Condiciones térmicas adversas por calor en la empresa Megallantas S.A.S.
Files
Date
2025-07
Authors
Journal Title
Journal ISSN
Volume Title
Publisher
Abstract
The tire retreading process involves workers being constantly exposed to heat generated by the industrial equipment used in the process. Given this issue, the study aimed to assess the thermal conditions caused by heat among workers in the production department of the company MEGALLANTAS S.A.S., in order to determine whether these conditions exceeded the permitted risk levels.
The research was conducted using a quantitative approach, based on which numerical data derived from direct measurements and technical calculations were collected and analyzed. Heat stress was assessed in accordance with the methodology established in the UNE-EN ISO 7243 standard, using a heat stress meter (SPER SCIENTIFIC) and an anemometer (AR856) to collect environmental variables. Likewise, the metabolic consumption of the workers was estimated by applying NTP 1189. Finally, thermal comfort was evaluated under the parameters of the UNE-EN ISO 7730 standard, calculating the PMV and PPD indices, which made it possible to determine whether the workstations were in conditions of thermal stress or discomfort.
The results showed the presence of thermal stress in the tire assembly, enveloping and vulcanizing stations, as well as thermal discomfort in the initial inspection, scraping, reaming, repairs, filling and belt cutting stations, which are heat generating sources. The WBGT index values in the affected stations ranged between 20.23 and 23.60 °C, exceeding the established permissible limits. In addition, the analysis of the PMV and PPD indexes showed that more than 50% of a total of 7 workers presented significant levels of thermal dissatisfaction, with PPD values between 66.08% and 99.92%, reflecting thermal levels between “slightly hot” and “very hot”. It was proposed to reduce the main source of thermal stress through controls at the source, the environment and the person, prioritizing the most effective actions and reinforcing them with complementary measures.
Description
El proceso de reencauche de neumáticos implica la exposición constante de los trabajadores al calor, generados por equipos industriales con los que se realiza el proceso. Ante esta problemática, el estudio tuvo como objetivo evaluar las condiciones térmicas por calor en los trabajadores del departamento de producción de la empresa MEGALLANTAS S.A.S., con el fin de determinar si dichas condiciones superaban los niveles de riesgo permitidos.
La investigación se desarrolló bajo un enfoque cuantitativo, a partir del cual se recopilaron y analizaron datos numéricos derivados de mediciones directas y cálculos técnicos. La evaluación de estrés térmico por calor se realizó, conforme a la metodología establecida en la norma UNE-EN ISO 7243, utilizando un medidor de estrés térmico (SPER SCIENTIFIC) y un anemómetro (AR856) para la recolección de variables ambientales. Asimismo, el consumo metabólico de los trabajadores se estimó mediante la aplicación de la NTP 1189. Finalmente, se evaluó la confortabilidad térmica bajo los parámetros de la norma UNE-EN ISO 7730, calculando los índices PMV y PPD, lo que permitió determinar si los puestos de trabajo se encontraban en condiciones de estrés o disconfort térmico.
Los resultados evidenciaron la presencia de estrés térmico en los puestos de armado de llanta, envelope y vulcanizado, así como disconfort térmico en los puestos de inspección inicial, raspado, escariado, reparaciones, relleno y corte de banda, fuentes generadoras de calor. Los valores del índice WBGT en los puestos afectados oscilaron entre 20,23 y 23,60 °C, superando los límites permisibles establecidos. Además, el análisis de los índices PMV y PPD mostró que más del 50 % de un total de 7 trabajadores, presentó niveles significativos de insatisfacción térmica, con valores de PPD entre 66,08 % y 99,92 %, lo que refleja niveles térmicos entre “ligeramente caluroso” y “muy caluroso”. Se propuso reducir la fuente principal de estrés térmico mediante controles en la fuente, el medio y la persona, priorizando las acciones más eficaces y reforzándolas con medidas complementarias.
Keywords
ESTRÉS TÉRMICO POR CALOR, DISCONFORT TÉRMICO, ÍNDICE WBGT, ÍNDICE PMV Y PPD, SENSACIÓN TÉRMICA