Ingeniería Civil y Mecánica
URI permanente para esta comunidadhttp://repositorio.uta.edu.ec/handle/123456789/898
Examinar
2 resultados
Resultados de la búsqueda
Item type:Ítem, Diseño de conexiones entre perfiles conformados en frío de sección UV en acero ASTM A36, utilizados para la construcción de torres de telecomunicaciones(Universidad Técnica de Ambato-Facultad de Ingeniería Civil y Mecánica-Carrera de Ingeniería Mecánica, 2026-07-05) ;Candilejo Simbaña Adrián Alexander ;Martinez Chuncha Alex Daniel ;Peña Jordán Francisco AgustínUniversidad Técnica de Ambato-Facultad de Ingeniería Civil y Mecánica-Carrera de Ingeniería MecánicaThis research focused on the design and evaluation of a bolted connection between cold-formed UV-section profiles made of ASTM A36 steel, intended for telecommunication tower structures. The study arose from the need to improve the behavior of lightweight steel connections subjected to axial loads, since local failure mechanisms can affect the stability of the structural system. For this purpose, a connection configuration was proposed using 6 mm thick UV profiles, 8 mm connection plates, and galvanized A325 bolts. The methodology combined experimental tensile and compression tests on assembled specimens to determine the mechanical response, maximum load and displacement, and associated failure modes. In parallel, finite element models were developed to represent the behavior of the connection under axial loading. The comparison between experimental and numerical results was carried out using the average maximum load as the main evaluation parameter. In tension, an average experimental load of 276,20 kN was obtained, while the finite element model reached 254,22 kN, with a percentage error of 7,96 %. The failure mode was associated with local damage around the holes. In compression, an average experimental maximum load of 258,36 kN was obtained, while the finite element model reached 238,64 kN, with a percentage error of 7,63 %. The failure mode was associated with local buckling of the profile webs and the connection plate. The models reproduced the failure mode and load-bearing capacity of the proposed connection.Item type:Ítem, Desarrollo de un software específico para el diseño de conexiones de arriostre o viga-columna para pórticos especiales arriostrados concéntricamente, conforme a la normativa ANSI/AISC 341 -16(Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica. Maestría en Ingeniería Civil con Mención en Estructuras Metálicas, 2022-03) ;López López, Liliana Lizbeth ;Pico Núñez, María FernandaMedina Robalino, Wilson SantiagoThe present research project has as purpose the codification of a specific software for bracing connections or beam-column connections design for steel special concentrically braced frames (SSCBF). It allows us to design in a quick and safe way the simple beamcolumns (bolted) connection, welded beam-column connection, double braced beam column (welded) connection, X brace-beam (welded) connection, simple beam-column (bolted) corner connection, and simple beam-column (welded) corner connection. For the design of the different connections, they were analyzed by ANSI/AISC 341-16 Standards criteria. From it the calculation equations for a design by capacity were taken. For the development of the software, we started with the manual calculation of the different connections, with this the software programming code was developed and at the same time the graphic interface for the visualization of the results was created. For the veracity of the SCBF DESIGN CONNECTION software, the results obtained by the developed software were compared with the manual method; resulting in a margin of error of less than 1.50 percent, thus verifying that the results obtained by the software are reliable.
