Ingeniería Civil y Mecánica

URI permanente para esta comunidadhttp://repositorio.uta.edu.ec/handle/123456789/898

Examinar

Resultados de la búsqueda

Mostrando 1 - 2 de 2
  • Item type:Ítem,
    Propuesta de un proceso de conservación para la estructura de la capa de rodadura de la vía Mocha-Pinguilí-Yanahurco, en el tramo de la abscisa k0+000 a k4+000 de la provincia de Tungurahua
    (Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil, 2023-01)
    Lara Pérez, Lenin Alejandro
    ;
    Aldas Sánchez, Milton Rodrigo
    The section of the road under study at this moment is not in optimal condition, which makes mobility difficult because of the fact that it is the connection point between cantonal capitals such Mocha - Cevallos being a highly productive (populated) area, which causes there to be inefficient marketing of this products. For the development of this technical work, a georeferenced survey was initially carried out with the help of an RTK, this determines the length, width, ditches, water passages, and other sections of the road. A manual count of the types of vehicles that circulate on the road the Annual Average Daily Traffic (TPDA) was determined, this was done during a week with 12 daily hours taken into account from 6:00 a.m. to 6:00 p.m. Subsequently, soil test pits were extracted, two per kilometer, and altered soil samples were obtained to be tested in the laboratory and the granulometry, compaction, Atterberg limits and California Support Index (CBR) test were determined. The Pavement Condition Index (PCI) study was carried out, through which the degree of severity of the damages located in the surface layer was identified. Finally, the test was carried out with the Benkelman beam, which allowed determination of the deflections of the pavement. Once the results of the tests were obtained, graphs, tables, abacuses and plans were made, which allowed them to be clearly interpreted.
  • Item type:Ítem,
    Plan de conservación para la estructura del pavimento de la vía Aláquez – Mulaló en el tramo de la abscisa 0+000 hasta 4+970 de la provincia de Cotopaxi
    (Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil, 2020-10)
    Mise Ruiz, John Anderson
    ;
    Acosta Lozada, Rodrigo Iván
    The objective of this technical work is to carry out a conservation plan for the pavement structure of the Aláquez-Mulaló road in the section of abscissa 0 + 000 to 4 + 970 in the province of Cotopaxi, since the roads in the province of Cotopaxi do not have a road maintenance plan for which they were designed. Initially, a topographic survey and road inventory were carried out, where the characteristics of the road, length, width, as well as the presence of sidewalks, ditches, sewer wells and adjacent streets were verified. A traffic study was carried out where the Average Annual Daily Traffic (TPDA) was determined to be 2002 vehicles / day, therefore, it is classified on a class II collection road, which will suffice with the two current lanes, one in each address, in addition to uniting two important parishes such as Aláquez and Joseguango Bajo. To assess the current state of the pavement structure, the Pavement Condition Index (PCI) was used, which identifies the amount and severity of surface faults found in the tread layer, it was determined that the average PCI is 74.6 percentage, classifying on a road in very good condition, that is, on the Aláquez-Mulaló road, it indicates that it needs road maintenance. Subsequently, a samples was carried out every kilometer in order to extract soil samples and carry out laboratory soil tests such as granulometry, Atterberg limits, compaction and the California Support Index (CBR) test. Finally, according to the results obtained in the PCI test, routine maintenance must be carried out in order to extend the design life of the asphalt binder. Said routine maintenance has a reference budget of 32,304.07 USD.