Ingeniería Civil y Mecánica
URI permanente para esta comunidadhttp://repositorio.uta.edu.ec/handle/123456789/898
Examinar
2 resultados
Resultados de la búsqueda
Item type:Ítem, Repotenciación de la máquina de inyección de plástico vertical (mayal) para el laboratorio de la FICM-UTA(Ingeniería Civil y Mecánica. Carrera Ingeniería Mecánica, 2025) ;Ronquillo Paredes Luis ÁngelParedes Salinas Juan GilbertoThe vertical plastic injection machine, "Mayal," is located in the laboratory of the Faculty of Civil and Mechanical Engineering at the Technical University of Ambato. It is used for educational purposes to manufacture plastic test specimens used in mechanical testing for the analysis of materials and manufacturing processes. The machine presented operational deficiencies, long cycle times, and a high error rate in the molded test specimens, reaching up to 60% of defects in the produced specimens. It is proposed to upgrade the systems to optimize their operation. The methodology employed consisted of equipment diagnosis, the design of solutions based on a selection of alternatives and simulations, and the implementation of the selected new systems, replacing obsolete mechanisms and integrating a semi-automatic control system. An injection pressure of 10 bar and a clamping force of 3117 N were calculated. The redesign considered existing molds for standardized test specimens under the ASTM D638 tensile test specimen, ASTM D790 flexural test specimen, and ASTM D5625 impact test specimen standards. As a result, the work cycle time was reduced by 30%, doubling productivity and reducing the percentage of defective parts. The intervention of the machine allowed its functionality to be recovered and the control system to be updated, for the calibration of the work cycle parameters.Item type:Ítem, Diseño y construcción de un dispensador de tela para una máquina troqueladora de puente en la empresa Distrishoes S.A.(Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica. Carrera de Ingeniería Mecánica, 2017) ;Martínez Andino, Christian AndrésLópez Villacís, Gonzalo EduardoThe present project is carried out in order to optimize the punching process, the same that is done by two operators in a machine. The punching consists of cutting a block of textile material (laminated canvas) formed by twelve layers or sheets.The fabric dispenser allows facilitating the transport of the material, to reduce the personnel to an operator and most importantly to avoid the loss of material due to misalignment of their layers. The present project consists of two main parts such as the rolls where twelve rolls of laminated textile canvas are housed and on the other hand fabric feeder those fulfills the function of unrolling the material and transport it to the cutting surface of the ATOM G 888 die cutter. The design is performed both analytically using the ASD method for Metal structures as by using two software, the one of Structural analysis and the other part design and modeling.
