Ingeniería Civil y Mecánica

URI permanente para esta comunidadhttp://repositorio.uta.edu.ec/handle/123456789/898

Examinar

Resultados de la búsqueda

Mostrando 1 - 7 de 7
  • Item type:Ítem,
    Caracterización del comportamiento frente al fuego de tres tipos de suelos de las parroquias: Cotundo, San Pablo de Ushpayucu, y Archidona cabecera cantonal, provincia de Napo utilizados en obras civiles
    (Universidad Técnica de Ambato-Facultad de Ingeniería Civil y Mecánica-Carrera de Ingeniería Civil, 2026-07-01)
    Rosero Toalombo Christofer Adrian
    ;
    Pérez Maldonado Ruth Lorena
    ;
    Universidad Técnica de Ambato-Facultad de Ingeniería Civil y Mecánica-Carrera de Ingeniería Civil
    This study addressed the thermal susceptibility of Amazonian soils in the parishes of Cotundo, San Pablo de Ushpayacu, and Archidona La Cabecera Cantonal in the Napo province, driven by the increasing risk of wildfires. The main objective was to quantify the physicomechanical, hydraulic, and bearing capacity changes of the material when subjected to a controlled temperature of 750 °C. All geotechnical procedures were carried out based on international standards such as ASTM and AASHTO, contrasting the properties of the materials in their natural state against their post-thermal treatment state. The results indicated an irreversible geomechanical degradation. The CBR residual bearing capacity support a critical collapse, with San Pablo de Ushpayacu being the most affected parish, registering a variation of 34.00%. The loss of support was due to clay deactivation and the decrease in the plasticity index, where Cotundo exhibited the lowest resistance, with an absolute decrease of 29.53% in its plasticity index. Hydraulic conductivity showed an increase across the three samples, with Cotundo marking an 82.46% increase in permeability due to the elimination of the soil's organic fraction. The time-monitored tests determined that the soil is non-combustible. It was concluded that fire significantly affects soil stability, rendering them mechanically unstable but highly permeable.
  • Item type:Ítem,
    Análisis experimental de la capacidad filtrante de drenaje de los agregados pétreos provenientes de la cantera Mollepamba, ubicada en la provincia de Cotopaxi cantón Salcedo
    (Ingeniería Civil y Mecánica. Carrera Ingeniería Civil, 2025)
    Quiroga Moyano Christian Israel
    ;
    Pérez Maldonado Ruth Lorena
    The present research was developed with the fundamental purpose of evaluating and determining the drainage filtering capacity of stone aggregates extracted from the "Mollepamba" quarry, strategically located in Cotopaxi province, Salcedo canton, through the implementation of specialized permeability tests that would allow the establishment of reliable technical parameters. In this context, the intrinsic variability of the physical and mechanical properties of stone aggregates extracted from natural quarries represents a considerable technical challenge for design engineers and constructors, especially when considering the progressive increase in the frequency and intensity of extreme climatological events that have conclusively demonstrated the critical importance of developing and implementing highly efficient and resilient drainage systems for urban and rural infrastructures. To ensure the representativeness of the study, five representative samples were collected through manual excavation at strategic points distributed within the quarry exploitation area. The obtained samples were subjected to laboratory tests that included the determination of natural moisture content, evaluation of Atterberg limits, and detailed granulometric analysis, all executed following the corresponding ASTM standards to guarantee the reliability of the results. The experimental results revealed that moisture content fluctuated between 0.54% and 4.75%, with an average of 2.67%, indicating favorable conditions for drainage applications. The granulometric analysis showed gravel contents between 32% and 41%, sand between 50.7% and 65.78%, while fine materials did not exceed 8.21%, configuring an adequate gradation for filtration and drainage. All samples were classified as A-1-a according to AASHTO and mainly as SW-SC according to SUCS, indicating well-graded sands with controlled clay content that favors drainage properties. The plasticity indices resulted negative, varying between -13.10% and -2.03%, classifying the material as non-plastic. These results confirm that the aggregates from Mollepamba quarry possess favorable geotechnical characteristics for drainage system applications, maintaining volumetric stability against environmental humidity fluctuations
  • Item type:Ítem,
    Análisis del coeficiente de permeabilidad de zeolita natural tipo clinoptilolita en la reducción de colorante reactivo negro bodactive wnn de aguas residuales de lavadoras de jeans
    (Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil, 2024-02)
    Espinoza Apráez, José Rafael
    ;
    Paredes Beltrán, Bolívar Eduardo
    Permeability is a characteristic of materials that allow a fluid to pass through a filter medium, such as the natural zeolite type clinoptilolite. The present study aims to verify if the permeability coefficient (k) influences the reduction of the reactive black dye WNN, which is a dye widely used in the jean industry, which generates large wastewater discharges of said dye without a adequate treatment. To analyze this relationship, permeability tests were carried out with different concentrations of dye with previously studied dosages, selecting 1 g, 5.8 g and 10.6 g per 20 liters of water each. In addition, a scale filter prototype was made that replicates the volumes of the permeameter and allows us to take samples for liquid analysis in UV-Vis spectrophotometer and saturation and mass method, at intervals of 6 hours, until completing one day. A medium permeability was obtained, which had no impact on the reduction of the dye, but it was found that, the higher the concentration of dye in the water, the lower the permeability coefficient, that is, the liquid takes longer to pass through the volume of the material studied. However, the time variation is less than one second, which is why it does not have a major impact. Through the results of the UV-Vis spectrophotometer, it was seen that the material takes approximately 18 hours to saturate and that the reduction of the dye is practically nil.
  • Item type:Ítem,
    Diseño y construcción de un accesorio externo automotriz bajo el proceso de infusión al vacío con material compuesto de matriz polimérica
    (Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Mecánica, 2024-02)
    Tenorio Cabezas, Vanessa Estefanía
