Ingeniería Civil y Mecánica
URI permanente para esta comunidadhttp://repositorio.uta.edu.ec/handle/123456789/898
Examinar
3 resultados
Resultados de la búsqueda
Item type:Ítem, Diseño de conexiones entre perfiles conformados en frío de sección UV en acero ASTM A36, utilizados para la construcción de torres de telecomunicaciones(Universidad Técnica de Ambato-Facultad de Ingeniería Civil y Mecánica-Carrera de Ingeniería Mecánica, 2026-07-05) ;Candilejo Simbaña Adrián Alexander ;Martinez Chuncha Alex Daniel ;Peña Jordán Francisco AgustínUniversidad Técnica de Ambato-Facultad de Ingeniería Civil y Mecánica-Carrera de Ingeniería MecánicaThis research focused on the design and evaluation of a bolted connection between cold-formed UV-section profiles made of ASTM A36 steel, intended for telecommunication tower structures. The study arose from the need to improve the behavior of lightweight steel connections subjected to axial loads, since local failure mechanisms can affect the stability of the structural system. For this purpose, a connection configuration was proposed using 6 mm thick UV profiles, 8 mm connection plates, and galvanized A325 bolts. The methodology combined experimental tensile and compression tests on assembled specimens to determine the mechanical response, maximum load and displacement, and associated failure modes. In parallel, finite element models were developed to represent the behavior of the connection under axial loading. The comparison between experimental and numerical results was carried out using the average maximum load as the main evaluation parameter. In tension, an average experimental load of 276,20 kN was obtained, while the finite element model reached 254,22 kN, with a percentage error of 7,96 %. The failure mode was associated with local damage around the holes. In compression, an average experimental maximum load of 258,36 kN was obtained, while the finite element model reached 238,64 kN, with a percentage error of 7,63 %. The failure mode was associated with local buckling of the profile webs and the connection plate. The models reproduced the failure mode and load-bearing capacity of the proposed connection.Item type:Ítem, Análisis Comparativo del Diseño de Placas Base, Mediante el Método del AISC, Método de Líneas de Rotura y MEF, Aplicado a un Edificio de Baja Altura(Ingeniería Civil y Mecánica. Carrera Ingeniería Civil. Maestría con mención en Estructuras Metálicas, 2025-12-05) ;Guijarro Paredes Fernando AgustínRamírez Cabrera Wladimir JoséThis research focuses on the structural analysis of base plates using three different methodologies: two manual approaches, one based on the AISC provisions and another on the yield line theory, and a third approach using finite element modeling (FEM). The study was conducted on two types of base plates, an internal and an external configuration, both part of a dual structural system composed of reinforced concrete shear walls and special moment-resisting steel frames, designed for seismic conditions specific to the Ecuadorian context. The investigation involved a comparative assessment of stresses in the plates, anchor bolt tensions, component deformations, and final element dimensions. The results show that the yield line method allows for a significant reduction in plate thickness and material usage compared to the more conservative AISC-based design. This trend was validated through finite element simulations, which confirmed the structural viability of the optimized designs. Overall, the findings highlight the potential of combining analytical and numerical approaches to achieve more efficient and structurally sound solutions adapted to local seismic demands.Item type:Ítem, Diseño y construcción de un troquel de corte y perforado de platina metálica de espesor 1/8 de pulg. para la empresa ingeniería del acero y matricería en la ciudad de Ambato provincia de Tungurahua(Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica. Carrera de Ingeniería Mecánica, 2018) ;Pérez Pallo, Edgar DanielPérez Salinas, Cristian FabiánThe main objective of this project is to develop a methodology for the design and construction of dies that perform cutting and punching operations. It also allows the reader to understand how the optimization criterion works, creating a model using the Finite Elements method that facilitates the cutting process and perforated for a metal plate that has 1/8 inch of thick. For which a series of mechanical Traction and Bending tests were carried out, using the ASTM E8-16a and ASTM E290-14 standards respectively, to determine the properties of AISI SAE D3 steel commercially known as BOHLER K 100, steel selected for construction of the die To carry out the optimization of the punching process, series of simulations were carried out using a Finite Element software to determine the geometry of the punches that produces the least possible cutting effort when these operations are carried out. The results obtained through the simulations carried out by alternating the geometry of the punches allowed to determine values of the shear stress produced, from which the lowest value obtained was selected, which represents a reduction of 62% in relation to the effort obtained when the operation was simulated whit any specific geometry of the drilling punch.
