Determinación de la producción en diferentes densidades de plantación de brócoli (Brassica oleracea var. Avenger) con aplicación de riego por goteo
No Thumbnail Available
Date
2023-03
Authors
Journal Title
Journal ISSN
Volume Title
Publisher
Abstract
The present study on the production of broccoli (Brassica oleracea var. Avenger)
based on different planting densities through the application of drip irrigation, was
carried out in the Izamba canton belonging to the province of Tungurahua, with the
purpose of determining the best production yield of the densities used, which were
0.30, 0.40 and 0.50 m between plant and row. An experimental design with completely
randomized blocks with three treatments and their corresponding three replications
was used. The data obtained were analyzed using Tukey's test at 5%, where the
following results were obtained for the following variables: plant height, diameter of
the boll (30, 60 days and harvest), weight of the boll and yield.
The data of the variables recorded were the fundamental key to perform a statistical
analysis, where it was possible to conclude that the treatment that resulted with a
considerable height during the harvest process is A2 with a mean of 35.03 cm, it is
worth mentioning that the diameter of the pellet was not formed at 30 days so, at 60
days and in the harvest process the best was A3 with means of 2.89 and 22.76 cm
respectively. However, in the weight of the pellet, the A3 treatment has a mean of
1399 g and the A2 with 4058.83g. Finally, regarding the production yield the best
treatment was A2 with 4058.83 g/m2, where the water consumption per square meter
was 169.38 L/m2, while the 169.38 L/m2, while the A3 treatment had a production of
3469.53 g/m2 and a water consumption 107.6 L/m2.
Description
El presente estudio realizado sobre la producción de brócoli (Brassica oleracea var.
Avenger) basado en diferentes densidades de plantación mediante la aplicación de
riego por goteo, se realizó en el cantón Izamba perteneciente a la provincia de
Tungurahua, con el propósito de determinar el mejor rendimiento de producción de
las densidades usadas que fueron de 0.30, 0.40 y 0.50 m entre planta e hilera. Se realizó
un diseño experimental con bloques completamente al azar con tres tratamientos y sus
tres repeticiones correspondientes. Los datos obtenidos fueron analizados mediante la
prueba de Tukey al 5%, donde se obtuvo los siguientes resultados de las variables:
Altura de planta, Diámetro de pella (30, 60 días y cosecha), Peso de la pella y
Rendimiento.
Los datos de las variables registradas fueron clave fundamental para realizar un
análisis estadístico, donde se pudo concluir que el tratamiento que resultó con una
altura considerable durante el proceso de cosecha es en el A2 con una media de 35.03
cm, cabe mencionar que el diámetro de la pella no se formó a los 30 días por lo que, a
los 60 días y en el proceso de cosecha el mejor resulto ser el A3 con medias de 2.89 y
22.76 cm respectivamente. Sin embargo, en el peso de la pella el tratamiento A3 posee
una media de 1399 g y el A2 con 4058.83g. Finalmente, en lo que respecta el
rendimiento de producción el mejor tratamiento fue el A2 con 4058.83 g/m2, donde el
consumo de agua por metro cuadrado fue de 169.38 L/m2, mientras que el 169.38
L/m2, mientras que el tratamiento A3 tuvo una producción de 3469.53 g/m2 y un
consumo de agua 107.6 L/m2
Keywords
AGRONOMIA, BRÓCOLI (Brassica oleracea var. Avenger), BRÓCOLI, CULTIVO, RIEGO POR GOTEO, RIEGO, PLANTACIÓN DE BRÓCOLI, PLANTACIÓN, DENSIDADES DE PLANTACIÓN, PRODUCCIÓN