Por favor, use este identificador para citar o enlazar este ítem: https://repositorio.uta.edu.ec/jspui/handle/123456789/34076
Título : Sistema de monitoreo de salud estructural (SHM) de puentes de hormigon mediante redes WSN
Autor : Salazar Escobar, Fabián Rodrigo
López Naranjo, Saúl Gabriel
Palabras clave : ZIGBEE
ARDUINO
MONITOREO SALUD ESTRUCTURAL
SHM
REDES WSN
Fecha de publicación : 2021
Editorial : Universidad Técnica de Ambato. Facultad de Ingeniería en Sistemas, Electrónica e Industrial. Maestría en Telecomunicaciones
Resumen : This project designs a structural health monitoring system (SHM Structural Health Monitoring), based on WSN networks to control the integrity, safety and performance of the structure of a concrete bridge through the deployment of several sensors, responsible for constantly recording the vibrations caused by vehicular flow, pedestrian or due to unpredictable events caused by nature, such as earthquakes, high winds etc.. This wireless sensor network has a dynamic architecture, consisting of several stages, first there are the sensors also known as nodes which are located at the most critical points of the structure, the same that are responsible for recording the vibrations during time intervals. Subsequently, the information obtained is transmitted by radiofrequency signals to the central node or Gateway, which is in charge of collecting the information received from the nodes and sharing it with a computer located at the base station. As a result of the monitoring, a strong correlation was found between the length of the bridge and its respective vibration periods, regardless of the thickness of the concrete structure of the bridge. With this research, a baseline or reference line on the behavior of this type of bridges was established, so that in the future there will be a continuous follow-up and updating of the recorded information, with the intention of predicting failures and damages caused either by the vehicular or human flow or due to the environmental forces to which the bridge is exposed.
Descripción : En el presente proyecto se diseña un sistema de monitoreo de salud estructural (SHM Structural Health Monitoring), basado en redes WSN para controlar la integridad, seguridad y rendimiento de la estructura de un puente de hormigón mediante el despliegue de varios sensores, encargados de registrar constantemente las vibraciones provocadas por el flujo vehicular, peatonal o debido a eventos impredecibles provocados por naturaleza, como son sismos, vientos fuertes etc. Esta red de sensores inalámbrica posee una arquitectura dinámica, conformada por varias etapas, primero están los sensores también conocidos como nodos los cuales están ubicados en los puntos más críticos de la estructura, los mismos que se encargan de registrar las vibraciones durante intervalos de tiempo. Posteriormente la información obtenida es transmitida por señales de radiofrecuencia hacia el nodo central o Gateway, encargado de recolectar la información recibida desde los nodos y compartirla hacia un ordenador ubicado en la estación base. Como resultado del monitoreo se encontró una fuerte correlación entre la longitud del puente y sus respectivos períodos de vibración; así, independientemente del espesor de la estructura de hormigón del puente. Con esta investigación se estableció una línea base o de referencia sobre el comportamiento de este tipo de puentes, de manera que en el futuro se dé un seguimiento y actualización continua de la información registrada, con la intención de predecir fallas y daños causados ya sea por el flujo vehicular, humano o debido a las fuerzas ambientales a las que está expuesto el puente.
URI : https://repositorio.uta.edu.ec/jspui/handle/123456789/34076
Aparece en las colecciones: Maestría en Telecomunicaciones

Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
t1925mtel.pdfTexto completo3,87 MBAdobe PDFVisualizar/Abrir


Los ítems de DSpace están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.