Ingeniería Civil y Mecánica

URI permanente para esta comunidadhttp://repositorio.uta.edu.ec/handle/123456789/898

Examinar

Resultados de la búsqueda

Mostrando 1 - 7 de 7
  • Item type:Ítem,
    Diseño y construcción de un sistema hidrostático para pruebas de bop en pozo de la empresa EQUIPETROL S.A
    (Ingeniería Civil y Mecánica. Carrera Ingeniería Mecánica, 2025)
    Castillo Navarrete Xavier Alejandro
    ;
    Castro Miniguano Christian Byron
    Equipetrol S.A. Ecuador focuses on providing services and equipment for the oil and gas exploration and production industry. It currently has three active service lines: Slickline, which focuses on wireline operations for plugging, dewaxing, valve installation, and other tasks; Wireline, which uses electrical conductors for well logging and perforation; and Completions, which is dedicated to the installation of single and dual completions for production. Therefore, the wide variety of tools and equipment used in different areas must be thoroughly evaluated, which is why some robust devices that are already in operation are tested in the field. However, the current hydrostatic system has limitations in terms of transport due to its robust and heavy design, causing delays in logistics and operations, which has led to the proposal of a portable system design based on the company's requirements. The methodologies used are comparative analysis between the various options on the international market to apply the weighting method, which is based on the most notable factors such as the type of pumps, structure, and pressure readings, which are evaluated against criteria of utility, investment, maintenance, and operability. Subsequently, a customized design is proposed for analytical study in the selection of components and raw materials, in addition to simulation of stresses, displacement, and safety factors. As a result, a compact design was obtained with two pneumatic pumps, one piston and one double diaphragm, for pressure testing at 4500 psi according to API standards, with the possibility of connecting a pressure transducer for safe and accurate monitoring of the tested equipment.
  • Item type:Ítem,
    Implementación del sistema de bombeo de agua potable para Junta Administradora de agua potable y saneamiento La Victoria, cantón Pujilí
    (Ingeniería Civil y Mecánica. Carrera Ingeniería Mecánica, 2025)
    Moya Figueroa Edwin Mauricio
    ;
    Santana Gómez José Carlos
    The project implements a potable water pumping system for the Administrative Board of La Victoria, Cotopaxi, with the aim of ensuring supply to 3,484 residents during periods of scarcity. The system takes advantage of existing water sources through pumping and pipeline networks adapted to the area's topographic conditions. The parish experiences water shortages from June to September, affecting public health and local agricultural productivity. This proposal addresses the urgent need for continuous access to treated water, reduces sanitary risks, and strengthens community resilience in the face of climate change. The selection of equipment and materials is based on elevation analysis and hydraulic losses. A detailed topographic survey was conducted, determining an initial elevation of 2,944 meters and a final elevation of 3,125 meters above sea level. Friction losses were calculated using standard methods to size galvanized steel and PVC pipes, balancing efficiency, and cost. A multistage submersible pump was selected with a flow rate of 7 liters per second and a total dynamic head of 317.75 meters, achieving an efficiency greater than 73 percent. The benefits were analyzed by comparing the costs incurred before the implementation of the pump with the savings generated afterward. The results show significant savings, with the investment expected to be recovered in approximately six years. Recommendations were established for future system upgrades and ways to extend its operational lifespan
  • Item type:Ítem,
    Implementación del sistema de bombeo de agua potable para Junta Administradora de Agua Potable y saneamiento La Victoria, Cantón Pujilí
    (Ingeniería Civil y Mecánica. Carrera Ingeniería Mecánica, 2025)
    Moya Figueroa Edwin Mauricio
    ;
    Santana Gómez José Carlos
    ;
    Mayorga Pardo Alex Santiago
    The project implements a potable water pumping system for the Administrative Board of La Victoria, Cotopaxi, with the aim of ensuring supply to 3,484 residents during periods of scarcity. The system takes advantage of existing water sources through pumping and pipeline networks adapted to the area's topographic conditions. The parish experiences water shortages from June to September, affecting public health and local agricultural productivity. This proposal addresses the urgent need for continuous access to treated water, reduces sanitary risks, and strengthens community resilience in the face of climate change. The selection of equipment and materials is based on elevation analysis and hydraulic losses. A detailed topographic survey was conducted, determining an initial elevation of 2,944 meters and a final elevation of 3,125 meters above sea level. Friction losses were calculated using standard methods to size galvanized steel and PVC pipes, balancing efficiency, and cost. A multistage submersible pump was selected with a flow rate of 7 liters per second and a total dynamic head of 317.75 meters, achieving an efficiency greater than 73 percent. The benefits were analyzed by comparing the costs incurred before the implementation of the pump with the savings generated afterward. The results show significant savings, with the investment expected to be recovered in approximately six years. Recommendations were established for future system upgrades and ways to extend its operational lifespan.
