Diseño y fabricación de una matriz de corte para producir ángulo ranurado en la empresa Mega Stand
Date
2024-02
Authors
Journal Title
Journal ISSN
Volume Title
Publisher
Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Mecánica
Abstract
The design and construction of a cutting matrix for a slotted angle was carried out to
solve the problem that the Mega Stand company has when producing metal shelves.
The company acquires this type of angles by purchasing at a high price, therefore
which cannot face the competition of this increasingly increasing market, the company
has the machinery, but not a matrix for its production.
The project was based on research and technical visits to companies that have this type
of matrix. After having obtained the necessary information, we proceeded to design
each of the components using the parameters established by various authors and
adapting them to the dimensions required by the company, subsequently the different
types of steel were acquired: ASTM A36, DF2 and AISI 1018 to carry out the
necessary machining processes such as: milling, turning, drilling, brushing, boring,
etc. For the components that are subjected to friction, quenching and tempering heat
treatments were carried out.
Finally, tests were carried out on different metal angles of different dimensions with
thicknesses from 1 to 2 mm, the latter being the one for which the cutting matrix was
designed, determining its operation, and also verifying that it is possible to make the
perforations at angles with thicknesses smaller than the designed one, which implies
an additional economic benefit for the company.
Description
El diseño y construcción de una matriz de corte para ángulo ranurado se llevó a cabo
para solventar la problemática que tiene la empresa Mega Stand al momento de
producir estanterías metálicas, la empresa adquiere este tipo de ángulos mediante la
compra a un precio elevado, por lo cual no puede hacer frente a la competencia de este
mercado que cada vez va en aumento, la empresa cuenta con la maquinaria, pero no
con una matriz para su producción.
El proyecto partió de investigaciones y visitas técnicas a empresas que cuentan con
este tipo de matriz, tras haber obtenido la información necesaria se procedió al diseño
de cada uno de los componentes utilizando los parámetros establecidos por diversos
autores y adecuándolos a las dimensiones que requiere la empresa, posteriormente se
adquirió los diferentes tipos de aceros: ASTM A36, DF2 y AISI 1018 para llevar a
cabo los procesos de mecanizado necesarios como: fresado, torneado, taladrado,
cepillado, mandrinado, etc. Para los componentes que se someten a fricción se
realizaron tratamientos térmicos de templado y revenido.
Finalmente se realizaron pruebas en distintos ángulos metálicos de diferentes
dimensiones con espesores desde 1 a 2 mm siendo este último para el cual fue diseñada
la matriz de corte, determinando su funcionamiento y además comprobando que es
posible realizar las perforaciones en ángulos con espesores menores al diseñado, lo
que implica en un beneficio económico adicional para la empresa.
Keywords
RANURADO, MATRIZ DE CORTE, ÁNGULO METÁLICO, MECANIZADO, PUNZONADO