Diseño y construcción de una matriz en el proceso de inyección de tapas de garrafones de agua de 20 lt, en la empresa Coviplast
No Thumbnail Available
Date
2017-08
Authors
Journal Title
Journal ISSN
Volume Title
Publisher
Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica. Carrera de Ingeniería Mecánica
Abstract
This project was developed in the city of Ambato in the company "COVIPLAST",
the interest of the company for the construction of this matrix lies in the need to
produce a new product.
For the design of the matrix should be considered different parameters such as:
material to be injected, the injection machine to be used, the characteristics of the
product to be developed, the materials to be used in the construction of the Matrix.
The design starts with the calculation of number of cavities, then with the
conFiguration of the matrix, calculation of the injection pressure and closing force,
then the mould holder was selected. The sizing and resistance test of the plates is
done by means of finite element analysis.
The construction and assembly of the Matrix was carried out in the workshop where
it was manufactured using the economic, material and human resources of the same.
The Assembly of the Matrix was carried out in the company to ensure its correct
operation by means of injection tests.
Description
El presente proyecto se desarrolló en la ciudad de Ambato en la empresa
“COVIPLAST”, el interés de la empresa por la construcción de esta matriz radica en
la necesidad de producir un nuevo producto.
Para el diseño de la matriz se debe considerar diferentes parámetros tales como:
material a inyectar, la máquina inyectora a utilizar, las características del producto a
elaborar, los materiales a usar en la construcción de la matriz. El diseño inicia con el
cálculo de número de cavidades, luego con la conFiguración de la matriz, cálculo de
la presión de inyección y fuerza de cierre, después se seleccionó el porta molde. El
dimensionamiento y comprobación de resistencia de las placas se lo realizo por
mediante análisis por elementos finitos.
La construcción y ensamble de la matriz se lo realizó en el taller donde se fabricó
utilizando los recursos económicos, materiales y humanos del mismo. El montaje de
la matriz se lo realizó en la empresa para garantizar su correcto funcionamiento
mediante pruebas de inyección.
Keywords
GARRAFONES DE AGUA, MÁQUINA INYECTORA, SHE 120, MOLDES DE INYECCIÓN, BEBEDERO, SISTEMA DE ALIMENTACIÓN, SISTEMA DE CANALES, SISTEMA DE ENTRADA