  • Item type:Ítem,
    Diseño y construcción de una turbo bomba accionada mediante una turbina Michell Banki para riego de cultivos en los sectores vulnerables
    (Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica. Carrera de Ingeniería Mecánica, 2018)
    Coronel Miranda, Christian Omar
    ;
    Hernández Ortíz, Jhonathan Javier
    ;
    Mayorga Pardo, Alex Santiago
    Using the parameters of waterfall “Jun Jun” it was possible to obtain a height of 9 meters and a flow of 9 lt/s. These determined the following parameters of the design: the outside diameter of the turbine wheel = 18cm, the appropriate number of blades =20 and the diameter of the pipe to be used = 4 inches. Water flows into the injector, helping propel the rotor blades and movement to the shaft. As a result, mechanical energy is transmitted by means of pulleys and this helps to generate the necessary rotation speed for the pump to work efficiently. With the construction of this machine, the efficiency of the turbine can be calculated with a controlled flow, at a stipulated height and in real conditions. The machine was constructed according to a specific location and to the conditions of this location. In order to work without any problems several changes were made to achieve the most effective design. Performance tests of the turbo pump resulted in the rotation speed provided by the turbine being between 294.56 and 694.02 and a pumping flow from 0.13lt/s to 0.36 lt/s for a height of approximately 30m. These results led to the conclusion that the design of the machine is suitable and reliable to work in the proposed location. This work arises out of the need for electrical energy in the sectors where this service is not currently available. It is an innovative project that favors the development of renewable energies, as there are many areas where they could be implemented greatly benefitting the environment. This project aims to investigate the operation of the turbo pump, which consists of a pump powered by turbine. In our case, the pump is powered by a MICHELLE BANKY turbine.
  • Item type:Ítem,
    Repotenciación del sistema de agua potable de Ulba, cantón Baños de Agua Santa mediante el uso de energía alternativa
    (Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica. Carrera de Ingeniería Civil, 2017)
    Morales Gutama, Edisson Hernán
    ;
    Guevara Robalino, Jorge Javier
    The present project contains the design of an improvement option for the current drinking water system in the urban center of the Ulba Parish in the Baños de Agua Santa canton, increasing the available volumes and, above all, water quality. It is proposed: the catchment of watersheds known as Crystal Waters; Located on the left bank of the river Ulba downstream of its waterfall, two pipes with gravity one from the uptake to the existing low reserve tank of 200 m3, which has a chlorination system, to supply the low network of the current system ; And another that reaches the suction tank, for its pumping to the existing reserve in the treatment plant, which has a capacity of 200m3; And that serves the high net of Ulba. In order for the driving lines to cross the river Ulba, a suspended overpass is designed. The project proposes a pumping system with electric motors pumps, but also proposes the implementation of a non-traditional pumping system, which works by taking advantage of the hydroelectric power of the Chamana River by means of a turbo pump: Pelton turbine - piston pump; For the operation of this equipment there is a bottom uptake in the Chamana River, a desalinator and a subsequent conduction towards the pumping equipment: Turbine - pump. The financial analysis determines, due to the existing conditions in the field, that the option of non-traditional pumping, using alternative energy, contemplated in this project, is more convenient than a pumping with electric motors. For the realization of the design, the current regulations such as those of the SENAGUA Water Secretariat and the environmental norms that govern the TULSMA construction procedures were used.