    ;
    Paredes Salinas, Juan Gilberto
    Actually the application of composite materials for the forming and creation of components or accessories is one of the greatest needs in the industrial field, aiming to reduce the weight and the replacement of metals, preserving or improving the properties of the materials. The progress of the forming processes are mostly manual, causing irreversible failures such as porosity, cracks, air bubbles and more defects, forming less resistant laminates. The Technical Project focused on obtaining the main parameters involved in the vacuum infusion process applied to a laminate with a complex shape, that is, curved, inclined, straight and deep areas. In addition, Tensile-Flexural tests were carried out to check the mechanical properties of the laminate obtained and cured at a temperature of 80 grades Celsius for two hours. The results obtained through the application of the process were compared with other commercial projects that were formed under the same parameters. The technical work showed that for a vacuum infusion process, permeability is one of the parameters that influenced at the time of lamination, using and applying Darcy's Law, for that reason it was important to select the complements (vacuum infusion kit) and it was verified that the orientations of the natural or synthetic fibers should be at 45 grades for greater resistance, but if a laminate with lower residence is desired, the recommended orientation is from 0 to 90 grades.
  • Item type:Ítem,
    Determinación de las propiedades mecánicas, compresión y flexión, para distintas relaciones de a/c en la elaboración de hormigón permeable
    (Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil, 2023-08)
    Shambi Minda, Alejandra Micaela
    ;
    Navarro Peñaherrera, Carlos Patricio
    Pervious concrete is usually used in pavements to allow water infiltration in order to reduce surface runoff and avoid interruption of the water cycle. However, this material has a high void content, so its mechanical properties tend to be lower than those of traditional concrete. In the present investigation, the resistance to compression, flexion and permeability of pervious concrete was studied, to determine the influence of the w/c ratio. For which the properties of the aggregates extracted from the “Puertas del Sol” mine were determined, later the dosage was calculated for the w/c ratios of 0.35 and 0.30 using the ACI 522R-10 method, in addition to the use of 50mm polypropylene fibers and plasticizer additive. 12 cylinders (100x200) were made for each one, permeability tests were carried out according to ACI 522R-10, in addition, the compression test was carried out at 7 and 28 days according to the ASTM C39 standard. Subsequently, beams (100x100x350) were made, with 3 test pieces for each dosage for the bending test, following the ASTM C78 standard. Once the data was tabulated, comparative graphs of the properties studied were made. This allowed us to observe that the highest compressive strength was 9.70 MPa with a permeability of 0.37 cm/s, corresponding to a w/c of 0.35. Regarding bending, the tests determined that the modulus of rupture of w/c 0.35 was 1.69 MPa, double that obtained with w/c 0.30.
  • Item type:Ítem,
    Efectos de la zeolita como material suplementario del cemento portland en la resistencia a tracción indirecta del concreto estructural
    (Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil, 2022-01)
    Panimbosa Panimbosa, Ricardo Guillermo
    ;
    Medina Robalino, Wilson Santiago
    The emission of carbon dioxide from the cement industry generates environmental issues, hence the strategy of using zeolites as supplementary cementitious materials and contributing to the fight against climate change. In this research, the physical characterization of a zeolite mineral and a type of cement, commercially available, was carried out, followed was determinate of the setting time in pastes to reach the topic that is the indirect tensile strength of concretes for structural purposes, designed for a compressive strength of 24MPa and the permeability was evaluated through the penetration of pressurized water, a factor that influences its durability. The percentages of cement substitution by zeolite were 0, 10, 15 and 20 percent in pastes such as concretes. The density, specific surface area and average particle size determined for zeolite are 2.41 grams per cubic centimeter, 563 square meters per kilogram and 5 micrometers, respectively. The cement-zeolite pastes evidenced a higher water demand to enter normal consistency, hence, a longer setting time. To ensure the workability of the zeolite concrete, a plasticizing additive was used. The indirect tensile strength at the age of 28 days in the zeolite concrete specimens was almost equal to or slightly lower than the control concrete. Water penetration was higher at all substitution percentages. The 20 percent substitution showed better effects on fresh and hardened properties.
  • Item type:Ítem,
    Análisis de la presencia de gas radiactivo radón en agregados pétreos de la provincia de Tungurahua y su incidencia en la construcción
    (Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil, 2020)
    Chicaiza Gómez, Néstor Fabricio
    ;
    Suquillo Ronquillo, Betzabeth Jessenia
    This work analyzed the meteorological parameters that influence at presence of gas radon222 in the mining of building materials (gravel and sand) of Tungurahua province, the parameters analyzed were geological structure of the soil, temperature and water precipitation around of minings, furthermore is important consider the population that inhabit or frequent these places. The work determined the physical and mechanical properties of aggregates to study the influence in the emanation, transport and exhalation of radon222 and the total exhalation calculated for a concrete building with f'c 180 and 210 kilograms per square centimeter. The emanation of gas radon is limited by high percentages of moisture content in situ, and the high capacity of absorption on the aggregates, with concentrations of (18.33 plus or minus 8.89) y (21.96 plus or minus 7.84) becquerel per cubic meter in sand and gravel. The voids generated in the concrete due to the different sizes of sand and gravel determinate by granulometry test; these voids influence the gas radon222 transporting indoor of building. The effective annual dose due to radon222 inhalation, produced in a basement with a volume of 333 cubic meters of a representative housing in the area and with an occupation factor of 4750 hours per year is 0.260 milis sievert per year with a margin of error of plus or minus 10 percent.