Ingeniería Civil y Mecánica
URI permanente para esta comunidadhttp://repositorio.uta.edu.ec/handle/123456789/898
Examinar
3 resultados
Resultados de la búsqueda
Item type:Ítem, La adición de aserrín y poliestireno en la elaboración de bloques alivianados para viviendas unifamiliares y su efecto en la variación de temperatura y acondicionamiento acústico en el cantón Ambato, provincia de Tungurahua(Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil, 2019) ;Morales Apráez, Jorge LuisGuevara Robalino, Jorge JavierIn the development of the present investigation, in the first instance tests were performed on the aggregates to form the masonry according to an initial dosage that allowed us to obtain good results at compression based on the INEN 3066 norm. The study addressed, opted for the substitution of the chasqui by 15%, 25% 50% and 75% sawdust, from which it was obtained that the handcrafted blocks have an approximate resistance of 10.96 kg / cm² and that under this parameter the blocks of 15 and 25% comply with the ranges established as original dosage unlike the artisan blocks, while the one with 50 and 75% sawdust is discarded, due to its very low compressive strength. On the other hand, within the present and following the Chilean regulations NCH 849 and NCH 851, a thermal and acoustic test was carried out, obtaining as a result that the block with 75% sawdust has greater thermal insulation capacity unlike the other blocks tested, while the block with 25% dosing of the aggregate has greater acoustic insulation capacity. Within the study addressed, the process carried out for both manufacturing and laboratory tests is clearly indicated, which generated feasible results, framed within the normative statutes for construction.Item type:Ítem, La adición de botellas plásticas PET en la elaboración de bloques alivianados para viviendas unifamiliares y su efecto en la variación de temperatura y acondicionamiento acústico en el cantón Ambato, provincia de Tungurahua(Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil, 2019) ;Paguay Córdova, Edison AndrésGuevara Robalino, Jorge JavierThe present investigation has been carried out with the purpose of knowing the influence that the blocks of work with the plastic have with the temperature and the acoustic conditioning in the middle of a hermetic chamber; for what was done and a dosage was elaborated applying the Optima Density Method for the elaboration of Type B blocks according to the NTE INEN 3066 standard, which served as the basis to elaborate the other dosages with the addition of 15, 25, 50 and 75% of PET plastic replacing the coarse aggregate (Chasqui) and later elaborated type walls of 1.00 mx 0.70 m. As it increases the percentage addition of PET material, the resistance to compression decreases by 4, 12, 30 and 50%, however it is still superior to the traditional artisan block; On the other hand, the more the PET material is added, the better the thermal and acoustic variation in relation to a traditional block and block wall, indicating that the correct addition of the PET material has a significant influence on the temperature control and sound insulation in the environments of a dwelling by not allowing the passage of heat and noise from one environment to another; being the best specimen resulting from the thermal tests the wall made with block with 50% PET and the block wall with 75% PET for the acoustic test.Item type:Ítem, La adición de bolsas plásticas en la elaboración de bloques alivianados para viviendas unifamiliares y su efecto en la variación de temperatura y acondicionamiento acústico en el cantón Ambato, provincia de Tungurahua(Universidad Técnica de Ambato. Facultad de Ingeniería Civil y Mecánica, Carrera de Ingeniería Civil, 2019) ;Cando Pichucho, Carlos XavierChérrez Gavilanes, Diego SebastiánThe present experimental work evaluated the use of the crushed plastic bags in the manufacture of relieved blocks, to determine the variation of temperature and acoustic conditioning. In the first place, a material dosage was elaborated in which the coarse aggregate was replaced by 15%, 25%, 50% and 75% of plastic bags crushed, which was used to make the blocks. The blocks were tested under compression, in which it was found that the block with 15% of crushed plastic bags obtained a compression resistance value of 3.78 Mpa which reveals that meets the minimum value of 3.5 Mpa of compressive strength proposed by Standard NTE INEN 3066. Then, walls were made with the blocks, which were placed inside a chamber to evaluate the temperature variation and acoustic conditioning by temperature and sound sensors, and the Xplorer GLX equipment, where it was proved that the wall with 50% of crushed of plastic bags presents the best temperature variation with an insulation of 34.91 ºC and the wall with 15% presents the best acoustic conditioning with 47.35 dBA. Finally, it was concluded that the block with 15% of crushed plastic bags presents the best performance in terms of compression resistance, temperature variation, and acoustic conditioning to be used in single-family homes in Ambato canton, Tungurahua province.