  • Item type:Ítem,
    Estudio de las propiedades termo físicas del fluido utilizado para prueba hidrostática en la fabricación de tubería de acero con costura según NTE INEN 2 470:2008 y su influencia en el sistema de presurización en empresa IPAC S.A. de la ciudad de Guayaquil
    (Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica. Carrera de Ingeniería Mecánica, 2014-07)
    Coca Jiménez, Edison Rafael
    ;
    Escobar Luna, Luis Eduardo
    El presente trabajo investigativo se centró en el análisis del fluido utilizado en las correspondientes pruebas de hermeticidad a tubería de acero con costura según indica la Norma INEN 2 470:2008 en el cual utilizando un sistema de filtrado de carácter magnético se permitió purificar el fluido, luego de realizada la filtración mencionada se comprobó su nueva categoría o nivel de limpieza utilizando el método ISO 4406/99. Por consiguiente se procedió al análisis de las propiedades termo físicas del fluido de operación tomando muestras de fluido antes y después de filtrarse, con estos valores se realizó comparaciones en cuanto a sus rendimientos y confiabilidad del sistema de presurización, estableciéndose claramente que los valores o propiedades alcanzados filtrando el fluido ofrecen mayor garantía de operatividad, cabe recalcar que para la demostración y análisis de resultados se construyó un banco de pruebas en el que se simula el sistema de presurización presente en la industria.
  • Item type:Ítem,
    Estudio de un sistema de bombeo eólico con el fin de satisfacer las necesidades de irrigación agrícola en la parroquia García Moreno, Pelileo
    (Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica. Carrera de Ingeniería Mecánica., 2013)
    Guananga Guevara, Alejandro Daniel
    ;
    Mayorga Pardo, Alex Santiago
    Esta investigación trata del estudio conversor de energía para bombeo en la utilización de irrigación agrícola, la cual ayudará a minimizar los problemas de estiaje en los meses de mayor consumo. Se utilizó varios métodos de investigación que han ayudado en el transcurso de toda la elaboración del proyecto profesional de grado, iniciando con la recolección de la información técnica del desarrollo del equipo de este tipo y el análisis de la información técnica que puede ser útil en el presente proyecto. Como también métodos matemáticos que ayudaron para la realización del diseño de los componentes mecánicos que conforman la Aerobomba, empleando ecuaciones, conceptos, principios, definiciones, leyes o normas generales. El sistema conversor de energía empieza a bombear agua a una velocidad de viento de 6.1 m/s. cabe mencionar que la rotación del rotor se acciona a través de la biela y por medio de los vástagos instalados en el interior de la tubería, la bomba de pistón situada en el fondo del pozo el cual dispone de un pistón y un sistema de válvulas que, de forma coordinada con el movimiento transmitido por los vástagos, van impulsando el agua por el interior de los tubos hasta la superficie para desembocar en un depósito. Además se realizó un estudio de suelos para determinar la demanda de agua, partiendo de las características que presentó el suelo dando como resultado un caudal de 12.6 m3 /día. Para satisfacer las necesidades de riego se utilizó un sistema de riego tecnificado (goteo) el cual presenta una eficiencia del 90% llegando a determinar que por cada planta se necesitaría 3 goteros a una distancia de 1.6 m. de planta a planta. En donde se necesita una fuerza de 348.4 N del rotor para que el sistema hidráulico entre en funcionamiento, en donde el rotor presenta una potencia disponible de 805.8 N. Con la cual se determinó el diámetro del rotor que es de 2.5 m. con un número de palas igual a 12 de espesor igual a 1.6 mm en acero galvanizado. Con una área de barrido de 4.9 m.