Análisis de la flamabilidad del piso vinílico (SPC) según la norma NTE INEN-ISO 11925-2, con el fin de determinar su riesgo de combustión
No Thumbnail Available
Date
2024-08
Journal Title
Journal ISSN
Volume Title
Publisher
Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Mecánica
Abstract
Construction materials are constantly innovating, with an integration of plastics into
the material. The SPC vinyl floor is having a trend, since it offers other characteristics
compared to the normal floating floor, based on a new wave of new construction
materials, the market has not analyzed the behavior against an ignition source.
From this, the investigation of the reaction to fire of the construction material was
carried out according to the NTE INEN-ISO 11925-2 standard, in 4 tests with
application of a direct flame to the surface, at a time of 15 and 30 seconds, as well as
with the application of a direct flame to the edge at a time of 15 and 30 seconds, with
the direction of longitudinal and transverse specimens. For each test, 3 longitudinal
specimens and 3 transverse specimens were extracted, which were conditioned as
specified in the standard, at a temperature of approximately 23 degrees Celsius with
an acceptable variation of plus or minus 2 degrees, and at a relative humidity of 50
percent with a variation acceptable of plus minus 5 percent, in the reaction to fire test
chamber of construction materials the requirement was met when igniting the flame
which has to meet a flame height of 20 millimeters, subsequently the tests were carried
out, with their respective specifications.
The results show that the previous material behaves differently based on time;
However, its behavior concludes that it is considered self-extinguishing.
Description
Los materiales de construcción están en constante innovación, con una integración de
plásticos en el material. El piso vinílico SPC está teniendo una tendencia, ya que ofrece
otras características a comparación del piso flotante normal, en base a una nueva ola
de nuevos materiales de construcción, el mercado no ha analizado el comportamiento
frente a una fuente de ignición.
A partir de esto, se realizó la investigación de la reacción al fuego del material de
construcción según la norma NTE INEN-ISO 11925-2, en 4 ensayos con aplicación de
una llama directa a la superficie, a un tiempo de 15 y 30 segundos, como también con
aplicación de una llama directa a borde a un tiempo de 15 y 30 segundos, con sentido
de probetas longitudinales y transversales. Para cada ensayo fueron extraídas 3
probetas longitudinales y 3 probetas transversales, que fueron acondicionas según
especifica la norma, a una temperatura de aproximadamente 23 grados Celsius con una
variación aceptable de más menos 2 grados, y a una humedad relativa del 50 por ciento
con una variación aceptable de más menos 5 por ciento, en la cámara de ensayos de
reacción al fuego de materiales de construcción se cumplió el requerimiento al
encender la llama el cual tiene que cumplir una altura de la llama a 20 milímetros,
posteriormente se realizó los ensayos, con sus respectivas especificaciones.
Los resultados muestran que el material anterior en base al tiempo se comporta de
distinta forma; sin embargo, el comportamiento de este concluye, que es considerado
auto extinguible.
Keywords
NTE INEN-ISO 11925-2, PISO VINÍLICO SPC, IGNICIÓN, MATERIAL AUTO EXTINGUIBLE, ENSAYO DE FLAMABILIDAD