Ingeniería Civil y Mecánica
URI permanente para esta comunidadhttp://repositorio.uta.edu.ec/handle/123456789/898
Examinar
3 resultados
Resultados de la búsqueda
Item type:Ítem, La adición de botellas plásticas PET en la elaboración de bloques de adobe para viviendas unifamiliares y su efecto en la variación de temperatura y acondicionamiento acústico en el cantón Ambato provincia de Tungurahua(Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil, 2019) ;Robalino Sánchez, Edwin FernandoLópez Arboleda, Alex GustavoThe present investigation shows the analysis and results of the study of the variation of the temperature and acoustic conditioning of samples of adobe. The mud for the manufacture of the artisan adobes was extracted immersed areas in the province of Tungurahua, the parish of Pilahuin located southwest of Ambato, and the parish Pilisurco located northwest of the canton Ambato. As regards the manufacturing process of the blocks, it was established to perform it based on the parameters described in the Peruvian standard E.080 - Design and Construction with Reinforced Earth. Previously, the study of physical parameters was carried out, in order to maintain a good context of its composition, in addition to establishing an evaluation of soil quality to abide by the aforementioned standard. It was established to carry out the study for 4 combinations, the clay plus a percentage of plastic PET crushed depending on the volume, where it was necessary to place in order of: 0%, 5%, 10% and 15%. The analysis performed for temperature and sound tests is based on the procedures described in the standards: NCh. 851 of 1983, NCh. 849 of 1987 Thermal Insulation, and NCh. 2865 of 2004 Acoustics, where the level of acoustic insulation and variation of temperature was established, based on the construction of a hermetic chamber with metal structure, gypsum boards and wool with fiberglass, in which 16 samples of adobe were placed in Panel form for each specified combination. The results referring to the level of acoustic insulation remained optimal with the block plus 15% PET, and the highest level of thermal insulation was produced with 5% PET material. Finally, a comparison was made of the compressive strength of the adobe blocks made, and the minimum resistance accepted by the Peruvian standard E.080 - Design and Construction with Reinforced Earth. Six samples were made for each combination, where it is established that with 0% and 5% of PET material, it reaches a resistance superior to 10,2 kg/cm2, while when increasing to 10% and 15% of PET, the resistance decreases.Item type:Ítem, La adición de aserrín y poliestireno en la elaboración de bloques de adobe para viviendas unifamiliares y su efecto en la variación de temperatura y acondicionamiento acústico en el cantón Ambato, provincia de Tungurahua(Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil, 2019) ;Pino Escobar, Holguer AlejandroNúñez Aldás, Galo WilfridoThe present experimental work evaluated the use of sawdust and polystyrene in the elaboration of blocks of adobe to determine the variation of temperature and acoustic conditioning. Firstly, a soil selection and analysis process were carried out based on the E-080 standard, later, traditional adobe blocks and adobe blocks were prepared with a percentage of 5%, 10% and 15% of sawdust and polystyrene in addition to each mixture. The blocks were tested under compression in the course of 28 days from its preparation, the test showed that all the samples analyzed exceeded the minimum resistance of 1MPa established in the E-080 Standard, but the highest compressive strength obtained was 2.66 MPa in blocks with 5% sawdust and polystyrene, thus exceeding the minimum resistance by 50%. Before making the test, adobe walls were made with each percentage of additives established, which were assembled inside the chamber, consecutively they were put to the thermal analysis based on the NCh 851 - NCh 849 norms and acoustic based on the norm NCh 2865. Finally, when quantifying the results, it was found that the wall made with adobes plus 5% and 15% sawdust and polystyrene maintains the best thermal variation and acoustic conditioning in such a way that it was selected as the best block prototype for the present investigation.Item type:Ítem, La adición de bolsas plásticas en la elaboración de bloques alivianados para viviendas unifamiliares y su efecto en la variación de temperatura y acondicionamiento acústico en el cantón Ambato, provincia de Tungurahua(Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil, 2019) ;Cando Pichucho, Carlos XavierChérrez Gavilanes, Diego SebastiánThe present experimental work evaluated the use of the crushed plastic bags in the manufacture of relieved blocks, to determine the variation of temperature and acoustic conditioning. In the first place, a material dosage was elaborated in which the coarse aggregate was replaced by 15%, 25%, 50% and 75% of plastic bags crushed, which was used to make the blocks. The blocks were tested under compression, in which it was found that the block with 15% of crushed plastic bags obtained a compression resistance value of 3.78 Mpa which reveals that meets the minimum value of 3.5 Mpa of compressive strength proposed by Standard NTE INEN 3066. Then, walls were made with the blocks, which were placed inside a chamber to evaluate the temperature variation and acoustic conditioning by temperature and sound sensors, and the Xplorer GLX equipment, where it was proved that the wall with 50% of crushed of plastic bags presents the best temperature variation with an insulation of 34.91 ºC and the wall with 15% presents the best acoustic conditioning with 47.35 dBA. Finally, it was concluded that the block with 15% of crushed plastic bags presents the best performance in terms of compression resistance, temperature variation, and acoustic conditioning to be used in single-family homes in Ambato canton, Tungurahua province.
