias metodologías de
reforzamiento de estructuras entre las más comunes (con fibra de carbono, recrecido
de elementos estructurales y con acero), se escogió uno con ángulos y platinas de un
acero A36, los mismos que se encuentran sujetados con platinas y pernos ayudan a
ganar ductilidad y más resistencia al corte de la estructura con el objetivo de cumplir
con los criterios de aceptación para este tipo de edificios que son seguridad de vida.
Keywords
ACEROS, ANÁLISIS NO LINEAL, ANÁLISIS SÍSMICO, ÁNGULOS, CARGA GRAVITACIONAL, CRITERIOS DE ANÁLISIS, DUCTILIDAD, PARÁMETROS DE DISEÑO, PLATINAS, REFORZAMIENTO DE VIGAS