Implementación de los requisitos técnicos establecidos por la norma técnica ecuatoriana NTE INEN-ISO-IEC 17025- 2018 para ensayos de inflamabilidad en materiales textiles de acuerdo con la norma ASTM d6413 para los Laboratorios de la Carrera de Mecánica
No Thumbnail Available
Date
2023-09
Authors
Journal Title
Journal ISSN
Volume Title
Publisher
Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Mecánica
Abstract
This technical project presents the need for the implementation of the technical
requirements established in the Ecuadorian Technical Standard NTE INEN-ISO/IEC
17025-2018 because the Mechanical Research Laboratory for Vertical Flammability
Tests on Textile Materials requires the documentation established in this standard to
establish itself as a more reliable laboratory.
For the preparation of documents, records and instructions, a thorough study of the
NTE INEN-ISO/IEC 17025-2018 Standard was carried out, complying with the
requirements established therein. In addition, vertical flammability tests were
developed for 5 textile materials (Nomex, Antifluids, Denim, Die-cut Polyester and
Cotton) in accordance with the parameters established in the ASTM D6413 Standard,
where vertical flame resistance was measured by evaluating post-flame and postincandescence times. One of the main objectives of the project is the validation of the
measurement method, which was carried out by means of the data obtained from the
vertical flammability tests and the use of specialized software, obtaining a result of
less than 30 percent, considered acceptable according to the criteria established by the
AIAG.
At the end of the project, both the documentation and the results of the method
validation will be delivered to the Mechanical Research Laboratory LIM - UTA, where
they will be used for the benefit of the Technical University of Ambato.
Description
En este proyecto técnico se presenta la necesidad de la implementación de los
requisitos técnicos establecidos en la Norma Técnica Ecuatoriana NTE INENISO/IEC 17025-2018 debido a que el Laboratorio de Investigación Mecánica para
Ensayos de Inflamabilidad Vertical en Materiales Textiles requiere de la
documentación establecida en esta norma para establecerse como un laboratorio más
confiable.
Para la elaboración de los documentos, registros e instructivos, se realizó un estudio
minucioso de la Norma NTE INEN-ISO/IEC 17025-2018 cumpliendo con los
requisitos establecidos en esta. Además, se desarrolló los ensayos de inflamabilidad
vertical de 5 materiales textiles (Nomex, Antifluidos, Denim, Poliéster Troquelado y
Algodón) de acuerdo con los parámetros establecidos en la Norma ASTM D6413,
donde se midió la resistencia a la llama vertical mediante la evaluación de los tiempos
de post inflamación y post incandescencia. Uno de los objetivos principales del
proyecto es la validación del método de medición, la cual se realizó mediante los datos
obtenidos de los ensayos de inflamabilidad vertical y el uso de un software
especializado, obteniendo un resultado inferior al 30 por ciento, considerado aceptable
según los criterios establecidos por la AIAG.
Al finalizar el proyecto tanto la documentación como los resultados de validación del
método, serán entregados al Laboratorio de Investigación Mecánica LIM – UTA,
donde se utilizarán en beneficio de la Universidad Técnica de Ambato.
Keywords
CÁMARA DE INFLAMABILIDAD, ASTM D6413, INEN 17025, VALIDACIÓN DEL MÉTODO, MATERIALES TEXTILES, ENSAYOS DE INFLAMABILIDAD